Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NYE08-10B6RL1G by Onsemi is a TRIAC with max DC gate trigger current of 10mA, max leakage current of 0.2mA, and max operating temp of 125 °C. Ideal for applications requiring a 600V repetitive peak off-state voltage, such as lighting controls and motor speed controls.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
TANS Electronics
Problanco Electronics
Kulean Microsystems
Corphita
SupplyDigital Components
Corohmni
UHIMA Technologies
The high maximum DC gate trigger current allows for reliable and consistent triggering of the TRIAC, ensuring smooth operation.
Low leakage current helps to minimize power loss and improve efficiency in the overall circuit.
With a high operating temperature range, this TRIAC can withstand demanding environmental conditions and maintain performance.
The 4 quadrant logic level TRIAC allows for versatile and precise control of the switching operation, making it suitable for a wide range of applications.
The low minimum operating temperature ensures that the TRIAC can function reliably even in extreme cold environments.
The high maximum RMS on-state current rating enables the TRIAC to handle moderate to high power loads with ease.
The low maximum DC gate trigger voltage ensures efficient switching with minimal power loss in the triggering circuit.
The high repetitive peak off-state voltage rating makes this TRIAC suitable for handling high voltage applications.
The high minimum critical rate of rise of off-state voltage ensures fast and reliable switching of the TRIAC, reducing the risk of voltage spikes.
The high maximum holding current ensures that the TRIAC maintains its on-state conduction even under varying load conditions, improving overall stability.
Triode For Alternating Current (TRIAC) NYE08-10B6RL1G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
NYE08-10B6RL1G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
LM358N
BTA225-600BT
NXP Semiconductors
BTA225-600BT by NXP Semiconductors is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 150°C, ideal for snubberless applications in AC power control systems. The device features a max DC gate trigger current of 50mA and a max leakage current of 5mA.
MAC8D
MAC8D by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 8A, and max. DC gate trigger voltage of 1.5V. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control systems.
Q6015L6
Littelfuse
Q6015L6 by Littelfuse is a TRIAC with 15A RMS on-state current, 600V repetitive peak off-state voltage, and 80mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
BT137S-600E
The NXP Semiconductors BT137S-600E is a single TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current, making it suitable for applications requiring precise AC power control in various electronic devices. The device operates b/w -40 to 125 °C and features gull wing terminals for easy surface mount installation.
MAC210A8G
MAC210A8G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 10A max RMS on-state current, and 2V max DC gate trigger voltage. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating controllers.
BT134W-600E,115
Ween Semiconductors
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT139-800E,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
T1210-800G-TR
New Jersey Semiconductor Products
SNUBBERLESS TRIAC; Surface Mount: YES; Terminal Finish: MATTE TIN; Maximum DC Gate Trigger Voltage: 1.3 V; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3;
TIC201D
TIC201D by Texas Instruments is a TRIAC with 2.5A RMS on-state current, 400V repetitive peak off-state voltage, and -40 to 110°C operating temperature range. Ideal for AC power control applications requiring precise triggering and low leakage current.
BT136S-600
BT136S-600 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It features a 35mA max DC gate trigger current, making it suitable for applications requiring precise AC power control in various electronic devices. This single configuration device operates b/w -40°C to 125°C temperature range.
CLA60MT1200NHB
IXYS Corporation
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 80 mA; Maximum DC Gate Trigger Voltage: 1.6 V; Maximum Leakage Current: 2 mA; Repetitive Peak Off-state Voltage: 1200 V;
L401E5
Teccor Electronics
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JEDEC-95 Code: TO-92;
MAC4DLM-1G
MAC4DLM-1G by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with max RMS On-state Current of 4A and Repetitive Peak Off-state Voltage of 600V. Ideal for AC applications, it has a DC Gate Trigger Current of 3mA and operates b/w -40 to 110 °C, making it suitable for various electronic devices.
TIC226M
DTA8F
DTA8F by Onsemi is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -30 °C to 125°C, suitable for AC power control applications like dimmers and motor speed controllers due to its 8A max RMS on-state current and 500V repetitive peak off-state voltage.
TIC226E
TIC226E by Texas Instruments is a TRIAC with 8A RMS on-state current, 2mA max leakage current, and 110°C max operating temp. Ideal for AC power control applications due to its 500V repetitive peak off-state voltage and -40°C min operating temp.
MAC4DSN
MAC4DSN by Onsemi is a TRIAC with max. RMS on-state current of 4A, DC gate trigger voltage of 1.3V, and repetitive peak off-state voltage of 800V. Ideal for AC power control applications due to its high operating temperature range (-40 to 125 °C) and low leakage current (0.01mA).
MAC218A6
MAC218A6 by Onsemi is a TRIAC with 2V max on-state voltage, 8A max RMS current, and 50mA max gate trigger current. It is used in AC applications for switching and control purposes due to its single configuration and through-hole terminal form.
MAC97A6
MAC97A6 by Onsemi is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.6A. Ideal for applications requiring a 4 quadrant logic level TRIAC like dimmer switches, motor speed control, and AC switching circuits due to its high operating temperature range (-40 °C to 110°C) and low leakage current (0.1mA).
T405Q-600B-TR
T405Q-600B-TR by STMicroelectronics is a 4-quadrant logic level TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It is designed for AC applications, featuring a surface-mount package style, operating temperature range from -40 to 125°C, and matte tin terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NYE08-10B6RLRFG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us; Maximum Holding Current: 25 mA; Repetitive Peak Off-state Voltage: 600 V; Maximum RMS On-state Current: .8 A;
NYE08-10B6RLRPG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Maximum Leakage Current: .2 mA; Maximum RMS On-state Current: .8 A; Minimum Operating Temperature: -40 Cel; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us;
NYE08-10B6ST1G
4 QUADRANT LOGIC LEVEL TRIAC; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
NYE08-10B6TG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 600 V; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us; Maximum Operating Temperature: 125 Cel; Maximum Holding Current: 25 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved