Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB11867RV-TLM-H by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16V, and max output current of 0.02A. Ideal for Brushless DC Motor control applications, it features a small outline package with low profile design and operates b/w -30 to 95°C temperature range.
Median Price
$0.972
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.864
1k+ parts
$0.717
10k+ parts
$0.639
DigiKey
$1.080
Digiode
$0.705
Nova Conductors
$0.895
Flip Electronics
Chip Stock
DigiKey Marketplace
$0.770
Vyrian
Semicontronic
$0.630
$0.614
$0.611
Ampacity Inc.
Corphita
$0.668
Corohmni
$0.742
Argo Parts USA
Continental Prestige Electronics
$0.877
Aztec Data Supply Inc.
$16.740
Advanced Electronics
$23.644
$21.516
$19.388
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Microchip USA
UHIMA Technologies
Problanco Electronics
Provides durability and protection for the integrated circuit, making it suitable for various environments and applications.
Ideal voltage level for efficient operation of the motion control IC, ensuring optimal performance.
Can withstand high temperatures, allowing the IC to operate reliably in challenging thermal conditions.
Capable of functioning in low temperature environments, expanding the range of applications where the IC can be used.
Provides sufficient current output to drive motion control systems effectively.
Motion Control ICs LB11867RV-TLM-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LB11867RV-TLM-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 19/Dec/2017 Mult Dev EOL 7/Apr/2021 Mult Dev EOL Retraction 15/Jun/2018
PCN Design/Specification - C50710 to C19400 27/Oct/2016 Material Chg 21/Jan/2016
PCN Assembly/Origin - LBYYY/LAYYY 17/Jul/2018
PCN Packaging - Mult Dev Carrier Tape Chg 2/Mar/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Plessey Semiconductors Discrete Components Div
Other Transistors;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TC647BEOA
Microchip TC647BEOA is a Motion Control IC with 8 terminals, operating voltage of 3.3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to small outline package and industrial temperature grade suitability. Features matte tin finish, gull wing terminals, and moisture sensitivity level of 3.
DRV8871DDARQ1
DRV8871DDARQ1 by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 6.8V to 45V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for brush DC motor control applications. With a max output current of 3.5A, this IC is designed for compact designs requiring high performance in harsh environments.
MAX22205ATU+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: LCC38,.2X.27,20;
DRV8256PPWPR
DRV8256PPWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 48V. It features a max output current of 5A, suitable for automotive applications requiring precise brush DC motor control. With a compact rectangular package design and dual terminal position, it operates in temperatures ranging from -40°C to 125°C.
STGIPN3H60AT
STGIPN3H60AT by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 12-17V. It features Zig-Zag terminal position, -40 to 125°C temperature range, and is ideal for AC motor control applications in automotive settings.
MTS62C19A-HS105
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33035DWR2
Onsemi
MC33035DWR2 by Onsemi is a Brushless DC Motor Controller IC with 24 terminals. It operates b/w -40 to 85°C, with Vsup ranging from 10V to 30V. Suitable for motion control applications, it features a small outline package and bipolar technology.
LB1909MC-BH
LB1909MC-BH by Onsemi is a Motion Control IC with 12V supply voltage, 10 terminals, and 35mA supply current. It operates b/w -30 to 85°C and has a peak reflow temperature of 260°C. Ideal for applications requiring precise motion control in compact designs.
STK681-332-E
STK681-332-E by Onsemi is a Motion Control IC with 5V nominal voltage, 12A max output current, and 19 terminals in FLANGE MOUNT package. Ideal for BRUSH DC MOTOR CONTROL applications due to its HYBRID technology and 4.75-5.25V operating range.
FSBB15CH60C
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 15 A; Terminal Position: DUAL;
MAX6650EUB-T
MAX6650EUB-T by Maxim Integrated is a Motion Control IC with 10 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3-5 V and output current of 0.1 A. Ideal for industrial applications requiring brushless DC motor control in a compact square package.
DRV8256PRGER
DRV8256PRGER by Texas Instruments is a Motion Control IC with 24V nominal voltage, 5A max output current, and 48V max supply voltage. It is ideal for automotive applications requiring precise control of brush DC motors in a compact chip carrier package.
DRV8703DQRHBRQ1
DRV8703DQRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125°C. It supports supply voltage range of 5.5V to 45V and is ideal for automotive applications due to its compact size (5x5mm) and robust construction in PLASTIC/EPOXY package.
DRV8436RGER
DRV8436RGER by Texas Instruments is a Motion Control IC with 24 V nominal voltage, suitable for automotive applications. It features a max output current of 0.01 A and operates in a temperature range from -40 to 125 °C. This IC is designed as a stepper motor controller with surface mount packaging and quad terminal position.
A3950SEUTR-T
Allegro MicroSystems
Allegro MicroSystems' A3950SEUTR-T is a Motion Control IC with 8-36V power supplies, 2.8A output current, and -20 to 85°C operating temperature range. Ideal for Brushless DC Motor control applications due to its compact square package and quad terminal position.
FSB50450TB
Fairchild Semiconductor's FSB50450TB is a Motion Control IC with 23 terminals, operating at 12-15V. It features a max output current of 3A and a nominal voltage of 13.5V. This AC Motor Controller has a compact MICROELECTRONIC ASSEMBLY package suitable for various motion control applications.
DRV8802PWPR
Texas Instruments' DRV8802PWPR is a motion control IC with 24V nominal voltage and 1.6A max output current. Ideal for brush DC motor control applications, it features a small outline package style, industrial temperature grade, and surface-mount capability.
DRV8834PWP
DRV8834PWP by Texas Instruments is a Motion Control IC with 24 terminals and a supply voltage range of 2.5V to 10.8V. It features a max output current of 2.2A, suitable for brush DC motor control applications. With a compact rectangular package style and dual terminal position, it operates in industrial temperature grades from -40°C to 85°C.
DRV8837DSGR
DRV8837DSGR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 1.8V to 7V. It offers a max output current of 1.8A, operates in industrial temperature grade (-40°C to 85°C), and is suitable for brush DC motor control applications due to its compact square package design and surface-mount capability.
FSB50250AS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Width (mm): 12 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB11600JV-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-TLM-E
LB11660FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4-15V, and output current up to 1.5A. Ideal for Brushless DC Motor control applications, it features a compact rectangular package with low profile design and operates b/w -30 to 90°C temperature range.
LB11851FA-BH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LB11696V-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11696V-W-AH
LB11696V-MPB-E
LB11696V-TRM-E
LB11867FV-TLM-H
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11651H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11620T-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-E
LB11651-E
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB11620T
LB11660FV
LB11610P
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-H
LB11600JV-MPB-E
LB11620GP
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
LB11620T-TLM-E
LB11867RV
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved