Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDP2710-F085 by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage and 50A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.047 ohm On Resistance, and 260W Power Dissipation in a RECTANGULAR package.
Median Price
$2.001
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
$2.112
10k+ parts
$1.988
Rochester
$1.890
$1.690
$1.590
Nova Conductors
$1.767
Digiode
$1.995
Chip Stock
Vyrian
Flip Electronics
Aztec Data Supply Inc.
$1.448
Corohmni
$1.732
AZTECH Wire
$1.740
$1.670
$1.640
$1.600
Continental Prestige Electronics
Argo Parts USA
Netroflash
$1.679
$1.643
Ampacity Inc.
$1.780
Corphita
Microchip USA
$14.300
$14.210
$14.170
$14.120
Perfect Parts
Problanco Electronics
A-Z Elektronik GmbH
SupplyDigital Components
Kulean Microsystems
Authorized Procurement Solutions
Supply Digital
TANS Electronics
UHIMA Technologies
Provides good insulation and protection for the internal components, ensuring durability and longevity.
N-channel FETs typically have lower ON resistance and higher switching speeds compared to P-channel FETs, making them more efficient for many applications.
The built-in diode allows for easy reverse current protection, simplifying circuit design and improving reliability.
Designed specifically for switching applications, ensuring fast and efficient operation.
Can handle high voltage requirements, making it suitable for a variety of applications.
Compact and space-saving design for easy integration into circuit boards.
Easy to solder and secure in place on a PCB.
Enhancement mode FETs are normally off and require a voltage signal to turn on, providing better control over the switching process.
Can withstand high energy spikes during operation, increasing reliability in harsh conditions.
Capable of handling high current loads, suitable for power-hungry applications.
Simple and straightforward connection design for easy integration in a circuit.
High power dissipation capability ensures the FET can handle heavy loads without overheating.
Provides a secure mechanical connection and heat dissipation for the FET.
Reliable and high-performance technology for efficient switching and operation.
Can operate at high temperatures without performance degradation, suitable for industrial applications.
Silicon offers good efficiency and reliability for semiconductor devices.
Can handle moderate current loads, suitable for a wide range of applications.
Low ON resistance ensures minimal power loss and heat generation during operation.
Simplified circuit design and connection layout for ease of use.
Provides a convenient connection point for the drain terminal, facilitating easy installation and usage.
Power Field Effect Transistors (FET) FDP2710-F085 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FDP2710-F085 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Crimson Semiconductor
IRF7401TRPBF
Infineon Technologies
Infineon's IRF7401TRPBF is an N-channel FET with a 20V breakdown voltage and 8.7A max drain current. Ideal for switching applications, it features a built-in diode, 0.022 ohm on-resistance, and can handle up to 35A pulsed drain current in enhancement mode operation.
MSC035SMA170B
Microsemi
Power Field-Effect Transistors;
IRF640
Samsung
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Turn Off Time (toff): 140 ns; Transistor Application: SWITCHING;
BSS123
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (ID): .17 A; Operating Mode: ENHANCEMENT MODE;
NTD3055-094T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
IRFR9024PBF
Vishay Siliconix
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 2; JESD-30 Code: R-PSSO-G2; Minimum DS Breakdown Voltage: 60 V;
IRFS7530TRL7PP
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 375 W; No. of Elements: 1; JESD-609 Code: e3;
IRLML9303TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING;
FDB33N25TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 235 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 918 mJ;
SI4946BEY-T1-E3
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.7 W; Maximum Drain-Source On Resistance: .041 ohm; JESD-30 Code: R-PDSO-G8;
JANTX2N6796
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: WIRE; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
IRLML5203TRPBF
Infineon's IRLML5203TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 24A IDM, and 0.098 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it's ideal for power management in various electronic devices.
CSD18540Q5BT
Texas Instruments
CSD18540Q5BT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 400A IDM, and 0.0033 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it can handle temperatures from -55 to 175 °C.
FQT7N10LTF
FQT7N10LTF by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a Max IDM of 6.8A and EAS of 50mJ, suitable for SWITCHING applications. This SINGLE transistor in PLASTIC/EPOXY package operates in ENHANCEMENT MODE at up to 150°C, with 0.38 ohm RDS(on) and 2W Pdiss.
GA05JT12-263
Genesic Semiconductor
PSMN4R8-100BSEJ
NXP Semiconductors
PSMN4R8-100BSEJ by NXP is a single N-channel power FET with 120A max drain current and 405W max power dissipation. Ideal for applications requiring high-power handling in enhancement mode operation, such as automotive systems or industrial equipment.
IRFZ44NLPBF
IRFZ44NLPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 160A IDM, 150mJ EAS, and 0.0175 ohm RDS(on). Operating at up to 175°C, it has a power dissipation of 94W in an IN-LINE package.
IXTA96P085T
Littelfuse
The Littelfuse IXTA96P085T is a P-CHANNEL FET with 85V DS breakdown voltage and 96A max drain current. Ideal for switching applications, it features a built-in diode, 300A pulsed drain current, and 0.013 ohm max on resistance. Suitable for enhancement mode operation in high-power systems with an operating temperature range of -55 to 150°C.
IRF3205ZSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Drain Current (Abs) (ID): 110 A; No. of Terminals: 2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDP20N50F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Qualification: Not Qualified; Avalanche Energy Rating (EAS): 1110 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Terminal Form: THROUGH-HOLE; Avalanche Energy Rating (EAS): 1110 mJ;
FDP2532
FDP2532 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 79A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.016 ohm On Resistance, and 310W Power Dissipation in a RECTANGULAR package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3;
FDP20N50
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; JESD-609 Code: e3; Qualification: Not Qualified;
FDP24N40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 227 W; JESD-30 Code: R-PSFM-T3; JEDEC-95 Code: TO-220AB;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 227 W; Minimum DS Breakdown Voltage: 400 V; Package Style (Meter): FLANGE MOUNT;
FDP2710
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 260 W; Maximum Drain Current (Abs) (ID): 50 A; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 260 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 150 Cel;
FDP2710_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 260 W; JESD-609 Code: e3; No. of Elements: 1;
FDP2614
The Onsemi FDP2614 is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 62A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.027 ohm RDS(on), and 260W Power Dissipation in a RECTANGULAR package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 260 W; JESD-609 Code: e3; Package Style (Meter): FLANGE MOUNT;
FDP2D3N10C
FDP2D3N10C by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 888A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 1176mJ EAS rating, and 0.0023 ohm RDS(on).
FDP2552
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; JESD-609 Code: e3; JEDEC-95 Code: TO-220AB;
FDP20AN06A0
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 90 W; Maximum Drain Current (Abs) (ID): 45 A; Avalanche Energy Rating (EAS): 50 mJ;
FDP22N50N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312.5 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
FDP2572
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 135 W; JESD-30 Code: R-PSFM-T3; Qualification: Not Qualified;
FDP26N40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 265 W; Maximum Drain Current (Abs) (ID): 26 A; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312.5 W; JESD-609 Code: e3; Maximum Pulsed Drain Current (IDM): 88 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved