Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$0.501
Northwest PG Solutions
$0.551
$0.485
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Corphita
UHIMA Technologies
Corohmni
Other Function Telecom Interface ICs AX-SF10-ANT21-868 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Onsemi
Telecom IC Type:
AX-SF10-ANT21-868 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
International Semiconductor
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Space Power Electronics
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Philips Semiconductors
MAX-8Q-0
U-blox Ag
MAX-8Q-0 by U-blox Ag is an AEC-Q100 graded telecom IC with 18 terminals, operating b/w -40 to 85°C. With a nominal voltage of 3V, it is ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package style. The IC's DUAL terminal position and NO LEAD form make it suitable for telecom circuit designs needing high reliability in harsh environments.
ZED-F9P-00B
ZED-F9P-00B by U-blox Ag is a 54-terminal IC with AEC-Q100 screening, operating from -40 to 85°C. It features a 3V supply voltage, telecom circuit type, and compact rectangular package. Ideal for telecom interfaces in industrial applications due to its small size and wide temperature range.
WL1801MODGBMOCT
Texas Instruments
WL1801MODGBMOCT by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates at -20 to 70°C, with a supply voltage of 3.7V and data rate of 100 Mbps. Ideal for telecom circuits, it has a compact rectangular shape and surface-mount capability.
NRF51822-QFAC-R
Nordic Semiconductor Asa
NRF51822-QFAC-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and thin profile design.
CC2564CRVMR
CC2564CRVMR by Texas Instruments is a telecom IC with 76 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a data rate of 4 Mbps and nominal voltage of 3.6V. Ideal for telecom circuits, it has a very thin profile and matte tin terminal finish.
JN5168-001-M06Z
NXP Semiconductors
TELECOM CIRCUIT; Peak Reflow Temperature (C): 240; Moisture Sensitivity Level (MSL): 3;
ADTR1107ACCZ
ADTR1107ACCZ by Analog Devices is a 24-terminal telecom IC with a nominal voltage of 5V. It operates in industrial temperature range (-40 to 85°C) and features a grid array package style. Suitable for telecom circuit applications, it has a thin profile and bottom terminal position.
WT32I-A-AI61-APTX
Silicon Labs
Other Telecom ICs;
RN4871-V/RM140
Microchip Technology
RN4871-V/RM140 by Microchip Technology is a surface mount telecom IC with 16 terminals. It operates at temperatures ranging from -20 to 70 °C and has a data rate of 0.01 Mbps. It is commonly used in telecom circuits for various applications.
MFRC63102HN,151
The NXP Semiconductors MFRC63102HN,151 is a telecom interface IC with 32 terminals in a square chip carrier package. Operating temperature range from -25 to 85 °C, with data rate of 0.4 Mbps. Ideal for telecom circuits requiring a nominal voltage of 5V and surface mount compatibility.
XCC3135MODRNMMOBR
XCC3135MODRNMMOBR by Texas Instruments is a telecom IC with 63 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for industrial applications requiring telecom circuit interfaces.
CC1175RHBR
CC1175RHBR by Texas Instruments is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 2.5/3.3V and data rate of 0.2 Mbps, suitable for industrial applications requiring a compact chip carrier package with surface mount capability.
SA612AN,112
SA612AN,112 by NXP Semiconductors is an 8-terminal telecom interface IC with a rectangular package style. It operates b/w -40 to 85°C and has a nominal voltage of 6V. Ideal for industrial applications requiring reliable telecom circuitry in compact designs.
WL1835MODGBMOCT
Texas Instruments' WL1835MODGBMOCT is a telecom IC with 100 terminals, operating at 3.7V and supporting data rates up to 100 Mbps. It features a rectangular package style, surface mount capability, and operates within -20 to 70°C temperature range. Ideal for telecom interface applications requiring high-speed data transmission in commercial-grade environments.
NRF52840-CKAA-R7
NRF52840-CKAA-R7 by Nordic Semiconductor Asa is a 93-terminal GRID ARRAY IC with 2 Mbps data rate, operating from -40 to 85 °C. Ideal for TELECOM CIRCUIT applications due to its low profile and fine pitch design.
XB3-24Z8RM-J
Digi International
The Digi International XB3-24Z8RM-J is a surface mount telecom IC with 34 terminals. It operates in industrial temperature range (-40 to 85°C) and has a rectangular package style (13x19mm). Ideal for telecom circuits, this IC is designed for various applications requiring reliable communication interfaces.
BM71BLES1FC2-0B04AA
BM71BLES1FC2-0B04AA by Microchip is a telecom IC with 16 terminals, operating temperature range of -40 to 85°C, and data rate of 0.0086 Mbps. It is a surface-mount rectangular package suitable for industrial applications requiring a nominal voltage of 3V.
CC3235MODSM2MOBR
CC3235MODSM2MOBR by Texas Instruments is a telecom IC with 63 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and peak reflow temperature of 260°C. This rectangular package is ideal for industrial applications requiring reliable telecom circuit interfaces.
SJA1105TELY
The NXP SJA1105TELY is a telecom interface IC with 159 terminals in a grid array package. It operates b/w -40°C to 105°C, supporting data rates up to 100 Mbps. Designed for telecom circuits, it has a low profile and fine pitch, making it suitable for various applications.
453-00060R
Laird Technologies
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AX-SFEU-1-03-TX30
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: RECTANGULAR;
AX-SFEU-1-01-TB05
AX-SFAZ-API-1-01-TB05
TELECOM CIRCUIT; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
AX-SF10-MINI21-868
AX-SFAZ
AX-SFAZ-1-01-TB05
AX-SFAZ-1-01-TX30
AX-SFAZ-API
AX-SFAZ-API-1-01-TX30
AX-SFEU-API-1-01-TB05
AX-SFEU-API-1-01-TX30
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL GOLD PALLADIUM; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved