Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTD30N02G by Onsemi is a Power FET with N-CHANNEL polarity, suitable for SWITCHING applications. It features a 24V DS Breakdown Voltage, 30A Drain Current, and 0.0145 ohm On Resistance. With a max power dissipation of 75W and operating temperature of 150 °C, it is ideal for high-power switching circuits.
Median Price
$0.229
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.225
1k+ parts
$0.186
10k+ parts
$0.166
Verical
$0.233
Digiode
$0.175
Vyrian
Corphita
Corohmni
$0.184
AZTECH Wire
$21.250
Metaverse IC Inc.
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Continental Prestige Electronics
$0.169
Kulean Microsystems
SupplyDigital Components
Perfect Parts
UHIMA Technologies
TANS Electronics
This material is lightweight, durable, and cost-effective, making it a good choice for a variety of applications.
N-channel FETs typically have lower on-resistance and higher efficiency compared to P-channel FETs, making them suitable for high-performance switching applications.
The built-in diode allows for more efficient switching and protects the circuit from voltage spikes, improving overall reliability.
Designed specifically for switching applications, this FET provides fast turn-on and turn-off times, reducing power losses and improving efficiency.
Surface-mount technology allows for easy and compact integration onto circuit boards, saving space and simplifying assembly processes.
Low on-resistance leads to lower power dissipation and higher efficiency in the switching circuit.
Power Field Effect Transistors (FET) NTD30N02G attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
NTD30N02G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Obsolescence/ EOL - Multiple Devices 03/Apr/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS303C
Idec
ROTARY SWITCH;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Promax-johnton
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
International Semiconductor
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
RFD16N05LSM9A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; JEDEC-95 Code: TO-252AA; Terminal Form: GULL WING;
IRLML6401
International Rectifier
IRLML6401 by International Rectifier is a P-CHANNEL FET with 12V DS Breakdown Voltage and 34A IDM. Ideal for SWITCHING applications, it features a built-in diode, 33mJ EAS rating, and -55 to 150 °C operating temperature range.
IRF9530
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ZXMP6A17GTA
Diodes Incorporated
ZXMP6A17GTA by Diodes Inc. is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 13.7A IDM, 4.1A ID, and 0.125 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 3.9W and can withstand temperatures up to 150°C.
IRF3205STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Minimum DS Breakdown Voltage: 55 V; Additional Features: AVALANCHE RATED, HIGH RELIABILITY, ULTRA LOW RESISTANCE;
IRF530A
Onsemi
The Onsemi IRF530A is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 14A Max ID. Ideal for SWITCHING applications, it features a 0.11 ohm Drain-Source Resistance and operates in ENHANCEMENT MODE up to 175°C.
IRFP450PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; JESD-609 Code: e3; Avalanche Energy Rating (EAS): 760 mJ;
IRLML0100TRPBF-1
Infineon Technologies
Infineon's IRLML0100TRPBF-1 is a N-channel Power FET with 100V DS breakdown voltage and 7A IDM. Ideal for enhancement mode operation, it features a built-in diode, 0.22 ohm RDS(on), and is suitable for surface mount applications in power electronics.
NDT452AP
NDT452AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage and 5A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -65 to 150 °C, it has 0.065 ohm On Resistance and can handle up to 15A Pulsed Drain Current.
IRFP460
Vishay Intertechnology's IRFP460 is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 80A IDM, 960mJ EAS, and 0.27 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 280W at up to 150°C.
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.9 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 60 V;
SUM90P10-19L-E3
Vishay Intertechnology's SUM90P10-19L-E3 is a P-channel power FET with 100V DS breakdown voltage and 90A IDM. Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With a max power dissipation of 375W, this MOSFET has a drain-source on resistance of 0.019 ohm and can withstand temperatures from -55 to 175°C.
AUIRF7759L2TR
AUIRF7759L2TR by Infineon is a N-CHANNEL FET with 75V DS Breakdown Voltage and 640A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0023 ohm On Resistance, and operates in ENHANCEMENT MODE.
FQP47P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; JESD-30 Code: R-PSFM-T3; Maximum Pulsed Drain Current (IDM): 188 A;
PMV20ENR
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.94 W; Transistor Element Material: SILICON; Terminal Form: GULL WING;
FDMS86101DC
FDMS86101DC by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 200A IDM, and 0.0075 ohm RDS(on). Ideal for SWITCHING applications, it features a built-in diode, operates in ENHANCEMENT MODE, and has a max power dissipation of 125W.
Infineon's IRF3205STRLPBF is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 390A IDM, 264mJ EAS, and 0.008 ohm RDS(on). With ENHANCEMENT MODE operation and DRAIN connection, it offers high power dissipation of 200W in a SMALL OUTLINE package.
NCV8406ASTT1G
NCV8406ASTT1G by Onsemi is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 0.24 ohm Drain-Source On Resistance, and 1.81W Power Dissipation. With a PLASTIC/EPOXY body and GULL WING terminals, it operates in temperatures from -40 to 150 °C.
IRF7507TRPBF
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Maximum Pulsed Drain Current (IDM): 19 A; Package Style (Meter): SMALL OUTLINE;
IRFR540ZTRPBF
IRFR540ZTRPBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 140A and EAS of 39mJ, operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals offers 0.0285 ohm RDS(ON) and 91W Pd max.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTD3055L104T4G
NTD3055L104T4G by Onsemi is a power FET with 60V DS breakdown voltage, 45A IDM, and 0.104 ohm RDS(on). It is an N-channel transistor for switching applications. Operating in enhancement mode, it has a max power dissipation of 48W and can handle up to 175°C temperature.
NTD3055-094T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
NTD3055L104-1G
NTD3055L104-1G by Onsemi is a power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max pulsed drain current of 45A.
NTD3055L104G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; JESD-30 Code: R-PSSO-G2; Terminal Form: GULL WING;
NTD3055L170T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Peak Reflow Temperature (C): 260; Operating Mode: ENHANCEMENT MODE;
NTD3055L104T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 12 A;
NTD3055L104
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Qualification: Not Qualified; JESD-609 Code: e0;
NTD3055L104-001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Peak Reflow Temperature (C): 235; Maximum Drain-Source On Resistance: .104 ohm;
NTD3055-150T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Minimum DS Breakdown Voltage: 60 V; Maximum Turn Off Time (toff): 75 ns;
NTD3055L104-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Terminal Finish: TIN LEAD; Minimum DS Breakdown Voltage: 60 V;
NTD3055-094G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; No. of Elements: 1; Case Connection: DRAIN;
NTD3055-150-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28.8 W; Maximum Turn Off Time (toff): 75 ns; Package Body Material: PLASTIC/EPOXY;
NTD3055-150-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
NTD3055-150G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PSSO-G2;
NTD3055-094-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Transistor Element Material: SILICON; Terminal Form: THROUGH-HOLE;
NTD3055-094T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Operating Mode: ENHANCEMENT MODE; JESD-609 Code: e0;
NTD3055-150T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
NTD3055-150T4H
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Maximum Time At Peak Reflow Temperature (s): 30; No. of Terminals: 2;
NTD3055-094
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 175 Cel;
NTD3055-094-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved