Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HGTG30N60A4D by Onsemi is an N-CHANNEL IGBT with a max collector-emitter voltage of 600V and a max collector current of 75A. It has a nominal turn-off time of 238ns and a turn-on time of 35ns, making it ideal for power control applications requiring fast switching speeds. The transistor comes in a rectangular package style with through-hole terminals, suitable for flange mount installations at temperatures up to 150°C.
Median Price
$6.685
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
$4.270
100+ parts
$4.010
1k+ parts
$3.630
10k+ parts
-
DigiKey
$9.100
EBV Elektronik
Digiode
$4.056
Nova Conductors
$5.075
TME
$5.200
$3.420
$3.060
Flip Electronics
Chip Stock
Cyclops Electronics Ltd
Vyrian
ComSIT Distribution GmbH
Pegasus Components GmbH
Cogito LLC
Aztec Data Supply Inc.
$0.683
Ampacity Inc.
Semicontronic
$3.539
$3.521
Corphita
$3.843
Corohmni
Andel Nordic
$4.434
$4.257
Netroflash
Continental Prestige Electronics
$4.973
AZTECH Wire
$12.676
Component Stockers USA
$99.990
Metaverse IC Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Microchip USA
A-Z Elektronik GmbH
Problanco Electronics
Kulean Microsystems
RC Electronics
$4.810
$4.390
$4.260
GreenTree Electronics
Argo Parts USA
Kepictronics
TANS Electronics
Supply Digital
Glotronic Ltd.
SupplyDigital Components
Alle Elektronik GmbH
Authorized Procurement Solutions
UHIMA Technologies
S.R.D Solutions
This material provides insulation and protection for the internal components of the IGBT, increasing its durability and reliability.
N-channel IGBTs typically have lower on-state voltage drop compared to P-channel IGBTs, resulting in higher efficiency and better performance.
The built-in diode allows for more efficient switching and reduces reverse recovery losses, making this IGBT ideal for power control applications.
Designed specifically for power control applications, this IGBT is suitable for high voltage and current requirements in various power electronics systems.
With a high maximum collector-emitter voltage rating, this IGBT can handle high voltage operations without risk of breakdown, ensuring reliability in demanding applications.
With a high maximum collector current rating, this IGBT can handle high current loads efficiently, making it suitable for power control applications with varying current requirements.
Insulated Gate Bipolar Transistors (IGBT) HGTG30N60A4D attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Onsemi
Additional Features:
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
HGTG30N60A4D Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Micro Commercial Components
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
National Semiconductor
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
New Jersey Semiconductor Products
MG75Q1BS11
Toshiba
Toshiba's MG75Q1BS11 is an N-CHANNEL IGBT for MOTOR CONTROL applications. It features a Max VCEsat of 2.7V, Max IC of 75A, and Max VCE of 1200V. With a rise time of 600ns and fall time of 1000ns, it offers efficient power dissipation up to 300W in a RECTANGULAR package style.
AFGHL75T65SQDT
AFGHL75T65SQDT by Onsemi is an N-CHANNEL IGBT with a max VCEsat of 2.1V and a max collector-emitter voltage of 650V. It is designed for power control applications, featuring a nominal turn-off time of 174ns and a max power dissipation of 375W. This single configuration transistor operates b/w -55 to 175 °C, making it suitable for various industrial uses.
AUIRG4BC30SSTRL
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 34 A; Moisture Sensitivity Level (MSL): 1;
SKM200GB12E4
Semikron International
SKM200GB12E4 by Semikron is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a max VCEsat of 2.05V, IC of 313A, and toff of 597ns. Ideal for POWER CONTROL applications, it operates b/w -40 to 175°C with a VCEmax of 1200V.
IRG4BC30SPBF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 34 A; No. of Elements: 1;
IKW30N60TXK
Infineon Technologies
IKW30N60TXK by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 60A. It has a nominal turn-off time of 382ns and a turn-on time of 50ns, making it ideal for power control applications. The transistor comes in a rectangular package with through-hole terminals and operates at temperatures up to 175°C.
STGB30M65DF2
STGB30M65DF2 by STMicroelectronics is an N-CHANNEL IGBT with 650V VCE, 60A IC, and 2V VCEsat. Ideal for POWER CONTROL applications due to its built-in diode, low turn-off time of 310ns, and high power dissipation of 258W. Suitable for surface mount with gull wing terminals in a small outline package.
2ED300C17SROHSBPSA1
N-Channel; Transistor Element Material: SILICON; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Moisture Sensitivity Level (MSL): 1;
FGH40N65UFDTU
FGH40N65UFDTU by Onsemi is an N-CHANNEL IGBT with 650V VCEsat, 80A IC, and 290W power dissipation. Ideal for power control applications, it features a built-in diode, 152ns turn-off time, and operates b/w -55 to 150°C.
VS-GT55LA120UX
Vishay Intertechnology
VS-GT55LA120UX by Vishay Intertechnology is an N-CHANNEL IGBT with 1200V max collector-emitter voltage and 68A max collector current. Ideal for power control applications, it features a built-in diode, 260ns turn off time, and 291W max power dissipation.
IRG4PC50FPBF
IRG4PC50FPBF by Infineon Technologies is an N-CHANNEL IGBT with 600V max collector-emitter voltage and 70A max collector current. It has a 190ns max fall time, making it suitable for high-power applications like motor drives and inverters. The package style is flange mount with through-hole terminals.
AUIRG4BC30USTRL
AUIRG4BC30USTRL by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 23A. It has a nominal turn-off time of 320ns, making it ideal for power control applications requiring fast switching speeds and high voltage handling capabilities. The package style is small outline with gull wing terminals, suitable for surface mount configurations in various electronic devices.
FS200R06KE3BOSA1
FS200R06KE3BOSA1 by Infineon is a N-CHANNEL IGBT with 6 elements in bridge configuration. It has a toff of 450 ns, ton of 210 ns, and can handle up to 200 A collector current. Ideal for high-power applications requiring fast switching such as motor drives and power supplies.
IRG4PSH71UDPBF
Infineon's IRG4PSH71UDPBF is an N-CHANNEL IGBT with 1200V max collector-emitter voltage and 99A max collector current. It features a built-in diode, 330ns fall time, and 810ns turn off time. Ideal for power control applications with a max power dissipation of 350W at up to 150°C operating temperature.
FGH40N60SFDTU
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 80 A; Case Connection: COLLECTOR;
CM600DY-24A
Mitsubishi Electric
Mitsubishi Electric's CM600DY-24A is a N-CHANNEL IGBT with 2 SERIES CONNECTED elements, each with a built-in diode. It has a max VCEsat of 3V and can handle up to 600A collector current. Ideal for power control applications requiring high power dissipation (3670W) and operating temperatures up to 150°C.
IRFS7434TRL7PP
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 245 W; Maximum Drain Current (ID): 240 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRG7PH42UD1PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 313 W; Maximum Collector Current (IC): 78 A; Package Shape: RECTANGULAR;
IXGT30N120B3D1
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 300 W; Maximum Collector Current (IC): 30 A; Package Body Material: PLASTIC/EPOXY;
HGTG11N120CND
HGTG11N120CND by Onsemi is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 1200V and a max collector current of 43A. It has a nominal turn-off time of 570ns and a turn-on time of 33ns, making it ideal for motor control applications. The package style is flange mount with through-hole terminals in a rectangular shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Intersil
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 43 A; Maximum Fall Time (tf): 400 ns;
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 11 A; JESD-30 Code: R-PSFM-T3; Terminal Form: THROUGH-HOLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 43 A; Maximum Rise Time (tr): 16 ns;
HGTG20N60A4D
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 70 A; Maximum Gate-Emitter Voltage: 20 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 70 A; Maximum Fall Time (tf): 73 ns;
HGTG20N60A4D by Onsemi is an N-CHANNEL IGBT with 600V VCE, 70A IC, and 28ns ton. Ideal for POWER CONTROL applications due to its SINGLE configuration with BUILT-IN DIODE. Operates at a max temperature of 150°C in a RECTANGULAR package style.
HGTG30N60A4D
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 463 W; Maximum Collector Current (IC): 75 A; Maximum Gate-Emitter Threshold Voltage: 7 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 463 W; Maximum Collector Current (IC): 75 A; Additional Features: LOW CONDUCTION LOSS;
HGTG20N60B3D
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 165 W; Maximum Collector Current (IC): 40 A; Maximum Fall Time (tf): 200 ns;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 40 A; Nominal Turn On Time (ton): 45 ns; Maximum Collector-Emitter Voltage: 600 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 165 W; Maximum Collector Current (IC): 40 A; No. of Terminals: 3;
HGTG10N120BND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 35 A; JESD-609 Code: e3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 35 A; Package Shape: RECTANGULAR; Maximum Collector-Emitter Voltage: 1200 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 35 A; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 35 A; Nominal Turn Off Time (toff): 190 ns; Terminal Position: SINGLE;
HGTG40N60B3
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 70 A; Terminal Position: SINGLE;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 70 A; Nominal Turn Off Time (toff): 385 ns; No. of Elements: 1;
HGTG30N60A4
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 75 A; Terminal Position: SINGLE; Maximum Collector-Emitter Voltage: 600 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved