Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .035 A;
Median Price
$0.116
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.676
100+ parts
$0.615
1k+ parts
$0.554
10k+ parts
-
Rochester
$0.102
$0.085
$0.075
DigiKey
$0.130
Verical
$0.094
Digiode
$0.079
Vyrian
$0.083
DigiKey Marketplace
Tectiva GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Modulus Dynamics
$0.074
$0.071
$0.068
Corohmni
Corphita
Advanced Electronics
Kepictronics
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Authorized Procurement Solutions
Glotronic Ltd.
Alle Elektronik GmbH
Northwest PG Solutions
Assy Fe
Native Components
Perfect Parts
RF Small Signal Bipolar Junction Transistors (BJT) BFP182WE6327 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Infineon Technologies
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BFP182WE6327 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BF240RLRA
BF240RLRA by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 40V and max operating temp of 150 °C. Ideal for amplifier applications, it has a fT of 600MHz and low collector-base capacitance at 0.34pF.
MSC82100
STMicroelectronics' MSC82100 is an NPN BJT transistor with a hFE of 15, ideal for amplifier applications in L Band frequencies. With a max operating temp of 200 °C and fT of 1600 MHz, it offers a collector-emitter voltage of 20V and collector current up to 0.2A.
EC4H08C
The Onsemi EC4H08C is an NPN RF BJT with a single configuration for surface mount applications. It features a max power dissipation of 0.05W, min DC current gain of 70, and max operating temp of 150 °C. Ideal for high-frequency circuits up to 18GHz in various electronic devices.
2N3553
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): 7 W; Maximum Collector Current (IC): 1 A;
HFA3127RZ96
Intersil
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Body Material: PLASTIC/EPOXY;
BFP650FH6327XTSA1
Infineon Technologies
RF Small Signal Bipolar Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
HFA3046BZ
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
NSVF4017SG4T1G
NSVF4017SG4T1G by Onsemi is a NPN BJT transistor with 4 terminals, operating in X Band frequency range up to 10GHz. It has a max power dissipation of 0.45W and can handle collector-emitter voltage of 12V. Ideal for amplifier applications due to its high transition frequency and AEC-Q101 compliance.
CA3083M96
Harris Semiconductor
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G16;
MCH4017-TL-H
MCH4017-TL-H by Onsemi is an NPN RF BJT with 4 terminals, operating at 150°C max. It has a transition frequency of 10GHz, 0.1A collector current, and 12V collector-emitter voltage. Ideal for ultra-high frequency applications due to its small outline package and high power dissipation of 0.45W.
BFU910FX
NXP Semiconductors
NXP Semiconductors' BFU910FX is a NPN RF BJT transistor with 4 terminals, suitable for K Band applications. With a max fT of 90 GHz and IC of 0.015 A, it's ideal for amplifier circuits requiring high-frequency performance in small outline packages. The device features silicon germanium element material and can withstand peak reflow temp of 260°C per IEC-60134 standard.
2SC5245A-4-TL-E
The Onsemi 2SC5245A-4-TL-E is an NPN RF BJT with a max power dissipation of 0.15W, fT of 5000MHz, and hFE min of 60. Ideal for high-frequency applications in surface-mount configurations due to its low collector current and high operating temperature capabilities.
2N3569
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
HFA3135IHZ96
PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Collector Current (IC): .026 A; JESD-30 Code: R-PDSO-G6;
BFR193FH6327XTSA1
BFR193FH6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 3 terminals, suitable for L Band applications. It has a max collector-emitter voltage of 12V, max collector current of 0.08A, and transition frequency of 8000MHz. Ideal for amplifier circuits in automotive electronics due to AEC-Q101 compliance.
934059126115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .03 A; No. of Terminals: 4;
MSC2295-CT1
The Onsemi MSC2295-CT1 is an NPN RF BJT transistor with a max operating temp of 150 °C. It has a min hFE of 110 and max fT of 150 MHz, making it ideal for amplifier applications. With a small outline package style and Gull Wing terminals, it's suitable for surface mount designs.
HFA3127BZ
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JEDEC-95 Code: MS-012AC;
BFR93A,215
NXP Semiconductors' BFR93A,215 is a NPN RF BJT transistor with max. freq. of 6000 MHz and hFE of 40, ideal for L Band applications like amplifiers. It has a max. power dissipation of 0.35 W, operates up to 175°C, and features a small outline package with gull wing terminals for surface mount assembly.
BFP843H6327XTSA1
BFP843H6327XTSA1 by Infineon is a NPN RF BJT transistor with 4 terminals, suitable for C band applications. It has a max power dissipation of 0.125W, hFE of 150, and operates up to 150°C. Ideal for amplifier circuits in high-frequency communication systems due to its small outline package and low collector-emitter voltage of 2.25V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFP183E7764HTSA1
RF Small Signal Bipolar Transistors; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
BFP196WH6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7500 MHz; Maximum Collector Current (IC): .15 A; Additional Features: LOW NOISE;
BFP193E6327HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Power Dissipation (Abs): .58 W; Maximum Collector Current (IC): .08 A;
BFP182WH6327XTSA1
BFP182WH6327XTSA1 by Infineon is a NPN RF BJT transistor with 4 terminals, suitable for L Band applications. It has a max collector-emitter voltage of 12V, fT of 8000 MHz, and IC of 0.035A. Ideal for amplifier circuits due to its high transition frequency and low collector-base capacitance.
BFP193WH6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .08 A; Terminal Position: DUAL;
BFP196E6327HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7500 MHz; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
BFP182RE7764HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .035 A; Transistor Application: AMPLIFIER;
BFP181W
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Power Dissipation (Abs): .175 W; Maximum Collector Current (IC): .02 A;
BFP181WE6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .02 A; Package Body Material: PLASTIC/EPOXY;
BFP136WE6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5500 MHz; Maximum Collector Current (IC): .15 A; Moisture Sensitivity Level (MSL): 1;
BFP180W
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Power Dissipation (Abs): .03 W; Maximum Collector Current (IC): .004 A;
BFP182
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .035 A;
BFP182R
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .035 A; Terminal Form: GULL WING;
BFP181R
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .02 A; JESD-30 Code: R-PDSO-G4;
BFP182W
BFP180E6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Collector Current (IC): .004 A; Maximum Collector-Emitter Voltage: 8 V;
BFP182E6327
BFP181
BFP182-E6433
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .035 A; Minimum DC Current Gain (hFE): 70; Transistor Element Material: SILICON;
BFP182WE6327
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .035 A; Maximum Collector-Base Capacitance: .45 pF;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved