Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDS4435BZ by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage and 8.8A Drain Current. Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation, 0.02 ohm On Resistance, and 345pF Feedback Capacitance.
Median Price
$0.490
Lifecycle Status
Suppliers In-Stock
53
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.548
100+ parts
$0.521
1k+ parts
10k+ parts
-
DigiKey
$1.160
$0.477
$0.334
Mouser Electronics
$1.230
$0.494
Newark
$1.250
$0.564
$0.510
Element14
$0.634
$0.432
Arrow
$0.221
RS (Exports)
$0.262
Chip1Stop
$0.323
$0.237
$0.207
Verical
$0.343
Master Electronics
$0.476
$0.305
$0.230
Rochester
$0.306
$0.254
$0.227
Digiode
$0.238
IBS Electronics
$0.243
$0.351
Nova Conductors
$0.318
DF Sales Co.
$0.320
Bristol Electronics
$0.563
$0.208
$0.146
TME
$1.090
$0.460
$0.311
$0.299
Maritex
$1.319
$0.345
$0.246
$0.194
Ozdisan Elektronik
$57.130
Chip Stock
NAC Semi
$0.304
Quantum Digital Technology
Cyclops Electronics Ltd
Vyrian
Dan-Mar Components
Prism Electronics
Sea View Technologies
R&J Components
ACDS - Activité Composants Distribution Service
Inventory MP
LWI Electronics Inc
Lantek
Microfarads
ComSIT Distribution GmbH
ComSIT USA
Flip Electronics
Semi Source
A&K Electronics
Rotakorn
LIBRA Elektronik GmbH
EMSNET
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Connector Distribution Corp
Right Parts Inc.
SPM Sales
A2Z Electronics, Inc.
Sensible Micro Corp
NPI Materials, Inc.
Elcom Components
South Electronics
Classic Components Corporation
LittleDiode
Ampacity Inc.
$0.174
Semicontronic
$0.170
$0.169
Corohmni
$0.224
Corphita
$0.226
Argo Parts USA
$0.308
Netroflash
$0.302
$0.296
Advanced Electronics
Aztec Data Supply Inc.
$1.675
Perfect Parts
Metaverse IC Inc.
Authorized Procurement Solutions
RC Electronics
$0.300
$0.290
Eastek
GreenTree Electronics
Futuretech Components
Robosynatics
$0.742
$0.727
Lucentia Tech
Lixinc
QUARKTWIN TECHNOLOGY LTD
CPlus Electronics
Infinite Electronics LLP (Excess)
Kulean Microsystems
TANS Electronics
Problanco Electronics
iodParts Technologies Inc.
SupplyDigital Components
Kepictronics
Supply Digital
Assy Fe
Formix International (Excess)
Cyclops Electronics Ltd (Excess)
UHIMA Technologies
Continental Prestige Electronics
$0.384
$0.248
$0.205
ChipstoGo Electronic ltd
Speed Components Ltd (Excess)
This material provides durability and allows for easy handling during the assembly process.
P-channel FETs are commonly used for high side switching applications, making this transistor suitable for various circuit designs.
The built-in diode simplifies circuit design and offers protection against back EMF, enhancing the reliability of the overall system.
Designed specifically for switching applications, this transistor provides fast response times and efficient operation.
Surface mount technology allows for easy and space-efficient integration onto PCBs, making this transistor suitable for compact designs.
With a minimum breakdown voltage of 30V, this transistor can handle higher voltages, providing a safety margin for various applications.
The high maximum drain current rating allows for handling of high current loads, making this transistor suitable for power applications.
Low on-resistance results in minimal power loss and improved efficiency in switching applications.
Small Signal Field Effect Transistors (FET) FDS4435BZ attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDS4435BZ Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
ROHM
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Telefunken Microelectronics
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDG6301N
Onsemi
The Onsemi FDG6301N is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It features a 25V DS Breakdown Voltage, 0.22A Drain Current, and 4 ohm On Resistance. With GULL WING terminals and SMALL OUTLINE package style, it operates in ENHANCEMENT MODE at up to 150°C.
2N7002W
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Minimum Operating Temperature: -55 Cel; Maximum Drain Current (ID): .34 A;
2N7002DW
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
FDC2512
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 150 V;
326
Nte Electronics
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: DEPLETION MODE; No. of Elements: 1; Field Effect Transistor Technology: JUNCTION;
SI1553CDL-T1-GE3
Vishay Intertechnology's SI1553CDL-T1-GE3 is a Small Signal FET with N/P-channel, 2 elements, and built-in diode. Ideal for switching applications, it operates in enhancement mode with max drain current of 0.7A and on-resistance of 0.39 ohm. With a temp range of -55 to 150°C, this MOSFET has a peak reflow temp of 260°C and feedback capacitance of 6pF.
2N7002KW_R1_00001
Panjit International
2N7002KW_R1_00001 by Panjit Int. is a N-CHANNEL FET with 60V DS breakdown voltage, 0.115A ID, and 3 ohm RDS(on). Ideal for switching applications due to its single configuration with built-in diode. Features GULL WING terminals in a SMALL OUTLINE package style.
NTR4503NT1G
NTR4503NT1G by Onsemi is a N-CHANNEL FET with 30V DS breakdown voltage, 1.5A max drain current, and 0.11 ohm max on resistance. Ideal for switching applications due to its single configuration with built-in diode. Operates in enhancement mode, surface mountable, and has a max operating temperature of 150°C.
BS170
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BSS138WH6327XTSA1
Infineon Technologies
Infineon BSS138WH6327XTSA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and operates in ENHANCEMENT MODE. With 0.5W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic devices.
NTJD5121NT1G
NTJD5121NT1G by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.295A max drain current, and 1.6 ohm max on resistance. Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C.
NDS332P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
FDMQ8205A
FDMQ8205A by Onsemi is a Small Signal FET with N/P-Channel, 1.7A max drain current, and 0.051 ohm on-resistance. Ideal for switching applications in enhancement mode, it features a complex configuration in a small outline package with no lead terminals.
LND150N3-GP014
LND150N3-GP014 by Microchip is a N-CHANNEL FET with 500V DS breakdown voltage, ideal for switching applications. Operating in depletion mode, it has a max ID of 0.03A and RDS(on) of 1000Ω. With a temp range of -55 to 150°C, it features METAL-OXIDE SEMICONDUCTOR tech and a built-in diode for efficient performance.
MMBF170LT3
MMBF170LT3 by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With 0.5A max drain current and 0.225W power dissipation, it offers reliable performance in small outline packages.
PMV65XPER
PMV65XPER by Nexperia is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 2.8A ID, 0.078 ohm RDS(on), and ENHANCEMENT MODE operation. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7000-D26Z
2N7000-D26Z by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage and 0.2A drain current. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.4W. The transistor features a built-in diode, cylindrical package style, and metal-oxide semiconductor technology.
BSS84
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Drain-Source On Resistance: 10 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDS4935BZ
FDS4935BZ by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, 6.9A Drain Current, and 0.022 ohm On Resistance. Ideal for SWITCHING applications, it features a RECTANGULAR package with GULL WING terminals and operates in ENHANCEMENT MODE at up to 150°C.
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: MATTE TIN; Transistor Element Material: SILICON;
FDS4685
FDS4685 by Onsemi is a P-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 8.2A and an Operating Temperature up to 150°C. With a small outline package style and surface mount capability, it offers high performance in compact designs.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Form: GULL WING; Maximum Operating Temperature: 150 Cel;
FDS4675_F085
FDS4675_F085 by Fairchild Semiconductor is a P-CHANNEL FET for SWITCHING applications. Features include 40V DS Breakdown Voltage, 11A Drain Current, and 0.013 ohm On Resistance. With ENHANCEMENT MODE operation, it has a max temp of 175°C and comes in an 8-terminal GULL WING package.
FDS4675-F085
FDS4675-F085 by Onsemi is a P-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features 11A Drain Current, 0.013 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package style, it offers high performance in a compact design.
FDS4435BZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 8;
FDS4672A
FDS4672A by Onsemi is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It has 11A Drain Current, 0.013 ohm On Resistance, and operates at max temp of 175°C. Package: PLASTIC/EPOXY, GULL WING terminals, SMALL OUTLINE style.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.2 W; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
FDS4435BZ_F085
FDS4435BZ_F085 by Fairchild Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8.8A Drain Current, 0.02 ohm On Resistance, and operates in ENHANCEMENT MODE. With a max power dissipation of 2.5W and operating temperature up to 150°C, it is suitable for various electronic designs requiring high-performance transistors.
FDS4435BZ-F085
FDS4435BZ-F085 by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage and 8.8A Drain Current, ideal for SWITCHING applications. It features a RECTANGULAR package shape, GULL WING terminals, and operates in ENHANCEMENT MODE at up to 150°C. With 0.02 ohm On Resistance and 345pF Feedback Capacitance, it offers efficient performance in various electronic circuits.
FDS4897C
FDS4897C by Onsemi is a Small Signal FET with N/P-Channel, 2 elements w/ diode. It operates in enhancement mode for switching applications, with max drain current of 6.2A and on-resistance of 0.029 ohm. This MOSFET has a breakdown voltage of 40V and can handle up to 2W power dissipation, suitable for surface mount designs at temperatures up to 150°C.
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 8;
FDS4435A
FDS4435A by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has 9A Drain Current, 0.017 ohm On Resistance, and can withstand temperatures from -55 to 150 °C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; No. of Elements: 1; JESD-609 Code: e3;
FDS4435
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; JESD-30 Code: R-PDSO-G8; Maximum Operating Temperature: 175 Cel;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Minimum DS Breakdown Voltage: 30 V; Terminal Position: DUAL;
FDS4435_NL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON;
FDS4435A_NL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Transistor Application: SWITCHING; JESD-30 Code: R-PDSO-G8;
FDS4435AL86Z
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON; JESD-30 Code: R-PDSO-G8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved