Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L6472PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating at a supply voltage range of 8-45V. It features a max output current of 7A and uses NMOS technology for stepper motor control applications. The package style is small outline with heat sink, making it suitable for surface mount designs in various electronic systems.
Median Price
$5.588
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$6.660
100+ parts
$4.370
1k+ parts
$4.100
10k+ parts
-
Mouser Electronics
$12.160
$8.160
Element14
$15.810
$10.560
$10.440
Arrow
$4.326
$4.240
Verical
Chip1Stop
$4.516
Digiode
$5.077
Nova Conductors
$6.900
Chip Stock
Vyrian
Anansix
TME
$7.260
NAC Semi
$6.110
Semtec, LLC
Modulus Dynamics
$2.952
Ampacity Inc.
$3.680
Semicontronic
$3.588
$3.570
Aztec Data Supply Inc.
$4.550
Corphita
$4.810
Continental Prestige Electronics
$7.740
$5.100
Vigor
$8.150
Advanced Electronics
$13.103
$12.447
Microchip USA
$16.100
$15.870
$15.760
$15.640
Corohmni
$21.077
IDEA Electronic Components Group
$22.235
$20.011
MKK Technologies
$41.811
DigiPath Technology Company
Lixinc
Netroflash
$6.762
$6.555
$6.417
Argo Parts USA
Eastek
$7.120
Futuretech Components
Parana Technologies
$26.585
Kepictronics
The use of plastic/epoxy as the package body material makes the product lightweight and cost-effective.
Being surface mountable allows for easy integration onto PCBs, saving space and enabling efficient assembly.
The nominal supply voltage of 36 V provides a suitable power range for the device's operation.
Having 36 terminals enables connectivity with various components for comprehensive control capabilities.
The high maximum output current of 7 A allows for driving powerful stepper motors effectively.
Using NMOS technology ensures efficient power consumption and high performance in controlling stepper motors.
Motion Control ICs L6472PDTR attributes and parameters. Explore more Motion Control ICs devices from STMicroelectronics
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
L6472PDTR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Molding Chg 25/Jun/2018
PCN Packaging - Box Label Chg 28/Jul/2016 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taitron Components
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
MP6540HGU-Z
Monolithic Power Systems
BRUSHLESS DC MOTOR CONTROLLER;
IKCM15L60GAXKMA1
Infineon Technologies
IKCM15L60GAXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 30A. Ideal for AC motor control applications in industrial settings due to its temp range -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
A4960KJPTR-A-T
Allegro MicroSystems
Allegro MicroSystems' A4960KJPTR-A-T is a Motion Control IC with 32 terminals, suitable for Brushless DC Motor control. Operating temperature ranges from -40 to 150°C, with supply voltage of 3-5.5V. Its compact square package makes it ideal for automotive applications.
BD62220AEFV-E2
ROHM
ROHM's BD62220AEFV-E2 is a small outline motion control IC with 28 terminals, operating voltage range of 8-28 V, and max output current of 2.8 A. Ideal for brush DC motor control applications, it offers a temp range of -25 to 85 °C and compact dimensions (9.7mm x 4.4mm x 1mm).
FNB33060T
FNB33060T by Onsemi is a Motion Control IC with 27 terminals, operating temperature range of -40 to 125°C. It supports a max output current of 60A and nominal voltage up to 300V. Ideal for automotive applications as an AC motor controller due to its hybrid technology and flange mount package style.
TMC2208-LA-T
Trinamic Motion Control & Kg
Trinamic's TMC2208-LA-T is a motion control IC with 1 function, suitable for stepper motor control. It operates at supply voltages from 5.5V to 36V, with a max output current of 2.5A. This automotive-grade IC has a package style of chip carrier and very thin profile, making it ideal for compact applications.
DRV8313PWPR
Texas Instruments
DRV8313PWPR by Texas Instruments is a motion control IC with 28 terminals and a supply voltage range of 8-60V. It features a max output current of 3A, suitable for brushless DC motor controllers. With a compact rectangular package style and industrial temperature grade, it is ideal for applications requiring precise motor control in harsh environments.
MCP8024-H/PT
MCP8024-H/PT by Microchip is a Motion Control IC with 48 terminals, operating from -40 to 150 °C. It's a Brushless DC Motor Controller for automotive applications, supporting supply voltage range of 6-28 V and low current consumption of 0.5 mA.
MAX14871EUE+T
Analog Devices
BRUSH DC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed;
FSBB30CH60CT
Fairchild Semiconductor
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel;
BA6846FVE2
ROHM's BA6846FVE2 is a Motion Control IC with 5V supply voltage, 0.5A output current, and 14 terminals. Ideal for BRUSH DC MOTOR CONTROL applications, it operates b/w -25 to 70°C with a compact rectangular package style. Suitable for surface mount assembly, this IC offers precise control in various motion control systems.
DRV8836DSSR
DRV8836DSSR by Texas Instruments is a Motion Control IC with 12 terminals and a supply voltage range of 2-7V. It offers a max output current of 1.5A, operates in industrial temperature grades (-40 to 85°C), and is ideal for brush DC motor control applications requiring precise power management in compact spaces.
DRV8332DKD
Texas Instruments' DRV8332DKD is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at -40 to 85°C, with Vsup ranging from 10.8V to 52.5V and max output current of 13A. The package style is SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH in RECTANGULAR shape made of PLASTIC/EPOXY material.
FNB41060
FNB41060 by Onsemi is a motion control IC with 1 function. It operates at a nominal voltage of 15V and has a max output current of 15A. This IC is commonly used as an AC motor controller in various applications.
LTC1695CS5#TRMPBF
Linear Technology
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8847RTER
DRV8847RTER by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 18V, and temperature grade suitable for automotive applications. It features a compact square package style with very thin profile and can handle temperatures from -40°C to 125°C. Ideal for stepper motor control in various electronic systems.
VNH7070AY
STMicroelectronics
VNH7070AY by STMicroelectronics is a Motion Control IC with AEC-Q100 screening. It operates at 4-28 V, supporting up to 6 mA supply current. Ideal for brush DC motor control applications due to its small outline package and dual terminal position.
IM818LCCXKMA1
AC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
L6205N
STMicroelectronics L6205N is a Motion Control IC with 48V supply, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a rectangular package style with 20 terminals in an in-line configuration. Operating from -40 to 150°C, this stepper motor controller suits various motion control needs.
E-L6219R
STMicroelectronics E-L6219R is a Motion Control IC with 24 terminals, operating voltage of 4.75-5.25 V, and max output current of 1 A. Ideal for stepper motor control applications due to its bipolar technology and compact small outline package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6470HTR
L6470HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring precise motion control.
L6470PDTR
L6470PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage range of 8-45V, and output current up to 7A. It is a Stepper Motor Controller in a small outline package suitable for various motion control applications. The IC features dual terminal position, matte tin finish, and gull wing form factor for efficient performance.
L6470H
L6470H by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with a heat sink, making it ideal for compact designs requiring precise motion control.
L6470PD
STMicroelectronics L6470PD is a Motion Control IC with 36V Vsup, 7A max output current, and bipolar technology. Ideal for stepper motor control applications, it features a small outline package, dual terminal position, and gull wing form factor.
L6472H
STEPPER MOTOR CONTROLLER; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
L6474PDTR
L6474PDTR by STMicroelectronics is a Motion Control IC with 36 terminals and a supply voltage range of 8-45V. It features a max output current of 7A, NMOS technology, and is used as a Stepper Motor Controller in various applications. The package style is small outline with heat sink, making it suitable for surface mount applications.
L6472PD
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Voltage (Vsup): 45 V;
L6474PD
L6474PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 3.3V supply voltage and supporting up to 7A output current. It is a Stepper Motor Controller in a small outline package suitable for surface mount applications. The IC features NMOS technology, Gull Wing terminal form, and has a max supply voltage of 45V.
L6472HTR
L6472HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at 8-36V. It features a max output current of 7A and technology NMOS for stepper motor control applications. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it suitable for compact designs.
L6474HTR
L6474HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at 3.3V nominal voltage and supporting a max output current of 7A. This Stepper Motor Controller has a compact rectangular package style, suitable for surface mount applications in various motion control systems.
L6474H
L6474H by STMicroelectronics is a motion control IC with 28 terminals, operating at 3.3V nominal voltage and supporting up to 7A output current. This stepper motor controller has a small outline package shape, matte tin terminal finish, and Gull Wing terminal form. It is ideal for applications requiring precise motor control in compact spaces.
L6470Q
STEPPER MOTOR CONTROLLER; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Form: NO LEAD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved