Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Mil-Aero Solutions, Inc.
Resion
Cogito LLC
J2 Sourcing AB
Prism Electronics
AZTECH Wire
$4.300
$4.130
$4.050
$3.970
Parana Technologies
$11.498
$10.693
IDEA Electronic Components Group
$12.363
$11.745
DigiPath Technology Company
$19.286
$18.515
One Stop Electronics
$605.000
Semicontronic
$609.000
$593.775
$590.730
QUARKTWIN TECHNOLOGY LTD
RC Electronics
Authorized Procurement Solutions
S.R.D Solutions
Corphita
Perfect Parts
Kepictronics
GreenTree Electronics
Speed Components Ltd (Excess)
Cellphone ICs HMC422MS8E attributes and parameters. Explore more Cellphone ICs devices from Hittite Microwave
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
HMC422MS8E Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Rugao Dachang Electronic
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
MAX2900ETI+T
Analog Devices
Analog Devices' MAX2900ETI+T is a cellphone IC with 28 terminals in a square chip carrier package. Operating from -40 to 85°C, it's ideal for industrial telecom applications requiring RF and baseband circuit integration. With a nominal voltage of 4.5V, this IC features a very thin profile and matte tin terminal finish for robust performance.
CC1110F8RSP
Texas Instruments
CC1110F8RSP by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. This RF and baseband circuit has a nominal voltage of 3V and terminal pitch of 0.5mm, ideal for telecom devices.
AFE7700IALK
AFE7700IALK by Texas Instruments is a Cellphone IC with 400 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a fine pitch grid array style, making it ideal for telecom applications.
TS3A26746EYZPR
TS3A26746EYZPR by Texas Instruments is a 6-terminal cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature range -40 to 85°C with 2 channels for baseband circuits at a nominal voltage of 3.3V. Ideal for compact mobile devices due to its small dimensions 1.4mm x 0.9mm x 0.5mm.
MAX4003ETA+
Maxim Integrated
MAX4003ETA+ by Maxim Integrated is a cellphone IC with 8 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial telecom applications. Features RF and baseband circuits, with nominal voltage of 3V for compact design.
AT86RF233-ZUR
Microchip Technology
AT86RF233-ZUR by Microchip Technology is a cellphone IC with 32 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 3V, CMOS technology, and RF/baseband circuitry. This surface-mount chip carrier has a compact square shape ideal for telecom applications.
TRF3762-EIRHATG4
TRF3762-EIRHATG4 by Texas Instruments is a cellphone IC with 40 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and consumes 0.15mA current. This RF and baseband circuit in a square package is ideal for industrial telecom applications.
NRF9160-SIBA-B1A-R
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIBA-B1A-R is a CELL IC with RF & BASEBAND CIRCUIT for telecom. It operates in -40 to 85°C, has 127 terminals in GRID ARRAY package style, and requires 3.8V supply voltage. Ideal for cellphone applications due to its compact RECTANGULAR shape and 0.5mm terminal pitch.
CC2591RGVR
CC2591RGVR by Texas Instruments is a cellphone IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF front end circuitry, operates at 3V, and draws a max supply current of 4mA.
TLV321AC37CPT
TLV321AC37CPT by Texas Instruments is a 48-terminal cellphone IC with CMOS technology. It operates b/w 0-70°C, has a nominal voltage of 3V, and features a low-profile flatpack package style. Ideal for baseband circuits in telecom applications due to its fine pitch and gull wing terminal form.
ADF7021-NBCPZ-RL7
Analog Devices ADF7021-NBCPZ-RL7 is a 48-terminal cellphone IC with 2.5/3.3V power supplies, operating from -40 to 85°C. It features CMOS technology, NO LEAD terminal form, and is ideal for BASEBAND CIRCUIT applications due to its compact square package style and industrial temperature grade suitability.
SARA-R500S-61B
U-blox Ag
RF AND BASEBAND CIRCUIT;
AD8366ACPZ-R7
AD8366ACPZ-R7 by Analog Devices is a Cellphone IC with 2 functions, operating at -40 to 85 °C. It features a square package style, 32 terminals, and matte tin finish. Ideal for telecom applications as a baseband circuit with a nominal voltage of 5V.
HMC485MS8G
HMC485MS8G by Analog Devices is a Cellphone IC with 8 terminals, operating temperature range of -40 to 85°C, and supply voltage of 5V. It is used in RF and baseband circuits for telecommunications applications.
MAX5865E/D
Analog Devices' MAX5865E/D is a cellphone IC with CMOS technology, operating b/w -40 °C to 85°C. It features an unencased chip package, tin lead finish, and 3V supply voltage. Ideal for RF and baseband circuits in industrial-grade telecom applications.
TRF370417TDA1
RF AND BASEBAND CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ADF4360-9BCPZ
Analog Devices' ADF4360-9BCPZ is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates at -40 to 85°C, with a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it features matte tin finish and very thin profile for industrial telecom applications.
CC2511F16RSPG3
CC2511F16RSPG3 by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. Operating at temperatures from -40 to 85°C, it features CMOS technology and RF/baseband circuitry for telecom applications. With a supply voltage of 3V, this IC is surface mountable and has a terminal pitch of 0.5mm.
TLV320AC57IPT
TLV320AC57IPT by Texas Instruments is a 48-terminal cellphone IC with 3V supply voltage, operating from -40 to 85°C. It features A-LAW companding law, 13-bit linear coding, and a baseband circuit for telecom applications. The package is a low-profile flatpack with gull wing terminals, suitable for industrial temperature grades.
TRF370417IRGER
TRF370417IRGER by Texas Instruments is a cellphone IC with 24 terminals in a square chip carrier package. It operates at -40 to 85°C, with a supply voltage of 5V and max current of 0.245mA. This RF and baseband circuit has a terminal pitch of 0.5mm, suitable for industrial telecom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved