Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC100ELT25DG by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating signals from ECL to TTL with a delay of 4.1 ns. Ideal for industrial applications requiring precise signal translation in compact spaces.
Median Price
$2.540
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Verical
$2.587
Rochester
$2.190
$1.960
$1.850
Digiode
$2.318
Vyrian
$2.440
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
ComSIT USA
QIE Inc.
LWI Electronics Inc
Bristol Electronics
Atlantic Semiconductor
Corphita
$2.196
Corohmni
Component Stockers USA
$2.490
$2.340
$2.120
Microchip USA
$28.795
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Perfect Parts
Problanco Electronics
UHIMA Technologies
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
GreenTree Electronics
Authorized Procurement Solutions
This material combination provides durability and protection for the voltage level translator.
Allows for compatibility with a wide range of devices that require voltage translation.
Ensures reliable performance even in high temperature environments.
Provides a strong and stable output signal for effective voltage level translation.
Provides a corrosion-resistant finish for the terminals, ensuring long-term reliability.
Voltage Level Translators MC100ELT25DG attributes and parameters. Explore more Voltage Level Translators devices from Onsemi
Maximum Delay:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Nominal Negative Supply Voltage:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Latch/Register:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MC100ELT25DG Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-654-0205, 5962016540205
NIIN
016540205
PCN Obsolescence/ EOL - Mult Dev EOL 23/Dec/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Fairchild Semiconductor
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
IP4853CX24
Nexperia
CMOS TO ECL TRANSLATOR; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 24; Package Code: VFBGA; Package Shape: SQUARE;
SN10KHT5542DW
Texas Instruments
SN10KHT5542DW by Texas Instruments is a voltage level translator with 8 functions, operating at supply voltages of 4.5V to 5.5V. It features TTL to ECL translation, with a max delay of 3.7ns and open-emitter output characteristics. Ideal for commercial extended temperature grade applications requiring inverted output polarity in a small outline package style.
P3A9606JK
VOLTAGE LEVEL TRANSLATOR;
MC14504BDTR2G
MC14504BDTR2G by Onsemi is a voltage level translator with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 3-18 V and max delay of 550 ns. Ideal for TTL/CMOS to CMOS translation in military-grade applications due to its compact size and low supply current.
MC10ELT24DG
MC10ELT24DG by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating TTL to ECL signals with a delay of 2 ns. Suitable for industrial applications, it has a compact rectangular package style ideal for surface mount designs.
MC100EPT23DTG
MC100EPT23DTG by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max delay of 1.8ns and interface type PECL to TTL. Ideal for industrial applications requiring precise signal translation in compact spaces.
SN10KHT5543DWRE4
SN10KHT5543DWRE4 by Texas Instruments is a voltage level translator with 8 functions, operating at supply voltages of 4.5V to 5.5V. It features an interface IC type of TTL to ECL Translator and has a max delay of 3.3ns. This device is ideal for applications requiring precise signal translation in commercial extended temperature environments.
SN65LVP16DRFRG4
SN65LVP16DRFRG4 by Texas Instruments is a voltage level translator with a max supply voltage of 3.6V and power supplies of 2.5/3.3V, suitable for industrial applications. It features PECL to LVDS translation, operates in temperatures ranging from -40 to 85°C, and has a compact square package style with dual terminals.
MC10H125MG
MC10H125MG by Onsemi is a voltage level translator with 4 functions, operating at 5.25V max and 4.75V min. It has a small outline package style, ECL technology, and translates ECL to TTL signals. Ideal for applications requiring precise signal translation in commercial extended temperature environments.
TCA39306DDFR
TCA39306DDFR by Texas Instruments is a voltage level translator with 2 bits, operating b/w -40 to 125°C. It has a supply voltage range of 0.85V to 5.5V and features open-drain output characteristics. Ideal for applications requiring small outline, thin profile packages in surface-mount designs with dual terminals.
SN10KHT5539DW
SN10KHT5539DW by Texas Instruments is a voltage level translator with 8 functions, operating at supply voltages b/w 4.5V to 5.5V. It features an ECL to TTL interface, open-collector output, and Gull Wing terminals. Ideal for commercial extended temperature grade applications requiring fast signal translation with a delay of 12.4ns in a compact small outline package measuring 15.4mm x 7.5mm x 2.65mm.
MC10EPT20DTR2
MC10EPT20DTR2 by Onsemi is a voltage translator with 3.3V supply, 0.45ns delay, and PECL interface. It operates in industrial temperatures from -40 to 85 °C, suitable for TTL/CMOS to PECL translation applications. The compact square package with gull wing terminals makes it ideal for space-constrained designs.
MC10H607FNG
MC10H607FNG by Onsemi is a voltage level translator with 6 functions, operating at 5V. It has a max supply voltage of 5.25V and min of 4.75V, suitable for PECL to TTL translation applications. The chip carrier package style measures 11.505mm in width and length, with a terminal pitch of 1.27mm for surface mount assembly at temperatures ranging from 0 to 85 °C.
DP8481F
DP8481F by Texas Instruments is a voltage level translator with 5-bit technology. It operates b/w -4.68V to 5.5V, suitable for TTL to ECL translation applications. With a package style of flatpack and terminal pitch of 1.27mm, it offers inverted output polarity and latch/register functionality.
10525/BEAJC
10525/BEAJC by Onsemi is a voltage level translator with 4 functions, MIL-STD-883 screening, and TOTEM-POLE output. It operates b/w -55 °C to 125°C, suitable for military-grade applications. The ECL TO TTL TRANSLATOR interface IC has a nominal voltage of 5V and -5.2V negative supply voltage, with a package style of IN-LINE.
MC10ELT24DR2G
MC10ELT24DR2G by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating TTL to ECL signals with a delay of 2 ns. Ideal for industrial applications requiring precise signal translation in compact spaces.
SN65LVDS18DRFR
SN65LVDS18DRFR by Texas Instruments is a voltage translator with 2.5/3.3V supplies, PECL to LVDS interface, and 0.63ns delay. Ideal for industrial applications, it operates b/w -40 to 85°C temperatures in a small outline package with dual terminals and no lead form factor.
MC100EPT21MNR4G
MC100EPT21MNR4G by Onsemi is a voltage level translator with a max supply voltage of 3.6V and min operating temperature of -40 °C. It features PECL to TTL translation, 2.25ns max delay, and is ideal for industrial applications requiring precise signal conversion in compact spaces.
PCA9517D
VOLTAGE LEVEL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100ELT24MNR4
MC100ELT24MNR4 by Onsemi is a voltage level translator with 8 terminals and ECL technology. It operates b/w -40 to 85 °C, translating TTL to ECL signals with a max delay of 2 ns. Ideal for industrial applications requiring precise signal translation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC100EPT25DG
ECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100ELT22DR2G
MC100ELT22DR2G by Onsemi is a voltage level translator with 2 functions, operating b/w -40 to 85 °C. It has a supply voltage range of 4.75-5.25 V and output polarity is complementary. Ideal for TTL/CMOS to PECL translation in industrial applications due to its small outline package and totem-pole output characteristics.
MC100EPT26DTG
MC100EPT26DTG by Onsemi is a voltage level translator with 3.3V power supply, 2.2ns max delay, and PECL to TTL interface. Ideal for industrial applications requiring ECL technology, it operates b/w -40 to 85°C with a peak reflow temperature of 260°C. The compact package features dual terminals in a small outline design for surface mount assembly.
MC100LVELT22DR2G
MC100LVELT22DR2G by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max supply voltage of 3.8V and operates in industrial temperature range (-40 to 85°C). Ideal for TTL/CMOS to PECL translation applications due to its ECL technology and small outline package style.
MC100LVELT23DTG
PECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MC10H124FNG
TTL TO ECL TRANSLATOR; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
MC100LVELT22DTG
MC100LVELT22DTG by Onsemi is a voltage level translator with a max supply voltage of 3.8V and a min supply voltage of 3V. It is commonly used as a TTL/CMOS to PECL translator in industrial applications.
MC100EPT21DR2G
MC100EPT21DR2G by Onsemi is a PECL to TTL translator with 3.3V supply, 2.25ns delay, and operates in industrial temperature range (-40 to 85 °C). It has dual terminals, matte tin finish, and small outline package suitable for voltage level translation applications.
MC100LVELT22DG
MC100LVELT22DG by Onsemi is a voltage level translator with 2 functions, operating at 3.3V. It has a max delay of 0.6ns and operates in industrial temperature grade range (-40 to 85 °C). Ideal for TTL/CMOS to PECL translation applications due to its ECL technology and small outline package style.
MC10H124PG
TTL TO ECL TRANSLATOR; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MC100ELT22DG
TTL/CMOS TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EP90DTG
ECL TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
MC100EPT24DG
LVTTL/LVCMOS TO LVECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100LVEL90DWG
ECL TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EPT21DTG
MC100EPT21DTG by Onsemi is a voltage level translator with a max supply voltage of 3.6V and a min operating temperature of -40°C. It is commonly used as a PECL to TTL translator in industrial applications.
MC100ELT23DG
PECL TO TTL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC10ELT21DG
MC100EPT622FAG
LVTTL/LVCMOS TO LVECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved