Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' TJF1051T/1J is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C. It features Gull Wing terminals, supports circuits for telecom applications, and has a nominal voltage of 5V. Ideal for automotive use due to its small outline package style and peak reflow temperature of 260°C.
Median Price
$1.532
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$2.200
100+ parts
$1.030
1k+ parts
$0.897
10k+ parts
-
Mouser Electronics
$2.250
$1.060
$0.915
$0.717
Element14
$72.690
$50.820
Arrow
$0.560
Rochester
$0.832
$0.690
$0.616
Verical
$0.863
$0.769
Digiode
$0.562
Nova Conductors
$0.867
Vyrian
Anansix
Ampacity Inc.
$0.457
Semicontronic
$0.446
$0.443
Corphita
$0.533
Argo Parts USA
$0.739
Netroflash
Continental Prestige Electronics
$1.090
$0.767
$0.551
Microchip USA
$3.993
Advanced Electronics
$7.960
$7.562
Corohmni
$8.002
Aztec Data Supply Inc.
$9.970
Lixinc
Authorized Procurement Solutions
UNI Independent Distributors
Robosynatics
Lucentia Tech
The use of plastic/epoxy material ensures durability and resistance to external elements, making this product suitable for various environments.
Being surface mountable allows for easy installation and integration into electronic devices.
With a high maximum operating temperature, this product can withstand heat without compromising performance.
The low minimum operating temperature ensures that this product can function reliably in extreme cold conditions.
The use of multiple finishes provides corrosion resistance and ensures good electrical conductivity for a longer product lifespan.
The compact width of this product allows for efficient use of space within electronic devices.
Designed for automotive applications, this product meets industry standards for performance and reliability in vehicular environments.
The 5V supply voltage is a common standard in electronics, ensuring compatibility with various devices and systems.
Network Interfaces TJF1051T/1J attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
TJF1051T/1J Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9131RNXI-TR
KSZ9131RNXI-TR by Microchip Technology is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature grade range from -40 to 85°C and has a supply voltage of 1.2V. This network interface chip carrier is surface mountable and features a quad terminal position, making it suitable for various networking applications.
DP83848CVV
DP83848CVV by Texas Instruments is an Ethernet transceiver with 48 terminals in a square flatpack package. It operates b/w 0-70°C, with a supply voltage of 3.3V. Ideal for network interfaces, this CMOS technology chip is surface mountable and has a terminal pitch of 0.5mm.
LAN8742AI-CZ-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD230QDRG4Q1
SN65HVD230QDRG4Q1 by Texas Instruments is an AEC-Q100 compliant interface circuit with a data rate of 1 Mbps. Operating at 3.3V, it features a BICMOS technology and is suitable for automotive applications due to its wide temperature range (-40 to 125 °C) and small outline package style.
KSZ8463FRLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
TCAN1051HVDR
TCAN1051HVDR by Texas Instruments is a Network Interface with 8 terminals, operating from -55 to 125°C. It has a data rate of 2 Mbps and supports a supply voltage of 5V. Ideal for military-grade telecom applications due to its small outline package and dual terminal position.
TJA1040T/VM,118
NXP Semiconductors
NXP Semiconductors' TJA1040T/VM,118 is a CMOS network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in telecom applications. The small outline package with gull wing terminals is surface mountable, making it ideal for compact designs.
KSZ8061RNBW
Microchip Technology's KSZ8061RNBW is an Ethernet transceiver IC with a data rate of 100 Mbps. It operates in industrial temperature range (-40 to 105°C) and has a supply voltage of 1.2V. The chip carrier package style with matte tin finish and quad terminal position makes it suitable for automotive applications meeting AEC-Q100 standards.
RTL8211FS-CG
Realtek Semiconductor
RTL8211FS-CG by Realtek is a 48-terminal Ethernet transceiver with 1000 Mbps data rate. It operates b/w 0-70°C, in a square chip carrier package style. Ideal for network interfaces, it's surface-mountable and has a low profile of 1mm.
KSZ8091MNXIA-TR
Microchip Technology's KSZ8091MNXIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square surface mount package style, matte tin finish, and 3.3V supply voltage. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
KSZ9031RNXIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
MCP2551T-I/SNVAO
MCP2551T-I/SNVAO by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for automotive applications due to AEC-Q100 screening and -40 to 85°C operating temperature range. Small outline package with gull wing terminals for space-constrained designs.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
PCA82C250TD-T
PCA82C250TD-T by NXP Semiconductors is an 8-terminal interface circuit with a supply voltage of 5V. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for automotive network interfaces. The package is small outline, surface-mountable, and has a terminal finish of nickel palladium gold.
SN65HVD230DRG4
SN65HVD230DRG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate and 3.3V nominal voltage. It operates in industrial temperature range (-40 to 85°C) and has a small outline package suitable for network interfaces applications. With surface mount capability, it features dual terminals with Ni/Pd/Au finish.
14450R-500
Adesto Technologies
Network Interfaces;
PM8800A
STMicroelectronics
PM8800A by STMicroelectronics is a network interface IC with 16 terminals, operating b/w -40 to 85°C. It features a small outline package style and supports circuits in telecom applications. With a supply voltage of 1.8V, it has a terminal pitch of 0.65mm and peak reflow temperature of 260°C.
LAN8710AI-EZC-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8081RNBCA-G3XX
Microchip Technology's KSZ8081RNBCA-G3XX is a Network Interface with 32 terminals in a square chip carrier package. Operating at 0-70°C, it supports 100 Mbps data rate with 3.3V supply voltage for Ethernet transceiver applications. TS 16949 screening ensures high quality for commercial-grade telecom ICs.
LTC2875HDD#PBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJF1051T/3,118
NXP Semiconductors' TJF1051T/3,118 is a network interface with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and supports circuits for telecom applications. With a small outline package style and industrial temperature grade, it is suitable for various electronic devices requiring reliable network connectivity.
TJF1051T/3,112
NXP Semiconductors' TJF1051T/3,112 is a Network Interface with 8 terminals and 5V power supply. It operates at data rate of 1 Mbps, suitable for industrial telecom applications due to its small outline package and dual terminal position.
TJF1052IT/5Y
ETHERNET TRANSCEIVER; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
TJF1051T/3/1J
SUPPORT CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TJF1052IT/2Y
TJF1052IT/2Y by NXP Semiconductors is an Ethernet transceiver with 16 terminals and a small outline package style. It operates in industrial temperature range (-40 to 105 °C) and has a nominal voltage of 5V. This network interface IC is suitable for telecom applications.
TJF1051T/3
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TJF1051T/3/CM,118
TJF1051T/3/1U
TJF1051T/3/1U by NXP Semiconductors is a network interface with 8 terminals, small outline package style, and temperature grade suitable for automotive applications. It supports circuit in telecom ICs and operates at a voltage of 5V.
TJF1441AT/0Z
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Transceivers: 1;
TJF1051T
SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TJF1051T/CMJ
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TJF1052IT
INTERFACE CIRCUIT;
TJF1052IT/1
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TJF1052IT/2
TJF1052IT/5
TJF1441AT
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Current: 125 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved