Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics L6472H is a Motion Control IC with 36V Vsup, 7A max output current, and 45V max supply voltage. Ideal for stepper motor control applications due to its small outline package and dual terminal position.
Median Price
$11.189
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
$8.082
100+ parts
-
1k+ parts
10k+ parts
Verical
$8.128
Mouser Electronics
$14.250
$9.590
$8.950
DigiKey
$14.570
$9.857
$9.007
Avnet
EBV Elektronik
Digiode
$4.222
Nova Conductors
$4.650
TME
$8.720
$6.330
Chip Stock
Anansix
Vyrian
IBS Electronics
$9.579
$9.425
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
Ampacity Inc.
$2.820
Semicontronic
$2.750
$2.735
Corphita
$4.000
Argo Parts USA
$4.500
Continental Prestige Electronics
$4.410
Netroflash
$4.557
IDEA Electronic Components Group
$6.217
$5.596
Aztec Data Supply Inc.
$9.560
MKK Technologies
$11.691
DigiPath Technology Company
Microchip USA
$21.196
Corohmni
$22.149
S.R.D Solutions
Lixinc
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Parana Technologies
$7.434
Eastek
GreenTree Electronics
PLASTIC/EPOXY material provides good insulation and protection for the internal components, ensuring reliability and durability.
Surface mount technology allows for easy and convenient installation on circuit boards, saving space and making assembly more efficient.
The 36V supply voltage is suitable for a wide range of motion control applications, providing sufficient power for smooth and efficient operation.
Having 28 terminals allows for versatile connectivity options and integration with other components in the system.
NMOS technology offers high efficiency and performance, making the motion control ICs more energy-efficient and reliable.
Motion Control ICs L6472H attributes and parameters. Explore more Motion Control ICs devices from STMicroelectronics
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
L6472H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSB50450BS
FSB50450BS by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 150 °C. It has a max output current of 5 A and supports AC motor control applications. The IC is surface mountable, with a rectangular package style and nominal voltage range of 13.5-16.5 V.
L6206D
STMicroelectronics
STMicroelectronics L6206D is a Motion Control IC with 24 terminals, operating voltage of 8-52V. It features BCDMOS technology, peak output current of 5.6A, and temp range -40 to 150°C. Ideal for automotive applications as a stepper motor controller in compact design with small outline package.
A3984SLP-T
Allegro MicroSystems
Allegro MicroSystems' A3984SLP-T is a Motion Control IC with 24 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2A and power supplies of 3.3/5V. The IC is designed for surface mount applications in various industries requiring precise motion control.
FSB50550ASE
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 5 A; Terminal Form: GULL WING;
IR3101
International Rectifier
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 9; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
DRV8833CRTET
DRV8833CRTET by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. It is ideal for industrial applications requiring precise control over brush DC motors in compact designs due to its small package size and low supply current requirements.
DRV8424PWPR
DRV8424PWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating temperature range of -40 to 125°C, and max output current of 2.5A. It is a Stepper Motor Controller suitable for automotive applications due to its compact size (9.7mm x 4.4mm) and dual terminal position design, making it ideal for precise motion control in tight spaces.
TMC2300-LA-T
Analog Devices
Analog Devices' TMC2300-LA-T is a Motion Control IC with 30 terminals, operating voltage range of 2-11V, and output current up to 1.7A. Ideal for stepper motor control applications due to its compact square package shape and low profile design. Operating temperature from -40°C to 125°C makes it suitable for various industrial environments.
DRV8886ATPWPR
DRV8886ATPWPR by Texas Instruments is a motion control IC with 24 terminals and a small outline, heat sink package. It operates in temperatures ranging from -40 to 125°C and can handle a max output current of 3A. This IC is commonly used as a stepper motor controller in automotive applications.
A3950SEUTR-T
Allegro MicroSystems' A3950SEUTR-T is a Motion Control IC with 8-36V power supplies, 2.8A output current, and -20 to 85°C operating temperature range. Ideal for Brushless DC Motor control applications due to its compact square package and quad terminal position.
DRV2603RUNT
Texas Instruments' DRV2603RUNT is a Motion Control IC with 10 terminals, operating voltage of 2.5-5.2V, and temp range -40 to 85°C. Ideal for brush DC motor control applications due to its compact square chip carrier design and very thin profile package style. Suitable for industrial use with nickel palladium gold terminal finish and moisture sensitivity level of 2.
LM628N-8/NOPB
Texas Instruments' LM628N-8/NOPB is a Motion Control IC with 28 terminals, operating at 5V. It features a rectangular package style, matte tin finish, and supports brush DC motor control applications. With an industrial temperature grade range of -40 to 85°C, it's ideal for precise motion control systems requiring a supply voltage b/w 4.5V to 5.5V.
FNB41560
The Onsemi FNB41560 is a Motion Control IC with 15V nominal voltage, 22A max output current, and 26 terminals. Ideal for AC motor control applications due to its flange mount package style and dual terminal position. Operates within a supply voltage range of 13.5V to 16.5V, making it versatile for various motion control systems.
PSS10SA2FT
Mitsubishi Electric
AC MOTOR CONTROLLER;
FSB50250S
FSB50250S by Onsemi is a Motion Control IC with 23 terminals, operating voltage range of 13.5V to 16.5V. It features a rectangular surface mount package style, ideal for AC motor control applications due to its hybrid technology and compact dimensions of 29mm x 12mm x 3.5mm.
NFAQ1560R43TL
BRUSHLESS DC MOTOR CONTROLLER;
A3936SED
A3936SED by Allegro MicroSystems is a motion control IC with a square package and 44 terminals. It operates at a nominal voltage of 5V and has a max output current of 3A. This IC is commonly used as a brushless DC motor controller.
DRV8702DQRHBRQ1
DRV8702DQRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a package style of CHIP CARRIER and is designed for BRUSH DC MOTOR CONTROL in harsh environments with an operating temperature range from -40°C to 125°C.
L6228PDTR
L6228PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 2.8A. It is a Stepper Motor Controller suitable for automotive applications due to its BCDMOS technology and wide temperature range (-40 to 150°C).
A3988SJPTR-T
Allegro MicroSystems' A3988SJPTR-T is a Motion Control IC with 4 functions, suitable for Stepper Motor Controller applications. It operates at 3.3V nominal voltage and supports power supplies of 3.3/5,36V. The package style includes flatpack, heat sink/slug, low profile, fine pitch design for compact integration in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6470HTR
L6470HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring precise motion control.
L6470PDTR
L6470PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage range of 8-45V, and output current up to 7A. It is a Stepper Motor Controller in a small outline package suitable for various motion control applications. The IC features dual terminal position, matte tin finish, and gull wing form factor for efficient performance.
L6470H
L6470H by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with a heat sink, making it ideal for compact designs requiring precise motion control.
L6470PD
STMicroelectronics L6470PD is a Motion Control IC with 36V Vsup, 7A max output current, and bipolar technology. Ideal for stepper motor control applications, it features a small outline package, dual terminal position, and gull wing form factor.
L6474PDTR
L6474PDTR by STMicroelectronics is a Motion Control IC with 36 terminals and a supply voltage range of 8-45V. It features a max output current of 7A, NMOS technology, and is used as a Stepper Motor Controller in various applications. The package style is small outline with heat sink, making it suitable for surface mount applications.
L6472PD
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Voltage (Vsup): 45 V;
L6474PD
L6474PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 3.3V supply voltage and supporting up to 7A output current. It is a Stepper Motor Controller in a small outline package suitable for surface mount applications. The IC features NMOS technology, Gull Wing terminal form, and has a max supply voltage of 45V.
L6472PDTR
L6472HTR
L6472HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at 8-36V. It features a max output current of 7A and technology NMOS for stepper motor control applications. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it suitable for compact designs.
L6474HTR
L6474HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at 3.3V nominal voltage and supporting a max output current of 7A. This Stepper Motor Controller has a compact rectangular package style, suitable for surface mount applications in various motion control systems.
L6474H
L6474H by STMicroelectronics is a motion control IC with 28 terminals, operating at 3.3V nominal voltage and supporting up to 7A output current. This stepper motor controller has a small outline package shape, matte tin terminal finish, and Gull Wing terminal form. It is ideal for applications requiring precise motor control in compact spaces.
L6470Q
STEPPER MOTOR CONTROLLER; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Form: NO LEAD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved