Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
AZTECH Wire
$20.020
Ampacity Inc.
$88.000
One Stop Electronics
$189.000
UNI Independent Distributors
Corphita
Northwest PG Solutions
Native Components
Cellphone ICs BGU7063,115 attributes and parameters. Explore more Cellphone ICs devices from NXP Semiconductors
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BGU7063,115 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM358AN
Littelfuse
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
ADL5363XCPZ-R7
Analog Devices
ADL5363XCPZ-R7 by Analog Devices is a cellphone IC with BICMOS technology. It operates b/w -40 to 85°C, has 20 terminals in a square package style, and requires a nominal voltage of 5V. This RF and baseband circuit is ideal for telecom applications due to its compact size and surface mount capability.
MAX2055EUP+T
Analog Devices' MAX2055EUP+T is a BICMOS technology-based Cellphone IC with 20 terminals in a small outline package. It operates b/w -40 to 85 °C, suitable for industrial telecom applications. The IC has a nominal voltage of 5V and peak reflow temperature of 260°C, making it ideal for baseband circuit integration.
CC1100-RTY1
CC1100-RTY1 by Texas Instruments is a cellphone IC with 20 terminals, operating at -40 to 85°C. It features a supply voltage of 3V, CMOS technology, and RF/baseband circuitry. This surface-mount chip carrier has a square shape, matte tin finish, and very thin profile for industrial applications.
ADRF5515ABCPZN
RF FRONT END CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3;
CC2510F16RSPR
CC2510F16RSPR by Texas Instruments is a cellphone IC with 36 terminals in a square package. It operates b/w -40 to 85°C, with a supply voltage of 2.5/3.3V and peak reflow temperature of 260°C. Ideal for RF and baseband circuits, this CMOS technology chip carrier is suitable for industrial applications requiring low-profile components.
LLCC68IMLTRT
Semtech
Semtech's LLCC68IMLTRT is a cellphone IC with 24 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, with matte tin finish and 3.3V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its compact size (4x4mm) and quad terminal position.
ADF4360-4BCPZRL
Analog Devices' ADF4360-4BCPZRL is a cellphone IC with 24 terminals, operating at 3.3V. It features BICMOS technology, quad terminal position, and matte tin finish. Ideal for baseband circuits in telecom applications, it has a compact square package with a very thin profile and can withstand industrial temperatures from -40 to 85°C.
LMH2121TMX/NOPB
LMH2121TMX/NOPB by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates b/w -40 to 85°C and has a max supply current of 4.7mA. This RF and baseband circuit is suitable for telecom applications due to its low power consumption and compact design.
CC1070RSQR
The Texas Instruments CC1070RSQR is a cellphone IC with 20 terminals in a square package. It operates at temperatures from -40 to 105°C, suitable for industrial use. This RF and baseband circuit has a supply voltage of 3V, making it ideal for telecom applications.
CC1101RGPR
CC1101RGPR by Texas Instruments is a cellphone IC with 20 terminals in a square chip carrier package. Operating at temperatures from -40 to 85°C, it has a supply voltage of 3V and data rate of 0.5 Mbps. Ideal for RF and baseband circuits, this IC is surface mountable and features a moisture sensitivity level of 3.
ADF4360-8BCPZRL
Analog Devices' ADF4360-8BCPZRL is a cellphone IC with 24 terminals, operating at 3.3V. It features BICMOS technology, matte tin finish, and quad terminal position. Ideal for baseband circuits in telecom applications, it has a compact square package with a very thin profile and can withstand industrial temperatures from -40 to 85 °C.
HMC687LP4TR
Analog Devices' HMC687LP4TR is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. Operating temperature range from -40 to 85 °C, suitable for RF and baseband circuits in telecom applications. Package style includes heat sink/slug, very thin profile, ideal for compact designs.
AFE7920IABJ
AFE7920IABJ by Texas Instruments is a Cellphone IC with 400 terminals in a square grid array package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a terminal pitch of 0.8mm and measures 17x17mm, making it ideal for cellphone applications.
AD6653BCPZ-125
AD6653BCPZ-125 by Analog Devices is a cellphone IC with 64 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, with a nominal voltage of 1.8V. Ideal for baseband circuits, it has a very thin profile and matte tin finish for industrial-grade telecom applications.
MAX5864ETM+
Analog Devices' MAX5864ETM+ is a cellphone IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a terminal pitch of 0.5mm, making it ideal for telecom applications.
TLV320AC57CN
TLV320AC57CN by Texas Instruments is a 20-terminal IC with 3V supply, operating b/w 0-70°C. It features A-LAW companding law, 13-bit linear coding, and a filter. Ideal for cellphone applications due to its BASEBAND CIRCUIT telecom IC type and compact IN-LINE package style.
CC2511F16RSPRG3
CC2511F16RSPRG3 by Texas Instruments is a cellphone IC with 36 terminals in a square package. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 3V. This RF and baseband circuit technology features a very thin profile, making it ideal for industrial telecom applications.
MAX2606EUT+T
MAX2606EUT+T by Analog Devices is a cellphone IC in small outline package with 6 terminals. Operating temp range -40 to 85°C, peak reflow temp 260°C. Telecom IC for baseband circuits with nominal voltage of 2.75V, ideal for industrial applications.
M95FA-03-STD
Quectel Wireless Solutions
M95FA-03-STD by Quectel Wireless Solutions is a cellphone IC with 42 terminals, operating temperature range of -40 to 85°C. It features RF and baseband circuit for telecom applications. This surface-mount IC has a rectangular package style, measuring 19.9mm in width and 23.6mm in length, making it suitable for compact electronic devices.
TLV321AC37IPT
TLV321AC37IPT by Texas Instruments is a Cellphone IC with 48 terminals in a square package. Operating temp range: -40 to 85°C, supply voltage: 3V. Ideal for telecom applications as baseband circuit due to low profile and fine pitch design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGU7258
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
BGU7063,518
BGU7061,518
BGU7078Y
RF AND BASEBAND CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGU7073Y
RF AND BASEBAND CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGU7063
BGU7258X
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; JESD-609 Code: e4;
BGU7060Y
BGU7073
BGU7062
BGU7078
BGU7075
BGU7062,518
BGU7224
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Width: 1.6 mm;
BGU7061,115
BGU7060
BGU7061
BGU7062,115
BGU7075Y
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved