Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: VFBGA; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Prism Electronics
Parana Technologies
$7.371
$7.864
DigiPath Technology Company
$8.116
$7.467
ChromeModa Solutions
$8.282
$6.791
IDEA Electronic Components Group
$7.868
$7.454
AZTECH Wire
$16.429
One Stop Electronics
$105.000
Corphita
Cellphone ICs LMV226TL attributes and parameters. Explore more Cellphone ICs devices from National Semiconductor
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LMV226TL Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Alpha & Omega Semiconductor
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Bkc Semiconductors
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Sangdest Microelectronics (Nanjing)
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RYZ014A000FZ00#HD0
RF AND BASEBAND CIRCUIT; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3;
AFE8030IABJ
AFE8030IABJ by Texas Instruments is a Cellphone IC with 400 terminals in a square package. It operates b/w -40°C to 85°C, has a terminal pitch of 0.8mm, and features RF and baseband circuitry. Ideal for telecom applications requiring fine-pitch grid array packages.
ADRF6658BCPZ
Analog Devices
Analog Devices' ADRF6658BCPZ is a 48-terminal cellphone IC with a square package shape and matte tin terminal finish. Operating b/w -40 to 105 °C, it's ideal for RF and baseband circuits in telecom applications. With a compact size of 7x7mm and no-lead terminal form, it offers industrial-grade performance at 3.3V supply voltage.
SARA-R410M-02B-03
U-blox Ag
SARA-R410M-02B-03 by U-blox Ag is a surface mount Cellphone IC with 96 terminals. Telecom IC type includes RF and baseband circuit, operating at -20 to 65°C. Nominal voltage of 3.8V makes it ideal for commercial applications requiring compact design and high performance.
CC2420RTCR
The Texas Instruments CC2420RTCR is a cellphone IC with 48 terminals in a square package. It operates b/w -40 to 85°C, with a supply voltage of 1.8V and peak reflow temperature of 260°C. Ideal for RF and baseband circuits, it features CMOS technology and nickel palladium gold terminal finish.
CC1000PWR
CC1000PWR by Texas Instruments is a cellphone IC with 28 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 2.5/3.3V, RF and baseband circuitry, and CMOS technology. This small outline package is ideal for telecom applications requiring low power consumption and high reliability in industrial environments.
MAX2044ETP+T
Analog Devices' MAX2044ETP+T is a Cellphone IC with 20 terminals in a square package. It operates at -40 to 85 °C, with power supplies of 3.3/5V. Ideal for RF and baseband circuits, it features BICMOS technology and a terminal pitch of 0.65mm.
LT5575EUF#TRPBF
Analog Devices' LT5575EUF#TRPBF is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
HMC818LP4ETR
Analog Devices' HMC818LP4ETR is a 24-terminal cellphone IC in a square chip carrier package with very thin profile. It operates b/w -40 °C to 85°C, suitable for industrial telecom applications requiring RF and baseband circuits at 3V supply voltage.
ADF4360-9BCPZRL7
Analog Devices' ADF4360-9BCPZRL7 is a cellphone IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it comes in a square chip carrier package style with matte tin finish and very thin profile.
AFE8030EDIALK
AFE8030EDIALK by Texas Instruments is a Cellphone IC with 400 terminals in a square package. It operates b/w -40 to 85°C, with peak reflow temp of 220°C. This RF and baseband circuit is ideal for telecom applications due to its fine pitch grid array style and bottom terminal position.
SARA-R410M-02B
SARA-R410M-02B by U-blox Ag is a CELL IC with RECTANGULAR package, 96 terminals, and operates b/w -20 to 65 °C. It is used for RF and baseband circuits in telecom applications due to its 3.8V supply voltage and compact size of 16x26mm.
TRF4900
TRF4900 by Texas Instruments is a cellphone IC with 24 terminals in a small outline, thin profile package. It operates b/w -20°C to 60°C and has a supply voltage of 3V. This RF and baseband circuit is ideal for telecom applications due to its compact size and dual terminal position.
MAX2306ETI
Analog Devices' MAX2306ETI is a cellphone IC with 28 terminals, operating at -40 to 85 °C. It has a supply voltage of 3/3.3V and low current draw of 0.0415mA. Ideal for baseband circuits in telecom applications due to its compact square chip carrier package design.
ADS58C20IPFP
Texas Instruments ADS58C20IPFP is an 80-terminal cellphone IC with a max analog input of 3.45V, operating b/w -40 to 85°C. It features a flatpack package style, gull wing terminal form, and is suitable for RF and baseband circuit applications in the telecom industry.
MAX5864E/D
Analog Devices' MAX5864E/D is a cellphone IC with CMOS technology, operating from -40 to 85 °C. It features an unencased chip package, tin-lead terminal finish, and 3V supply voltage. Ideal for RF and baseband circuits in industrial-grade telecom applications.
CC2420
The Texas Instruments CC2420 is a cellphone IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has power supplies of 1.8V and 3.3V, making it ideal for telecom applications.
HMC421QS16ETR
Analog Devices' HMC421QS16ETR is a 16-terminal cellphone IC in small outline package with matte tin finish. It operates b/w -40 °C to 85°C, suitable for industrial telecom applications requiring RF and baseband circuits. With shrink pitch design, it has a compact size of 4.9mm x 3.9mm x 1.75mm for space-constrained designs.
RFFM6903
Qorvo
RFFM6903 by Qorvo is a cellphone IC with 28 terminals in a square grid array package. Operating temperature range from -40 to 85°C, suitable for industrial telecom applications. Features nickel palladium gold finish, butt terminal form, and nominal voltage of 3.6V.
AFE7989IABJ
AFE7989IABJ by Texas Instruments is a Cellphone IC with 400 terminals in a GRID ARRAY, FINE PITCH package. It operates b/w -40 to 85°C and features RF AND BASEBAND CIRCUIT for telecom applications. The package is made of PLASTIC/EPOXY, measures 17x17 mm, and has a terminal pitch of 0.8 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved