Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAC229A8FP by Onsemi is a 4 Quadrant Logic Level TRIAC with 600V Repetitive Peak Off-state Voltage. It has a Max RMS On-state Current of 8A and Max DC Gate Trigger Current of 20mA. Ideal for applications requiring precise AC switching in temperatures ranging from -40 to 110 °C.
Median Price
$19.500
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
American Microsemiconductor Inc.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Elcom Components
Pegasus Components GmbH
Resion
Corohmni
One Stop Electronics
$109.100
Kepictronics
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
TANS Electronics
Corphita
UHIMA Technologies
Provides good insulation and protection for the internal components, ensuring reliability and safety.
Allows for precise gate triggering to control the switching of the TRIAC effectively.
Simplifies the design and implementation of the TRIAC in various circuit applications.
Facilitates easy and secure connection to the circuit board or other components.
Ensures reliable operation even in high-temperature environments.
Suitable for handling high voltage applications with safety and efficiency.
Enhances the performance and reliability of the TRIAC by ensuring rapid response to voltage changes.
Maintains the TRIAC in the off-state to prevent unintended triggering, improving overall performance.
Triode For Alternating Current (TRIAC) MAC229A8FP attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Commutation Voltage:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
MAC229A8FP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
MAC15SD
MAC15SD by Onsemi is a single TRIAC with 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 to 110 °C, with a max DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in various electronic devices.
MAC4SN
MAC4SN by Onsemi is a single TRIAC with 3 terminals, capable of handling up to 4A RMS on-state current and 800V repetitive peak off-state voltage. It operates b/w -40 °C to 125°C, making it suitable for various applications requiring precise AC switching control in industrial settings.
BTA40-600B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
BTA26600B
Loras Industries
BTA26600B by Loras Industries is a TRIAC with 600V repetitive peak off-state voltage, 25A max RMS on-state current, and 1.5V max DC gate trigger voltage. It is ideal for AC power control applications due to its single configuration, through-hole terminal form, and isolated case connection.
BTA12-600CW3G
BTA12-600CW3G by Onsemi is a single TRIAC with 12A RMS on-state current, 600V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
BTA40-800B
Q6025NH6RP
Littelfuse
The Littelfuse Q6025NH6RP is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, making it suitable for various AC applications. With a max DC gate trigger current of 80mA, this device is ideal for controlling power in electronic circuits.
TIC253N
TIC253N by Texas Instruments is a TRIAC with 20A RMS current, 800V repetitive peak off-state voltage, and 2.5V max DC gate trigger voltage. It operates b/w -40°C to 125°C and is ideal for AC power control applications requiring precise switching capabilities.
BTA25H-800CW3G
BTA25H-800CW3G by Onsemi is a single TRIAC with 25A RMS current, 800V repetitive peak off-state voltage, and 35mA DC gate trigger current. Ideal for applications requiring isolated case connection, such as motor control systems or lighting dimmers.
BTB16-800SWRG
STMicroelectronics
STMicroelectronics' BTB16-800SWRG is a single TRIAC with 16A max RMS on-state current, 800V repetitive peak off-state voltage, and 10mA max DC gate trigger current. Ideal for applications requiring precise AC power control in industrial equipment or home appliances.
TIC225M
TIC225M by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 2mA Leakage Current, and 110°C Operating Temperature. Ideal for AC power control applications due to its 8A RMS On-state Current, 600V Repetitive Peak Off-state Voltage, and fast commutation voltage rise rate of 5V/μs.
L4004D5RP
L4004D5RP by Littelfuse is a single TRIAC with 1.6V max on-state voltage and 5mA max DC gate trigger current. Ideal for applications requiring a 4A max RMS on-state current, such as in UL recognized circuits operating b/w -40°C to 110°C.
Z0405MF1AA2
Z0405MF1AA2 by STMicroelectronics is a TRIAC with 4A RMS current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control like dimmers, motor speed controllers, and heating regulators.
2N6075AG
2N6075AG by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 20mA max DC gate trigger current, suitable for 4-quadrant logic level TRIAC applications. Operating b/w -40°C to 110°C, it's ideal for AC power control in various electronic devices.
Z0103MUF
Z0103MUF by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with a max RMS On-state Current of 1A and Repetitive Peak Off-state Voltage of 600V. It operates b/w -40 to 125 °C and has a Max DC Gate Trigger Voltage of 1.3V. Ideal for applications requiring precise AC power control in various electronic devices.
MAC4DSNT4G
MAC4DSNT4G by Onsemi is a single TRIAC with 10mA DC gate trigger current and 4A RMS on-state current. It operates b/w -40 to 125 °C and has an off-state voltage of 800V, making it ideal for AC power control applications in various electronic devices.
TIC246A
TIC246A by Texas Instruments is a TRIAC with max. RMS On-state Current of 16A, DC Gate Trigger Voltage of 2.5V, and Operating Temp. range from -40 to 110°C. It is used as a trigger device in AC circuits for applications requiring precise current control and switching capabilities.
BT139B-600F,118
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA206X-800CT,127
Ween Semiconductors' BTA206X-800CT,127 is a TRIAC with 800V repetitive peak off-state voltage and 6A max RMS on-state current. It operates b/w -40°C to 150°C, with a max DC gate trigger voltage of 1.5V. Ideal for AC power control applications requiring precise switching capabilities.
2N5275
2N5275 by Texas Instruments is a TRIAC with 25A RMS on-state current, 600V repetitive peak off-state voltage, and 3.5V max DC gate trigger voltage. It operates b/w -40°C to 125°C and is ideal for AC power control applications requiring up to 150mA gate trigger current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAC228A8G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC210A10FP
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
MAC212A8FP
MAC212A8DG
MAC212A8
MAC218-10
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC212A8D
MAC218-6
MAC212A10
MAC210-8
MAC212A10FP
MAC212A6FP
MAC210A8FP
MAC212A8G
MAC218-4
MAC210A8
MAC218A10
MAC218-8
MAC210A8G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved