Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' BFR31T/R is a N-CHANNEL FET with 25V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features DEPLETION MODE operation, GULL WING terminals, and 1.5pF Crss feedback capacitance. This SMALL OUTLINE transistor has a max power dissipation of 0.3W and operates up to 150°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Vyrian
Digiode
Nova Conductors
Ampacity Inc.
$7.050
AZTECH Wire
$12.613
One Stop Electronics
$54.050
UNI Independent Distributors
Corphita
Argo Parts USA
Continental Prestige Electronics
Aranea Global
This material is commonly used for small signal transistors due to its durability and ability to protect the internal components from environmental factors.
N-channel transistors are often preferred for amplifiers as they offer lower on-resistance and deliver better performance in audio applications.
A single configuration simplifies the design and circuit implementation, making it easier to integrate into amplifier circuits.
Designed specifically for amplifier applications, ensuring optimal performance and reliability in amplification tasks.
Surface mount technology enables easy and efficient PCB assembly, saving space and reducing overall production costs.
The high breakdown voltage allows for reliable operation and protection against voltage spikes in amplifier circuits.
With a maximum power dissipation of 0.3 W, this transistor can handle power efficiently while maintaining stable performance.
Capable of operating at high temperatures, making it suitable for applications where temperature variations are common.
Small Signal Field Effect Transistors (FET) BFR31T/R attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from NXP Semiconductors
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
BFR31T/R Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Eic Semiconductor
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Shenzhen Yixinsemi Electronics
FDC638P
FDC638P by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 4.5A, 0.048 ohm RDS(on), and operates in ENHANCEMENT MODE. With a small outline package style and GULL WING terminals, it can handle up to 1.6W power dissipation at temperatures ranging from -55°C to 150°C.
IRF7820TRPBF
Infineon Technologies
IRF7820TRPBF by Infineon is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It has 3.7A Drain Current, 0.078 ohm On Resistance, and operates at up to 150°C. This SMALL OUTLINE transistor in GULL WING package is designed for ENHANCEMENT MODE operation.
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LBSS84LT1G
Leshan Radio
LBSS84LT1G by Leshan Radio is a P-CHANNEL small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.13A and a max power dissipation of 0.225W.
2N7002-G
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Additional Features: HIGH INPUT IMPEDANCE; No. of Elements: 1; Terminal Finish: MATTE TIN;
2N7002W
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Feedback Capacitance (Crss): 7 pF; Terminal Finish: MATTE TIN;
2N7000
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain Current (ID): .3 A; JESD-30 Code: O-PBCY-W3; Terminal Position: BOTTOM;
2N7002BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .33 W; No. of Terminals: 3; JESD-30 Code: R-PDSO-G3;
MMBF170LT3
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; No. of Terminals: 3; Maximum Operating Temperature: 150 Cel;
BSS138BK
NXP Semiconductors
NXP Semiconductors' BSS138BK is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for SWITCHING applications. Featuring a built-in diode, it has a max ID of 0.36A and an on resistance of 1.6 ohm. This SMALL OUTLINE transistor operates in ENHANCEMENT MODE and is surface mountable with GULL WING terminals.
LND150N3-GP005
LND150N3-GP005 by Microchip is a N-CHANNEL FET with 0.03A ID and 1000Ω RDS(on). Ideal for switching applications, it operates in depletion mode with built-in diode. Featuring 3 terminals, cylindrical package style, and 1pF Crss, it is designed for efficient performance in various electronic circuits.
FDN304PZ_NL
Fairchild Semiconductor's FDN304PZ_NL is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2.4A Drain Current, 0.052 ohm On Resistance, and operates in ENHANCEMENT MODE. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals and can handle up to 150°C operating temperature.
2N7002PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Terminals: 6;
FDN337N-F169
Small Signal Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
NDS9407
NDS9407 by Onsemi is a P-CHANNEL FET with 60V DS breakdown voltage and 3A max drain current. Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating from -55 to 175°C, this MOSFET has 0.15 ohm max on resistance and matte tin terminal finish.
NTR1P02T1G
NTR1P02T1G by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, 0.18 ohm RDS(on), and 1A Drain Current. Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a SMALL OUTLINE package with GULL WING terminals. Operating up to 150°C, it's designed for high-performance electronic systems.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-226AA; Qualification: Not Qualified; Minimum DS Breakdown Voltage: 60 V;
BSS84PH6433
BSS84PH6433 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, 0.17A ID, and 8 ohm RDS(on). Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance.
NDS7002A_NL
Fairchild Semiconductor's NDS7002A_NL is a N-CHANNEL FET with 60V DS breakdown voltage, 0.28A ID, and 2 ohm RDS. Ideal for switching applications in enhancement mode, it operates b/w -65 to 150 °C with a max power dissipation of 0.3W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFR31
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Operating Mode: DEPLETION MODE; JESD-30 Code: R-PDSO-G3;
Allegro MicroSystems
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-609 Code: e0; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-226AA;
Philips Components
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Minimum DS Breakdown Voltage: 25 V; Operating Mode: DEPLETION MODE; Field Effect Transistor Technology: JUNCTION;
BFR31LT1
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Transistor Application: AMPLIFIER; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Minimum DS Breakdown Voltage: 25 V; No. of Terminals: 3;
BFR31LT1G
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 40;
BFR31,215
NXP Semiconductors' BFR31,215 is a N-CHANNEL FET with 25V DS Breakdown Voltage. Ideal for AMPLIFIER applications, it features DEPLETION MODE operation and GULL WING terminals. With a max power dissipation of 0.3W and operating temp up to 150°C, it's designed for small outline packages.
BFR30,215
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Transistor Application: AMPLIFIER; Field Effect Transistor Technology: JUNCTION;
BFR30LT1G
BFR30LT1G by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features DEPLETION MODE operation, GULL WING terminals, and 1.5pF Crss feedback capacitance. The transistor has a max power dissipation of 0.3W and can operate at temperatures up to 150°C.
BFR31L
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; No. of Elements: 1; Package Style (Meter): SMALL OUTLINE;
BFR31LT3
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Minimum DS Breakdown Voltage: 25 V; Terminal Finish: TIN LEAD; JEDEC-95 Code: TO-236AB;
BFR30LT3
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: JUNCTION; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
BFR30LT1
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
BFR30-TAPE-7
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; Terminal Position: DUAL;
BFR30T/R
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 40;
BFR30TRL
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Feedback Capacitance (Crss): 1.5 pF; Transistor Application: AMPLIFIER; Terminal Form: GULL WING;
BFR30TRL13
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: JUNCTION; No. of Terminals: 3;
BFR30
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Transistor Element Material: SILICON; JEDEC-95 Code: TO-236AB;
BFR30-T
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: JUNCTION; Terminal Position: DUAL;
BFR31TRL13
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Minimum DS Breakdown Voltage: 25 V; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved