Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MMT08B350T3 is a silicon surge protector with a non-repetitive peak on-state current of 32A. It features a max DC off-state voltage of 300V and operates b/w -40 °C to 125°C. Ideal for protecting electronic devices from power surges in various applications.
Median Price
$0.430
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.405
1k+ parts
$0.366
10k+ parts
-
Digiode
$0.390
Chip Stock
Vyrian
Corphita
$0.369
Corohmni
$0.410
Metaverse IC Inc.
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
UHIMA Technologies
Plastic/Epoxy material provides good insulation and protection against environmental factors, ensuring the longevity and reliability of the surge protector.
Single configuration simplifies installation and maintenance, making it a user-friendly choice for surge protection.
High on-state current capacity allows the surge protector to handle large surges effectively, offering reliable protection for connected devices.
Surface mount capability enables easy integration onto circuit boards, saving space and facilitating efficient assembly.
Rectangular shape provides a compact design for the surge protector, making it suitable for applications where space is limited.
C bend terminals ensure secure connections and conductivity, reducing the risk of loose connections and enhancing the overall performance of the surge protector.
High DC off-state voltage rating provides robust protection against transient voltage spikes, safeguarding connected equipment from potential damage.
High operating temperature range ensures the surge protector can function effectively in various environmental conditions, enhancing its versatility and reliability.
Thyristor surge protector offers fast response time and high surge handling capacity, effectively limiting the damaging effects of transient overvoltages on sensitive equipment.
Low operating temperature range allows the surge protector to function reliably in cold environments, making it suitable for a wide range of applications.
Tin lead terminal finish provides good conductivity and solderability, ensuring robust connections and reliable performance of the surge protector.
High breakdown voltage rating offers reliable overvoltage protection, preventing electrical breakdown and ensuring the safety of connected devices.
High peak reflow temperature tolerance allows the surge protector to withstand the heat generated during the soldering process, ensuring proper assembly and functionality.
UL recognized certification signifies that the surge protector meets stringent safety and performance standards, giving users confidence in its quality and reliability.
Silicon Surge Protectors MMT08B350T3 attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
MMT08B350T3 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Silicon Standard
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Bytesonic Electronics
NP1500SET3G
NP1500SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 180V. Ideal for protecting electronic devices from power surges in various applications.
TISP4250M3BJR
Texas Instruments
TISP4250M3BJR by Texas Instruments is a single silicon surge protector with 32A non-repetitive peak on-state current. It has a max DC off-state voltage of 190V and trigger device type as thyristor. Ideal for protecting electronic devices from power surges in various applications.
TISP7250H3SL
TISP7250H3SL by Texas Instruments is a silicon surge protector with 60A non-repetitive peak on-state current. It features a delta connected configuration, 3 elements, and 250V max breakdown voltage. Ideal for protecting electronic devices from power surges in various applications.
NP0720SBT3G
NP0720SBT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 88V, and trigger device type as thyristor. It operates b/w -40 to 150 °C and is surface mountable. Ideal for UL recognized applications requiring protection against surges.
TISP7180
TISP7180 by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 180V and can handle non-repetitive peak on-state current of 15A. Ideal for applications requiring protection against electrical surges, it features a rectangular package shape with through-hole terminals.
NP1100SCT3G
NP1100SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 130V, and trigger device type as thyristor. It operates b/w -40 to 150 °C and is ideal for UL recognized applications requiring protection against surges.
TISP4125M3LMR
TISP4125M3LMR by Texas Instruments is a single thyristor surge protector with 32A peak current, 125V breakdown voltage, and 150°C max operating temp. Ideal for protecting electronic devices from power surges in various applications.
TISP4125M3LPR
TISP4125M3LPR by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak current. Its cylindrical package contains a thyristor surge protector for applications requiring 125V max breakdown voltage protection.
TISP3150F3D
TISP3150F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 120V Max DC Off-state Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
FLC01-200B-TR
STMicroelectronics
FLC01-200B-TR by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a min breakdown voltage of 206 V, max operating temp of 150 °C, and built-in diode/resistor configuration. Ideal for protecting sensitive electronics from voltage spikes.
NP2300GBRLG
NP2300GBRLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max breakdown voltage of 260V and can handle up to 150000mA holding current. Ideal for applications requiring protection against surges in electronic circuits.
NP0640SAT3G
NP0640SAT3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 58V and trigger device type as thyristor. It has a max operating temperature of 150 °C, making it suitable for applications requiring protection against voltage surges. With UL recognition, this device is ideal for surface mount configurations in various electronic systems.
SMTPB68
SMTPB68 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a non-repetitive peak on-state current of 50 A and a max breakdown voltage of 90 V, making it ideal for protecting sensitive electronics. Its compact rectangular package ensures efficient space utilization in various applications.
TISP7180H3SL
TISP7180H3SL by Texas Instruments is a silicon surge protector with 60A non-repetitive peak on-state current. It features a thyristor surge protector configuration, 180V max breakdown voltage, and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TISP4180F3DR
TISP4180F3DR by Texas Instruments is a single silicon surge protector with 4A peak current. It has a max breakdown voltage of 180V and operates b/w 0-70°C. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4095H3BJ
TISP4095H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 75V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TISP4220H3BJR
TISP4220H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 220V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
SMTPA220
SMTPA220 by STMicroelectronics is a silicon surge protector with 16A non-repetitive peak on-state current and 220V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C.
TISP3115H3SL
TISP3115H3SL by Texas Instruments is a silicon surge protector with 60A peak current, 90V off-state voltage, and 115V breakdown voltage. It is used for surge protection in various applications due to its thyristor trigger device type and series-connected configuration.
LIC01-195I
STMicroelectronics' LIC01-195I is a single silicon surge protector with 195V breakdown voltage. It has 3 terminals, through-hole configuration, and plastic/epoxy package material. Ideal for protecting electronic devices from surges in applications requiring a max operating temperature of 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMT08B260T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Non Repetitive Peak On-state Current: 32 A;
MMT05B260T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
MMT05A310T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 365 V;
MMT08B064T3
MMT05B310T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e0;
MMT05B230T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
MMT08B260T3G
MMT05A230T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
MMT05B260T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Time At Peak Reflow Temperature (s): 30;
MMT05A310T3G
MMT05B350T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
MMT05B310T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
MMT05B064T3G
MMT08B064T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 58 V;
MMT05A260T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
MMT05B230T3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
MMT05A230T3
MMT05A260T3
MMT05B064T3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
MMT05B350T3
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved