Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NVATS5A106PLZT4G by Onsemi is a P-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 30mJ, suitable for high-power operations. With an operating temperature range from -55 to 175 °C, it offers reliable performance in various environments.
Median Price
$0.560
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Flip Electronics (Authorized)
Chip Stock
Vyrian
Flip Electronics
Digiode
AZTECH Wire
$21.840
Component Stockers USA
$99.990
Perfect Parts
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
SupplyDigital Components
Corohmni
Problanco Electronics
Corphita
UHIMA Technologies
The plastic/epoxy material used for the package body provides durability and protection for the internal components, making the product reliable for long-term use.
P-channel FETs are known for their lower ON-state resistance, higher current handling capability, and better thermal performance compared to N-channel FETs, making them suitable for a variety of power applications.
The built-in diode helps prevent reverse current flow, making the transistor suitable for applications where backflow protection is required.
Designed for switching applications, this FET is optimized for fast switching speeds and efficient power control, making it ideal for use in power management systems.
With a low ON-resistance, this FET minimizes power losses and improves efficiency in high-current circuits, making it an excellent choice for power applications.
Power Field Effect Transistors (FET) NVATS5A106PLZT4G attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NVATS5A106PLZT4G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
NDT452AP
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Pulsed Drain Current (IDM): 15 A; Package Body Material: PLASTIC/EPOXY;
IRLL110TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE; Additional Features: LOGIC LEVEL COMPATIBLE;
IXTA96P085T
Littelfuse
The Littelfuse IXTA96P085T is a P-CHANNEL FET with 85V DS breakdown voltage and 96A max drain current. Ideal for switching applications, it features a built-in diode, 300A pulsed drain current, and 0.013 ohm max on resistance. Suitable for enhancement mode operation in high-power systems with an operating temperature range of -55 to 150°C.
JANTX2N6796
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
IRF6215STRLPBF
Infineon Technologies
IRF6215STRLPBF by Infineon Technologies is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 44A and EAS of 310mJ, with an operating temperature up to 175°C. This SINGLE configuration transistor has 0.29 ohm RDS(on) and can handle a max ID of 13A.
BSC016N06NSATMA1
Infineon's BSC016N06NSATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a max IDM of 400A and EAS of 380mJ, ensuring efficient operation. With a drain-source on resistance of 0.0016 ohm and operating temperature up to 150°C, it offers high performance in a small outline package.
FQT4N20LTF
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; JESD-30 Code: R-PDSO-G4; Moisture Sensitivity Level (MSL): 1;
FDMS86252L
FDMS86252L by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, 30A IDM, and 0.056 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 50W and can withstand temperatures up to 150°C.
LND150N8-G
Microchip Technology
LND150N8-G by Microchip is a N-CHANNEL FET with 0.03A IDM, ideal for SWITCHING applications. Operating in DEPLETION MODE, it has a 1.6W power dissipation and 1000 ohm RDS(on). With a peak temperature of 260C, it's suitable for surface mount designs in various electronic systems.
MSCSM170AM11CT3AG
MSCSM170AM11CT3AG by Microchip Technology is a N-CHANNEL FET with 1700V DS Breakdown Voltage, 480A IDM, and 0.0113 ohm RDS(on). It is used for SWITCHING applications in SERIES CONNECTED configuration. Operating from -40 to 175 °C, it features METAL-OXIDE SEMICONDUCTOR technology and SILICON CARBIDE material.
IRFS3306TRLPBF
IRFS3306TRLPBF by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 620A IDM, 184mJ EAS, and 0.0042 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 230W at 175°C.
IRF3205PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Case Connection: DRAIN; No. of Elements: 1;
NTMFS5C628NLT1G
NTMFS5C628NLT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0033 ohm RDS(on). It operates in Enhancement Mode and has a max power dissipation of 110W. Ideal for high-power applications requiring efficient switching capabilities.
IRF640SPBF
Vishay Intertechnology
Vishay Intertechnology's IRF640SPBF is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has a max power dissipation of 130W.
IRFB4115PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 380 W; Avalanche Energy Rating (EAS): 830 mJ; Maximum Drain Current (Abs) (ID): 104 A;
FDD8424H_F085
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
IRLR024NTRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Additional Features: LOGIC LEVEL COMPATIBLE, AVALANCHE RATED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FDMS86101
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
BSP318SH6327XTSA1
Infineon's BSP318SH6327XTSA1 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 10.4A Pulsed Drain Current. Ideal for automotive applications, it features a built-in diode, 0.15 ohm On Resistance, and 260°C Peak Reflow Temperature.
SUM110P06-07L-E3
SUM110P06-07L-E3 by Vishay Intertechnology is a P-channel power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 240A and an avalanche energy rating of 281mJ. This transistor is commonly used for switching applications in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NVATS4A101PZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 36 W; Terminal Finish: TIN BISMUTH; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NVATS4A102PZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Maximum Drain Current (ID): 44 A; Case Connection: DRAIN;
NVATS4A103PZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 30 V;
NVATS4A104PZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 72 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH;
NVATS5A107PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Minimum Operating Temperature: -55 Cel; Operating Mode: ENHANCEMENT MODE;
NVATS5A108PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 72 W; No. of Elements: 1; Maximum Drain Current (ID): 77 A;
NVATS5A112PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN BISMUTH; Maximum Pulsed Drain Current (IDM): 81 A; Minimum DS Breakdown Voltage: 60 V;
NVATS5A113PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Avalanche Energy Rating (EAS): 95 mJ; Package Body Material: PLASTIC/EPOXY; Maximum Pulsed Drain Current (IDM): 114 A;
NVATS5A114PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 72 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain-Source On Resistance: .016 ohm;
NVATS5A302PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 84 W; Avalanche Energy Rating (EAS): 197 mJ; Maximum Drain-Source On Resistance: .018 ohm;
NVATS5A304PLZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 108 W; Package Body Material: PLASTIC/EPOXY; Moisture Sensitivity Level (MSL): 1;
NVATS68301PZT4G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Terminal Position: SINGLE; Package Style (Meter): SMALL OUTLINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved