Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn);
Median Price
$2.150
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Farnell
1+ parts
$1.240
100+ parts
$0.895
1k+ parts
$0.787
10k+ parts
-
Newark
$1.230
$0.926
$0.858
Element14
$2.780
$1.700
$1.430
$1.400
Continental Prestige Electronics
$1.530
$0.995
$0.901
Microchip USA
$7.322
Triode For Alternating Current (TRIAC) QJ6004V4TP attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Littelfuse
JESD-609 Code:
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
QJ6004V4TP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Unitrode
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148WS
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
DTA1C
DTA1C by Onsemi is a TRIAC with 1A RMS current, 200V repetitive peak off-state voltage, and 125 °C max operating temp. Ideal for AC power control applications due to its low leakage current of 0.01mA, high holding current of 10mA, and trigger device type.
TIC205A
TIC205A by Texas Instruments is a TRIAC with 2A RMS on-state current, 5mA max DC gate trigger current, and 100V repetitive peak off-state voltage. Ideal for AC switching applications in devices like dimmers, motor speed controllers, and heating control systems.
BTA12-600CRG
New Jersey Semiconductor Products
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA06-600CRG
BTA06-600CRG by STMicroelectronics is a 4 quadrant logic level TRIAC with 600V repetitive peak off-state voltage. It has a max RMS on-state current of 6A and can operate in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise AC power control, such as dimmer switches and motor speed controllers.
BTA40-700B
BTA40-700B by STMicroelectronics is a single TRIAC with 315A non-repetitive peak on-state current and 40A max RMS on-state current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring high power switching capabilities. The device features a trigger device type of 4-quadrant logic level TRIAC, ideal for controlling AC loads in industrial and consumer electronics.
DTC10N
DTC10N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 10A max RMS on-state current. Ideal for AC power control applications due to its TRIAC trigger device type and 200V repetitive peak off-state voltage capability.
TG35C60
Hbcontrols
TG35C60 by Hbcontrols is a TRIAC with 35A RMS current and 600V repetitive peak off-state voltage. It has a plastic/epoxy body, single configuration, and solder lug terminals. Ideal for applications requiring AC power control in devices like dimmers, motor speed controllers, and heating equipment.
BTA12-600CW3G
Littelfuse
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
TIC263B
TIC263B by Texas Instruments is a TRIAC with 25A RMS current, 200V repetitive peak off-state voltage, and 50mA max holding current. It operates b/w -40 to 110°C and has a trigger voltage of 2.5V. Ideal for AC power control applications requiring precise switching capabilities.
TIC246A
TIC246A by Texas Instruments is a TRIAC with max. RMS On-state Current of 16A, DC Gate Trigger Voltage of 2.5V, and Operating Temp. range from -40 to 110°C. It is used as a trigger device in AC circuits for applications requiring precise current control and switching capabilities.
Z0107MN0,135
NXP Semiconductors
Z0107MN0,135 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It has a 5mA max DC gate trigger current and operates b/w -40°C to 150°C. Ideal for AC power control applications requiring precise switching capabilities.
TIC226M
Bourns
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Z0410MF1AA2
Z0410MF1AA2 by STMicroelectronics is a TRIAC with 4A RMS on-state current, 600V repetitive peak off-state voltage, and 25mA max holding current. It is used in applications requiring AC power control such as dimmers, motor speed control, and heating control systems.
BT136S-600D,118
Ween Semiconductors
BT136S-600D,118 by Ween Semiconductors is a TRAIC with a maximum operating temperature of 125°C and a repetitive peak off-state voltage of 600V. It has a maximum RMS on-state current of 4A and features a sensitive gate. This device is commonly used in 4 quadrant logic level TRIAC applications.
MAC997A6G
MAC997A6G by Onsemi is a single TRIAC with 3 terminals, featuring a max DC gate trigger current of 5 mA and a max RMS on-state current of 0.8 A. It operates in temperatures ranging from -40 to 110 °C, making it suitable for various applications requiring precise AC switching control.
BTA06-600BRG
BTA06-600BRG by STMicroelectronics is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage and 6A max RMS on-state current. It has a max DC gate trigger current of 50mA and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in industrial settings.
ACS120-7ST
ACS120-7ST by STMicroelectronics is a TRIAC with max. DC gate trigger current of 10mA, non-repetitive peak on-state current of 20A, and max. RMS on-state current of 2A. It is used in applications requiring snubberless TRIACs for AC switching operations at temperatures ranging from -30°C to 125°C.
TRIAC; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Minimum Critical Rate of Rise of Off-state Voltage: 100 V/us; Maximum Leakage Current: .5 mA; Maximum DC Gate Trigger Voltage: 1.3 V;
Z0103NN5AA4
Z0103NN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with max. RMS on-state current of 1A and repetitive peak off-state voltage of 800V. It operates b/w -40 to 125°C, suitable for AC power control applications in various industries.
MAC4SM
MAC4SM by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 125 °C, with a gate trigger voltage of 1.3V and a max DC gate trigger current of 10mA. Ideal for applications requiring precise switching control in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QJ6025RH5TP
ALTERNISTOR TRIAC; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
QJ6004V3TP
TRIAC; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn);
QJ6008DH3TP
ALTERNISTOR TRIAC; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
QJ6006DH4RP
ALTERNISTOR TRIAC; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
QJ6008DH2TP
ALTERNISTOR TRIAC;
QJ6006DH3RP
ALTERNISTOR TRIAC; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn);
QJ6008DH4RP
ALTERNISTOR TRIAC; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN;
QJ6004D3TP
TRIAC; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
QJ6006DH4TP
ALTERNISTOR TRIAC; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn); Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
QJ6006VH2TP
QJ6008DH2RP
QJ6006DH2TP
QJ6008DH3RP
ALTERNISTOR TRIAC; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn);
QJ6004D4TP
TRIAC; Terminal Finish: Matte Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
QJ6006VH3TP
ALTERNISTOR TRIAC; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40;
QJ6006DH3TP
ALTERNISTOR TRIAC; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
QJ6004D3RP
TRIAC; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn);
QJ6004D4RP
QJ6006DH2RP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved