Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DP83849IVS/NOPB by Texas Instruments is an Ethernet transceiver with 2 transceivers, data rate of 100000 Mbps, and operates at a supply voltage of 3.3V. It is used in network interfaces for industrial applications due to its CMOS technology and operating temperature range from -40°C to 85°C.
Median Price
$11.738
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$8.697
100+ parts
$7.597
1k+ parts
$5.239
10k+ parts
-
Mouser Electronics
$14.780
$10.820
$9.250
DigiKey
$15.090
$11.101
$9.500
$9.330
Chip1Stop
$8.164
Nova Conductors
$7.467
Digiode
$8.262
Maritex
$10.083
$6.293
$5.110
Chip Stock
Vyrian
Cyclops Electronics Ltd
Anansix
TME
$9.640
Ampacity Inc.
$6.940
Semicontronic
$6.766
$6.732
Aranea Global
$7.318
$7.025
Continental Prestige Electronics
Corphita
$7.827
Parana Technologies
$11.801
$12.203
Corohmni
$11.990
DigiPath Technology Company
$12.995
IDEA Electronic Components Group
$13.260
$12.597
$11.934
ChromeModa Solutions
$10.873
Advanced Electronics
$14.402
$13.682
Microchip USA
$34.160
Authorized Procurement Solutions
Lixinc
A-Z Elektronik GmbH
Perfect Parts
Alle Elektronik GmbH
Glotronic Ltd.
Kepictronics
Argo Parts USA
Futuretech Components
The use of plastic/epoxy material makes the product lightweight and durable, making it ideal for portable devices.
The surface mount feature allows for easy and efficient installation on PCBs, saving time and effort.
The 3.3V power supply ensures compatibility with a wide range of devices and systems.
Having 80 terminals allows for versatile connectivity options and enhances the product's functionality.
The high maximum operating temperature of 85°C ensures reliable performance even under harsh environmental conditions.
The low minimum operating temperature of -40°C makes the product suitable for use in extreme cold environments.
With a high data rate of 100,000 Mbps, this product provides fast and efficient data transfer for seamless connectivity.
Network Interfaces DP83849IVS/NOPB attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
DP83849IVS/NOPB Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Protek Devices
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
1554216004
Molex
WIRE AND CABLE;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
First Components International
Sangdest Microelectronics (Nanjing)
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taitron Components
SPC TECHNOLOGY/ MULTICOMP
SN65HVD231DG4
SN65HVD231DG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, operating at 3.3V. It has 8 terminals in a small outline package suitable for industrial temperature range applications. The device features gull wing terminal form and nickel/palladium/gold finish, making it ideal for network interfaces requiring low supply current.
PDP83825IRMQR
PDP83825IRMQR by Texas Instruments is an Ethernet transceiver with 24 terminals in a square chip carrier package. Operating temperature range from -40 to 85 °C, suitable for industrial applications. Nominal voltage of 3.3 V, ideal for network interfaces requiring surface mount technology.
KSZ8721BL-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
TJA1050T/N,118
NXP Semiconductors
NXP Semiconductors' TJA1050T/N,118 is a CMOS interface circuit with 1 Mbps data rate and 5V nominal voltage. It is designed for automotive applications, featuring a small outline package with 8 terminals and operating temperatures ranging from -40 to 125°C.
ISO1042QDWRQ1
ISO1042QDWRQ1 by Texas Instruments is an AEC-Q100 compliant network interface with 16 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. The IC has a nominal voltage of 1.8V and features gull wing terminals with nickel palladium gold finish.
AR8033-AL1B-R
Qualcomm
Qualcomm's AR8033-AL1B-R is an Ethernet transceiver with 1000 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package with 48 terminals and a low supply current of 113.7 mA. Ideal for industrial applications requiring high-speed network interfaces in compact form factors.
ISO1042DWR
ISO1042DWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, making it suitable for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
MAX14882AWE+
Maxim Integrated
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
DP83822IFRHBT
Texas Instruments DP83822IFRHBT is a Network Interface with 4 transceivers for Ethernet. It operates at data rate of 100000 Mbps, with supply voltage of 1.8V. Suitable for industrial applications, it has temperature range from -40 to 85°C and MSL level of 2.
TJA1042T/3
NXP Semiconductors' TJA1042T/3 is an AEC-Q100 compliant interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at a voltage of 5V, with a low supply current of 0.07mA. The package style is small outline, making it ideal for space-constrained designs.
KSZ8061RNDW-TR
Microchip Technology
Microchip Technology's KSZ8061RNDW-TR is an Ethernet transceiver IC with 100 Mbps data rate. It operates in industrial temperature range (-40 to 105°C) and has a supply voltage of 1.2V. This network interface chip comes in a square package, surface mountable, with AEC-Q100 screening for automotive applications.
IP101GRI
Ic Plus
IP101GRI by Ic Plus is a Network Interface chip with 32 terminals, CMOS technology, and Ethernet transceiver type. It operates in industrial temperature range (-40 to 85 °C) with a low profile (0.9 mm) square package suitable for surface mount applications.
TLE6250GV33XUMA1
Infineon Technologies
TLE6250GV33XUMA1 by Infineon Technologies is a CAN transceiver with 3.3V supply voltage, BICMOS technology, and 8 terminals in a small outline package. It is used for network interfaces in automotive applications due to its surface mount capability and gull wing terminal form.
TJA1021T/20
NXP Semiconductors' TJA1021T/20 is an automotive-grade interface circuit with 8 terminals, operating b/w -40 to 125°C. It features a nominal voltage of 12V and AEC-Q100 screening. This small outline package is designed for network interfaces in automotive applications.
KSZ8041TLI-S
KSZ8041TLI-S by Microchip Technology is a network interface with 48 terminals and a package shape of square. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 100 Mbps. This Ethernet transceiver is commonly used in industrial applications.
KSZ8081RNACA-TR
Microchip's KSZ8081RNACA-TR is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for network interfaces in commercial applications requiring a compact design and high-speed connectivity.
MAX13054AEASA+
CAN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
TJA1057GTKZ
INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
SN65HVD230MDREP
SN65HVD230MDREP by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, ideal for military-grade applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -55 to 125°C. This surface-mount device with gull wing terminals is designed for network interfaces requiring low supply current.
KSZ8841-16MVLI
ETHERNET TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: LFQFP; Package Shape: SQUARE; Package Style (Meter): FLATPACK, LOW PROFILE, FINE PITCH;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
DP83867IRPAPR
DP83867IRPAPR by Texas Instruments is an Ethernet transceiver with 8 transceivers, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a package style of flatpack with gull wing terminals. Ideal for network interfaces requiring high-speed connectivity in harsh environments.
DP83822IRHBR
DP83822IRHBR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting data rate of 100000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.8 V. Suitable for network interfaces, it comes in a square chip carrier package with 32 terminals and surface mount capability.
DP83848CVVX/NOPB
DP83848CVVX/NOPB by Texas Instruments is a 4-transceiver Ethernet IC with data rate of 100000 Mbps. It operates at 3.3 V, has quad terminals, and CMOS technology. Suitable for network interfaces, it comes in a square flatpack package with matte tin finish and can withstand temperatures from 0 to 70 °C.
DP83848IVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83848IVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with data rate of 100000 Mbps. It features a flatpack, low profile package style and operates in industrial temperature range (-40 to 85 °C). Ideal for network interfaces, it has 48 terminals and is surface mountable.
DP83867ERGZT
DP83867ERGZT by Texas Instruments is an Ethernet transceiver IC with a data rate of 1 Gbps. It operates in industrial temperature range (-40 to 105°C) and has a no-lead terminal form. The package style is chip carrier with 48 terminals, suitable for network interfaces applications.
DP83848CVV/NOPB
DP83848CVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a quad terminal position, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact flatpack design and fine pitch terminals.
DP83867IRRGZR
DP83867IRRGZR by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.1V. This network interface chip comes in a square package with 48 terminals, suitable for surface mount applications.
DP83867ERGZR
DP83867ERGZR by Texas Instruments is an Ethernet transceiver IC with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 105 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867ISRGZR
DP83867ISRGZR by Texas Instruments is an Ethernet transceiver with 1V supply voltage and 1000000 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867IRRGZT
DP83867IRRGZT by Texas Instruments is an Ethernet transceiver with 1.1V supply voltage, 1000000 Mbps data rate, and operates in industrial temperature range. It comes in a square chip carrier package with 48 terminals for surface mount applications. Ideal for high-speed network interfaces requiring reliable performance in harsh environments.
DP83867ISRGZT
DP83867ISRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a terminal pitch of 0.5mm. This network interface IC comes in a square chip carrier package suitable for surface mount applications.
DP83867IRPAPT
DP83867IRPAPT by Texas Instruments is a Network Interface with 4 transceivers, supporting data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a low supply current of 73mA. Ideal for Ethernet applications requiring high-speed connectivity in compact spaces.
DP83848IVVX
DP83848IVVX by Texas Instruments is an Ethernet transceiver with 48 terminals in a square package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features CMOS technology, GULL WING terminal form, and requires a nominal voltage of 3.3V.
DP83640TVV/NOPB
DP83640TVV/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at 3.3 V, has 48 terminals in a square package, and supports surface mount technology. Ideal for industrial applications requiring reliable network interfaces in a compact form factor.
DP83867CSRGZT
DP83867CSRGZT by Texas Instruments is an Ethernet transceiver with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates b/w 0-70°C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it features nickel palladium gold terminal finish and very thin profile design.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved