Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Time At Peak Reflow Temperature (s): 30;
Median Price
$0.450
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
$0.167
1k+ parts
$0.117
10k+ parts
-
VNN
Anansix
Digiode
Vyrian
Nova Conductors
Prism Electronics
Advanced Electronics
$0.544
$0.517
Aztec Data Supply Inc.
$1.280
Corohmni
$1.310
Semicontronic
$10.050
$9.799
$9.748
AZTECH Wire
$15.370
$14.760
$14.470
$14.180
One Stop Electronics
$55.050
Ampacity Inc.
$56.050
Perfect Parts
Glotronic Ltd.
Supply Digital
Continental Prestige Electronics
Corphita
UNI Independent Distributors
Argo Parts USA
Bastille Electronics
Small Signal Field Effect Transistors (FET) BSH103T/R attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Nexperia
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
BSH103T/R Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Zetex Plc
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Bytesonic Electronics
Kec
BSS84AKW,115
NXP Semiconductors
NXP Semiconductors' BSS84AKW,115 is a P-CHANNEL FET with 50V DS Breakdown Voltage. Ideal for SWITCHING applications, it has a Drain Current of 0.15A and On Resistance of 8.5Ω. With a max operating temperature of 150°C, it comes in a PLASTIC/EPOXY package with GULL WING terminals.
IRF7820TRPBF
Infineon Technologies
IRF7820TRPBF by Infineon is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It has 3.7A Drain Current, 0.078 ohm On Resistance, and operates at up to 150°C. This SMALL OUTLINE transistor in GULL WING package is designed for ENHANCEMENT MODE operation.
FDS9435A_NL
Fairchild Semiconductor
FDS9435A_NL by Fairchild Semiconductor is a P-CHANNEL FET with 30V DS breakdown voltage. It is used for switching applications, has a max drain current of 5.3A, and operates in enhancement mode.
FDG6332C-F085
Onsemi
FDG6332C-F085 by Onsemi is a Small Signal FET with N/P-Channel, 2 elements w/ diode. It operates in enhancement mode for switching applications. Features include 20V DS breakdown voltage, 0.7A max drain current, and 0.3ohm on-resistance. Suitable for surface mount with Gull Wing terminals in a small outline package.
FDC5614P_NL
FDC5614P_NL by Fairchild Semiconductor is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 3A Drain Current, 0.105 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package style, it can handle up to 1.6W power dissipation at temperatures ranging from -55 to 150°C.
SI4447ADY-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI4447ADY-T1-GE3 is a P-channel FET with 40V breakdown voltage and 7.2A drain current. Ideal for switching applications, it features a built-in diode, 0.045 ohm on-resistance, and operates in enhancement mode at up to 150°C.
LND150N3-GP005
Microchip Technology
LND150N3-GP005 by Microchip is a N-CHANNEL FET with 0.03A ID and 1000Ω RDS(on). Ideal for switching applications, it operates in depletion mode with built-in diode. Featuring 3 terminals, cylindrical package style, and 1pF Crss, it is designed for efficient performance in various electronic circuits.
BSS123TA
Diodes Incorporated
BSS123TA by Diodes Inc. is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for SWITCHING applications. It features a max drain current of 0.17A and an operating temperature range from -55 to 150°C. The package style is small outline with gull wing terminals, making it suitable for surface mount configurations.
NDS0605
NDS0605 by Onsemi is a P-CHANNEL FET with 60V DS breakdown voltage and 0.18A drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a max power dissipation of 0.36W. The small outline package with gull wing terminals makes it suitable for surface mount designs.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BS170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Minimum DS Breakdown Voltage: 60 V;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
IRLML2803TRPBF-1
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .25 ohm; JEDEC-95 Code: TO-236AB; JESD-30 Code: R-PDSO-G3;
IRFL9110TRPBF
Vishay Intertechnology's IRFL9110TRPBF is a P-CHANNEL FET with 100V DS Breakdown Voltage and 1.1A Drain Current. Ideal for SWITCHING applications, it features a built-in diode, operates in ENHANCEMENT MODE, and has a max power dissipation of 3.1W.
ZXMN6A07FTA
ZXMN6A07FTA by Diodes Inc. is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.93A Drain Current, and 0.3 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with 150°C max temp.
MMBF170
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Terminal Form: GULL WING; Terminal Position: DUAL;
BSS84
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Drain Current (ID): .13 A; Package Shape: RECTANGULAR;
BSS138K
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 10 ohm; Transistor Application: SWITCHING; No. of Terminals: 3;
2N7002PW
2N7002PW by NXP Semiconductors is a N-CHANNEL FET with 60V DS breakdown voltage and 0.31A ID. It is used for SWITCHING applications in ENHANCEMENT MODE, featuring a max operating temperature of 150°C. The transistor has a built-in diode, GULL WING terminals, and operates in METAL-OXIDE SEMICONDUCTOR technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74LV1T08GW
Nexperia
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
BUK7S0R7-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
GAN041-650WSB
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn);
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
NCR321PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NXB0104BQ
BUS TRANSCEIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
PESD2ETH1G-T
PESD2ETH1G-T by Nexperia is a transient suppression device with common cathode configuration, 2 elements, and bidirectional polarity. It operates b/w -55 to 150 °C and has a max reverse voltage of 24 V. Ideal for protecting electronic circuits from voltage spikes in automotive and industrial applications.
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
PESD2CANFD24V-T
MJD32C
Power Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260;
PMEG050T150EIPD
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
PMH260UNE
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
BAS21TH
NCR420Z
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
BUK9K13-60RA
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
PMEG120G20ELR
PMEG120G10ELR
BSH103,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .5 ohm; Peak Reflow Temperature (C): 260; No. of Terminals: 3;
NXP Semiconductors BSH103,215 is a N-CHANNEL FET with 30V DS Breakdown Voltage. Ideal for SWITCHING applications, it features SINGLE configuration with built-in DIODE and 0.9A Drain Current. Operating in ENHANCEMENT MODE, it has 0.75W Power Dissipation and operates up to 150°C.
BSH103
BSH103 by NXP Semiconductors is a small signal FET with N-channel configuration and built-in diode, ideal for switching applications. It features a min DS breakdown voltage of 30V, max drain current of 0.85A, and operating temperature up to 150°C. The transistor's package is surface mountable with Gull Wing terminals in a rectangular shape.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 30 V; Terminal Finish: TIN; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSH114,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
NXP Semiconductors BSH114,215 is a N-CHANNEL FET with 100V DS Breakdown Voltage. Ideal for SWITCHING applications, it has 0.85A Drain Current and 0.5 ohm On Resistance. Operating at 150°C, it features GULL WING terminals in a SMALL OUTLINE package.
BSH103,235
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .75 W; JESD-30 Code: R-PDSO-G3; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Drain-Source On Resistance: .5 ohm; Terminal Position: DUAL;
BSH105,215
BSH105,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 1.05A and max power dissipation of 0.417W.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BSH103T/R
NXP Semiconductors' BSH103T/R is a N-CHANNEL FET with 30V DS Breakdown Voltage, 0.9A Drain Current, and 0.75W Power Dissipation. Ideal for SWITCHING applications in ENHANCEMENT MODE, this transistor features a RECTANGULAR package with GULL WING terminals and operates up to 150°C.
BSH111BKR
BSH111BKR by Nexperia is a small signal N-CHANNEL FET with a min DS breakdown voltage of 55V. It is used for switching applications and features a max drain current of 0.21A and a max drain-source on resistance of 4 ohm.
BSH108,215
NXP Semiconductors BSH108,215 is a N-CHANNEL FET with 30V DS breakdown voltage and 1.9A max drain current. Ideal for switching applications, it features a built-in diode, 0.14 ohm on resistance, and operates in enhancement mode at up to 150°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; JEDEC-95 Code: TO-236AB; Maximum Drain Current (ID): 1.9 A;
BSH111
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 55 V; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Terminal Form: GULL WING; Transistor Application: SWITCHING;
BSH111BK
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Transistor Application: SWITCHING; Maximum Time At Peak Reflow Temperature (s): 30;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 3; JEDEC-95 Code: TO-236AB; Peak Reflow Temperature (C): 260;
BSH111,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDSO-G3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved