Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
Median Price
$0.493
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.360
100+ parts
$0.569
1k+ parts
$0.404
10k+ parts
$0.320
Mouser Electronics
$1.460
$0.609
-
Newark
$1.480
$0.687
Future Electronics
$0.240
Arrow
$0.347
Verical
$0.350
Chip1Stop
$0.326
Farnell
Element14
$0.807
$0.574
EBV Elektronik
Digiode
$0.428
Maritex
$0.725
$0.416
Nova Conductors
$1.000
TME
$1.380
$0.558
$0.392
$0.340
IBS Electronics
$0.450
NAC Semi
$0.490
Chip Stock
Vyrian
Avant Electronics Limited
LIBRA Elektronik GmbH
Bristol Electronics
ComSIT Distribution GmbH
Florida Circuit
North Shore Components
NexGen Digital
Semicontronic
$0.257
$0.251
$0.249
Ampacity Inc.
Corohmni
$0.302
Corphita
$0.405
Continental Prestige Electronics
$0.414
$0.406
Argo Parts USA
$0.402
Benley Electronics
$0.500
Component Stockers USA
$0.790
$0.540
$0.380
Aztec Data Supply Inc.
$1.270
Perfect Parts
RC Electronics
Futuretech Components
Kepictronics
TANS Electronics
Infinite Electronics LLP (Excess)
Problanco Electronics
Authorized Procurement Solutions
Netroflash
$0.980
$0.950
$0.930
Kulean Microsystems
UHIMA Technologies
SupplyDigital Components
Advanced Electronics
Power Field Effect Transistors (FET) NTD3055-094T4G attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NTD3055-094T4G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
PCN Assembly/Origin - Mult Dev 18/Dec/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Surge Components
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
IRFP460
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Qualification: Not Qualified; Maximum Turn Off Time (toff): 228 ns;
IRF7304TRPBF
Infineon Technologies
IRF7304TRPBF by Infineon Technologies is a P-CHANNEL FET with 20V DS Breakdown Voltage and 3.6A ID. It features a built-in diode, 0.09 ohm RDS(on), and operates in enhancement mode. Ideal for power management applications requiring high drain current capabilities in compact designs.
IRF3205ZPBF
IRF3205ZPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 440A IDM, 250mJ EAS, and 0.0065 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 170W at 175°C.
CSD16301Q2
Texas Instruments
CSD16301Q2 by Texas Instruments is a N-CHANNEL Power FET with 25V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.3W. This SMALL OUTLINE transistor has a -55 to 150 °C operating temperature range and 0.034 ohm Drain-Source On Resistance.
IRLML9301TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: Matte Tin (Sn);
FDD4685-F085
FDD4685-F085 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.027 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it has a max power dissipation of 69W and can withstand temperatures up to 175°C.
IRF9540PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Operating Temperature: 175 Cel; Maximum Drain Current (ID): 19 A;
IRFR5305TRLPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; JESD-609 Code: e3; Terminal Form: GULL WING;
FDD4685_F085
Fairchild Semiconductor
Fairchild Semiconductor's FDD4685_F085 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, -55 to 175 °C operating temp range, and 0.027 ohm Drain-Source On Resistance.
BSP295H6327XTSA1
BSP295H6327XTSA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 7.2A max pulsed drain current. It is used in enhancement mode applications, featuring a built-in diode, 0.5 ohm max RDS(on), and AEC-Q101 standard compliance for automotive electronics.
FDS4559
FDS4559 by Onsemi is a Power FET with N-Channel and P-Channel types, ideal for switching applications. It features a 60V min DS breakdown voltage, 20A max pulsed drain current, and 0.055 ohm max drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 175°C.
IRF840SPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Elements: 1;
IRFZ44NSTRL
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-263AB; Qualification: Not Qualified; Package Shape: RECTANGULAR;
STH2N120K5-2AG
STMicroelectronics
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 245; Terminal Finish: MATTE TIN;
RFD16N05LSM9A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; JEDEC-95 Code: TO-252AA; Terminal Form: GULL WING;
STP80NF10FP
STP80NF10FP by STMicroelectronics is a N-CHANNEL FET with 100V DS Breakdown Voltage. It has 152A IDM and 350mJ EAS, ideal for SWITCHING applications. Operating in ENHANCEMENT MODE, it offers 0.015 ohm Drain-Source On Resistance and can handle up to 40W power dissipation.
AOD4185
Alpha & Omega Semiconductor
AOD4185 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 40V DS Breakdown Voltage, 115A IDM, and 0.015 ohm RDS(ON). Ideal for power management applications requiring high drain current capabilities in a compact SMALL OUTLINE package.
FDD6637
FDD6637 by Onsemi is a P-CHANNEL Power FET with 35V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 61mJ, with an ID of 55A and 0.0116 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE at up to 150°C, making it suitable for high-power switching tasks.
FDS8984_F085
FDS8984_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 2 ELEMENTS WITH BUILT-IN DIODE, 30A Max Pulsed Drain Current, and 0.023 ohm Max Drain-Source On Resistance. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
IRF640
Thomson Consumer Electronics
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; JESD-609 Code: e0; Maximum Drain Current (Abs) (ID): 18 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTD3055L104T4G
NTD3055L104T4G by Onsemi is a power FET with 60V DS breakdown voltage, 45A IDM, and 0.104 ohm RDS(on). It is an N-channel transistor for switching applications. Operating in enhancement mode, it has a max power dissipation of 48W and can handle up to 175°C temperature.
NTD3055L104-1G
NTD3055L104-1G by Onsemi is a power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max pulsed drain current of 45A.
NTD3055L104G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; JESD-30 Code: R-PSSO-G2; Terminal Form: GULL WING;
NTD3055L170T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Peak Reflow Temperature (C): 260; Operating Mode: ENHANCEMENT MODE;
NTD3055L104T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 12 A;
NTD3055L104
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Qualification: Not Qualified; JESD-609 Code: e0;
NTD3055L104-001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Peak Reflow Temperature (C): 235; Maximum Drain-Source On Resistance: .104 ohm;
NTD3055-150T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Minimum DS Breakdown Voltage: 60 V; Maximum Turn Off Time (toff): 75 ns;
NTD3055L104-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Terminal Finish: TIN LEAD; Minimum DS Breakdown Voltage: 60 V;
NTD3055-094G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; No. of Elements: 1; Case Connection: DRAIN;
NTD3055-150-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28.8 W; Maximum Turn Off Time (toff): 75 ns; Package Body Material: PLASTIC/EPOXY;
NTD3055-150-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
NTD3055-150G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PSSO-G2;
NTD3055-094-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Transistor Element Material: SILICON; Terminal Form: THROUGH-HOLE;
NTD3055-094T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Operating Mode: ENHANCEMENT MODE; JESD-609 Code: e0;
NTD3055-150T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
NTD3055-150T4H
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28.8 W; Maximum Time At Peak Reflow Temperature (s): 30; No. of Terminals: 2;
NTD3055-094
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 175 Cel;
NTD3055-094-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1.5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved