Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DMP3028LSD-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, 6A ID, and 0.025 ohm RDS(on). Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a SMALL OUTLINE package with 8 terminals. Operating from -55 to 150 °C, it meets MIL-STD-202 standards.
Median Price
$0.487
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.340
100+ parts
$0.546
1k+ parts
-
10k+ parts
DigiKey
$1.370
$0.562
Future Electronics
$0.750
Newark
$0.616
$0.552
$0.501
Verical
$0.156
Arrow
$0.157
Farnell
$0.354
$0.206
$0.202
Element14
$0.358
$0.230
$0.225
Nova Conductors
$0.265
Chip Stock
IBS Electronics
$1.058
Vyrian
NAC Semi
$0.257
Ampacity Inc.
$0.167
Continental Prestige Electronics
$0.259
Argo Parts USA
Corohmni
$1.847
Lixinc
Eastek
Futuretech Components
Provides good protection and insulation for the transistors.
Suitable for applications requiring P-channel transistors.
Allows for versatile circuit design options and built-in diode offers protection.
Ideal for use in switching circuits.
Convenient for surface mount applications, saving space on PCB.
Suitable for applications requiring a minimum breakdown voltage of 30V.
Can handle power dissipation efficiently.
Can operate effectively at high temperatures.
Low on-resistance for efficient switching.
Controls the amount of feedback capacitance for stability in switching applications.
Power Field Effect Transistors (FET) DMP3028LSD-13 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Diodes Incorporated
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
DMP3028LSD-13 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev 06/Dec/2019
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
261
Deltrol Controls
Other Relays;
General Semiconductor
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
IRF7507TRPBF
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Maximum Pulsed Drain Current (IDM): 19 A; Package Style (Meter): SMALL OUTLINE;
SQJ431EP-T1_GE3
Vishay Intertechnology's SQJ431EP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 40A IDM, and 0.221 ohm RDS(ON). Ideal for power applications requiring high drain current and low on-resistance in a small outline package.
IPT020N10N3ATMA1
Infineon Technologies
IPT020N10N3ATMA1 by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, 1200A IDM, and 0.02 ohm RDS(on). Ideal for power applications requiring high drain current handling and low on-resistance. Suitable for use in power supplies, motor control, and automotive systems due to its high power dissipation capability.
SI7850DP-T1-GE3
Vishay Intertechnology's SI7850DP-T1-GE3 is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. It features 40A IDM and 11mJ EAS, operating in enhancement mode. With a compact rectangular package style and flat terminals, it offers high performance in a small outline design.
IRF9530NPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Maximum Drain-Source On Resistance: .2 ohm; Maximum Pulsed Drain Current (IDM): 56 A;
FQT4N20LTF
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.2 W; JESD-30 Code: R-PDSO-G4; Moisture Sensitivity Level (MSL): 1;
NDT3055L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
IRFP4468PBF
IRFP4468PBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 1120A and EAS of 740mJ, ideal for SWITCHING applications. With 0.0026 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
JANTX2N6796
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: WIRE; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
NDT3055
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain-Source On Resistance: .1 ohm; Package Body Material: PLASTIC/EPOXY;
IRF640NSTRLPBF
Infineon's IRF640NSTRLPBF is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 72A IDM, 247mJ EAS, and 0.15 ohm RDS(ON). Operating from -55 to 175 °C, this MOSFET has a max power dissipation of 150W in a small outline package.
AUIRF7316QTR
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Maximum Drain Current (ID): 4.9 A; No. of Terminals: 8;
FDS4465
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Operating Mode: ENHANCEMENT MODE;
FDS4559_F085
FDS4559_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 60V DS Breakdown Voltage. It features 2 elements with built-in diode, suitable for SWITCHING applications. With 20A IDM and 0.055 ohm RDS(on), it operates in ENHANCEMENT MODE at up to 150°C, making it ideal for high-power electronics.
IRF1010NSTRLPBF
IRF1010NSTRLPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 290A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has 0.011 ohm Drain-Source On Resistance and can handle up to 170W power dissipation.
CSD18563Q5A-P
CSD18563Q5A-P by Texas Instruments is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 251A IDM, and 0.0108 ohm Drain-Source On Resistance. With a max operating temperature of 150°C, this MOSFET is suitable for high-power switching tasks in various electronic devices.
FQD12N20LTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Minimum DS Breakdown Voltage: 200 V; Terminal Form: GULL WING;
NTR4501NT1G
NTR4501NT1G by Onsemi is a Power FET with N-CHANNEL polarity, suitable for SWITCHING applications. It features a 20V DS Breakdown Voltage, 10A Max Pulsed Drain Current, and 0.08 ohm Max Drain-Source Resistance. Ideal for high-power switching circuits in various electronic devices.
G3R160MT12D
Genesic Semiconductor
Power Field-Effect Transistors;
BSP318SH6327
Infineon's BSP318SH6327 is a N-CHANNEL FET with 60V DS Breakdown Voltage and 10.4A IDM. Ideal for automotive applications due to AEC-Q101 standard compliance, it features 0.15 ohm RDS(ON) and 60mJ EAS rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DMP3099L-7
Diodes Incorporated
DMP3099L-7 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a low on-resistance of 0.065 ohm. Suitable for surface mount designs with small outline package style.
DMP3098L-7
DMP3098L-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max pulsed drain current of 11A. It is used for switching applications and operates in enhancement mode.
DMP3056LDM-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Transistor Element Material: SILICON; JESD-609 Code: e3;
DMP3056L-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .05 ohm; JESD-609 Code: e3; Maximum Drain Current (ID): 4.3 A;
DMP3098LQ-7
Power Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
DMP3099L-13
DMP3099L-13 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 1.08W. Suitable for surface mount designs in automotive electronics due to AEC-Q101 compliance and high temp rating of 150°C.
DMP3099LQ-7
DMP3099LQ-7 by Diodes Inc. is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 11A IDM, and 10.2mJ EAS rating. Operates in -55 to 150°C range with 9.8ns ton and 46ns toff times, ideal for automotive (AEC-Q101) and industrial electronics due to its small outline package style and high power dissipation capability of 1.08W.
DMP3099LQ-13
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.08 W; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1;
DMP3056LSD-13
DMP3056LSD-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, 24A IDM, and 0.045 ohm RDS(ON). Ideal for SWITCHING applications in small outline packages with 8 terminals. Operating at max temp of 150°C, it features METAL-OXIDE SEMICONDUCTOR tech and matte tin finish for enhanced performance.
DMP3056LDM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Additional Features: HIGH RELIABILITY; Package Body Material: PLASTIC/EPOXY; No. of Terminals: 6;
DMP3056LSS-13
DMP3056LSS-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, 7.1A Drain Current, and 0.036 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE and ENHANCEMENT MODE operation. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
DMP3010LK3-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.4 W; Avalanche Energy Rating (EAS): 113 mJ; Maximum Pulsed Drain Current (IDM): 100 A;
DMP3056LSDQ-13
DMP3056LSDQ-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 24A IDM, 0.045 ohm RDS(on), and 92pF Crss. Operates in -55 to 150 °C range, AEC-Q101 compliant, and suitable for surface mount designs.
DMP3098LSS-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain-Source On Resistance: .065 ohm; Terminal Form: GULL WING;
DMP3056LDMQ-7
DMP3056LDMQ-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max drain current of 4.3A. It is used in applications requiring high power dissipation and operates at temperatures up to 150°C.
DMP3017SFGQ-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Reference Standard: AEC-Q101; JESD-30 Code: S-PDSO-N5; Maximum Pulsed Drain Current (IDM): 80 A;
DMP3011SFVWQ-7
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
DMP3056L-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Pulsed Drain Current (IDM): 20 A; JESD-609 Code: e3;
DMP3007SFG-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.8 W; Transistor Application: SWITCHING; Maximum Feedback Capacitance (Crss): 305 pF;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved