Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DMP3099L-13 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 1.08W. Suitable for surface mount designs in automotive electronics due to AEC-Q101 compliance and high temp rating of 150°C.
Median Price
$0.109
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$0.355
100+ parts
$0.143
1k+ parts
$0.098
10k+ parts
-
Mouser Electronics
$0.410
$0.154
$0.100
Verical
$0.049
Arrow
$0.044
Farnell
$0.082
$0.041
$0.040
Element14
$0.136
$0.074
$0.073
Mobius Materials
$0.030
Nova Conductors
$0.076
Ozdisan Elektronik
$56.010
TME
$0.046
IBS Electronics
$0.121
NAC Semi
Vyrian
Bristol Electronics
Chip Stock
Rutronik
$0.060
Atlantic Semiconductor
Prism Electronics
Decca Corp
$0.037
$0.036
Semicontronic
Ampacity Inc.
Netroflash
$0.075
Argo Parts USA
Continental Prestige Electronics
$0.322
$0.123
$0.061
$0.042
Aztec Data Supply Inc.
$0.780
Modulus Dynamics
$1.381
Advanced Electronics
$1.495
$1.420
Benley Electronics
$1.750
Corohmni
$1.773
Glotronic Ltd.
Infinite Electronics LLP (Excess)
iodParts Technologies Inc.
GreenTree Electronics
Authorized Procurement Solutions
Lixinc
This material is durable and cost-effective, making the product suitable for a variety of applications.
P-channel FETs are known for their low on-resistance and high current-carrying capabilities, making them efficient for switching applications.
The built-in diode simplifies circuit design and provides protection against reverse polarity, enhancing the reliability of the product.
Surface mount technology allows for easy and compact PCB assembly, making the product suitable for modern electronics.
Designed specifically for switching applications, this FET offers fast switching speeds and low on-state resistance for efficient performance.
With a high breakdown voltage, this FET can handle higher voltage levels, making it suitable for a wide range of applications.
The high pulsed drain current capability allows for reliable operation in applications that require short bursts of high current.
The high drain current rating ensures that the FET can handle continuous current flow without overheating or failure.
The low power dissipation helps in reducing heat generation and energy consumption, leading to improved efficiency.
With low on-resistance, this FET minimizes power loss and heat dissipation, improving overall efficiency.
Power Field Effect Transistors (FET) DMP3099L-13 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Diodes Incorporated
Additional Features:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
DMP3099L-13 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Assembly REV 07/Sep/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
ROHM
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BSC190N15NS3GATMA1
Infineon BSC190N15NS3GATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, ideal for switching applications. Features include 200A IDM, 170mJ EAS, and 0.019 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 125W in a small outline package.
NX3008NBKW,115
NXP Semiconductors
NX3008NBKW,115 by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 0.35A and power dissipation of 0.31W. It operates in enhancement mode, suitable for applications requiring high temperature resistance up to 150°C such as power management systems.
FDBL86062_F085
Fairchild Semiconductor
Fairchild Semiconductor's FDBL86062_F085 is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 300A Drain Current. Ideal for SWITCHING applications, it features an EAS of 352mJ, 0.002 ohm On Resistance, and operates in ENHANCEMENT MODE.
DMG2305UX-13
DMG2305UX-13 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage and 4.2A max drain current, ideal for switching applications. It features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 1.4W. This MOSFET is surface mountable, with Gull Wing terminals and can withstand temperatures up to 150°C.
DMP3099L-7
DMP3099L-7 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a low on-resistance of 0.065 ohm. Suitable for surface mount designs with small outline package style.
SI7288DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7288DP-T1-GE3 is an N-channel FET with 2 separate elements and built-in diode, ideal for switching applications. Features include max pulsed drain current of 50A, avalanche energy rating of 5mJ, and max power dissipation of 15.6W. With a max operating temperature of 150°C, this MOSFET has a drain-source on resistance of 0.019 ohm and can handle a max drain current of 10A.
FDMS86350ET80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 187 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 5;
SI7461DP-T1-E3
Vishay Intertechnology's SI7461DP-T1-E3 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 8.6A ID, and 0.0145 ohm RDS(on). Ideal for SWITCHING applications, it features a 60A IDM and 125mJ EAS in a SMALL OUTLINE package with an operating temp of 150°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
RFD16N05LSM9A
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 16 A; Terminal Position: SINGLE; Package Style (Meter): SMALL OUTLINE;
FQD7P20TM
Onsemi
FQD7P20TM by Onsemi is a P-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 22.8A and EAS of 570mJ, operating in ENHANCEMENT MODE at up to 150°C.
CSD19536KTT
Texas Instruments
CSD19536KTT by Texas Instruments is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 400A and EAS of 806mJ, operating in ENHANCEMENT MODE. This PLASTIC/EPOXY transistor has a max ID of 200A and 0.0028 ohm RDS(on), suitable for high-power switching circuits.
BSP613PH6327XTSA1
BSP613PH6327XTSA1 by Infineon Technologies is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 11.6A and 0.13 ohm Drain-Source On Resistance, suitable for ENHANCEMENT MODE operation in automotive systems (AEC-Q101).
IPT007N06NATMA1
IPT007N06NATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, 1944A IDM, and 0.00075 ohm RDS(ON). Ideal for power applications requiring high drain current handling and low on-resistance. Suitable for use in power supplies, motor control, and automotive systems due to its high power dissipation capability.
BSC160N15NS5ATMA1
BSC160N15NS5ATMA1 by Infineon is a N-CHANNEL Power FET with 150V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a max IDM of 224A and 0.016 ohm Drain-Source On Resistance. The transistor's METAL-OXIDE SEMICONDUCTOR technology and SILICON material make it reliable for high-power operations.
FDD4243_F085
Fairchild Semiconductor's FDD4243_F085 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 24A Drain Current, and 0.044 ohm On Resistance. Ideal for SWITCHING applications in automotive (AEC-Q101) and industrial sectors due to its high power dissipation of 42W and wide operating temperature range (-55 to 175 °C).
IRFP460
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Minimum DS Breakdown Voltage: 500 V; JEDEC-95 Code: TO-247;
FQD12N20LTM-F085
FQD12N20LTM-F085 by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 9A, Max Pulsed Drain Current of 36A, and Max Power Dissipation of 55W. This ENHANCEMENT MODE transistor operates b/w -55 to 150 °C and has a fast turn on/off time for efficient performance.
STD35P6LLF6
STD35P6LLF6 by STMicroelectronics is a P-CHANNEL FET with 60V DS breakdown voltage, 140A IDM, and 0.036 ohm RDS(on). It is used for switching applications in enhancement mode with a max power dissipation of 70W.
IPA80R1K0CEXKSA2
Infineon's IPA80R1K0CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 18A IDM, 230mJ EAS, and 0.95 ohm RDS(on). Package style: FLANGE MOUNT, technology: MOSFET, element material: Si.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDN360P
FDN360P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 0.08 ohm max RDS(on). Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With 2A max drain current, this MOSFET has a small outline package style suitable for surface mount designs.
DMP3098L-7
DMP3098L-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max pulsed drain current of 11A. It is used for switching applications and operates in enhancement mode.
DMP3056LDM-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Transistor Element Material: SILICON; JESD-609 Code: e3;
DMP3056L-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .05 ohm; JESD-609 Code: e3; Maximum Drain Current (ID): 4.3 A;
DMP3098LQ-7
Power Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
DMP3099LQ-7
DMP3099LQ-7 by Diodes Inc. is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 11A IDM, and 10.2mJ EAS rating. Operates in -55 to 150°C range with 9.8ns ton and 46ns toff times, ideal for automotive (AEC-Q101) and industrial electronics due to its small outline package style and high power dissipation capability of 1.08W.
DMP3099LQ-13
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.08 W; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1;
DMP3056LSD-13
DMP3056LSD-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, 24A IDM, and 0.045 ohm RDS(ON). Ideal for SWITCHING applications in small outline packages with 8 terminals. Operating at max temp of 150°C, it features METAL-OXIDE SEMICONDUCTOR tech and matte tin finish for enhanced performance.
DMP3056LDM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Additional Features: HIGH RELIABILITY; Package Body Material: PLASTIC/EPOXY; No. of Terminals: 6;
DMP3056LSS-13
DMP3056LSS-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, 7.1A Drain Current, and 0.036 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE and ENHANCEMENT MODE operation. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
DMP3010LK3-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.4 W; Avalanche Energy Rating (EAS): 113 mJ; Maximum Pulsed Drain Current (IDM): 100 A;
DMP3056LSDQ-13
DMP3056LSDQ-13 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 24A IDM, 0.045 ohm RDS(on), and 92pF Crss. Operates in -55 to 150 °C range, AEC-Q101 compliant, and suitable for surface mount designs.
DMP3098LSS-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain-Source On Resistance: .065 ohm; Terminal Form: GULL WING;
DMP3056LDMQ-7
DMP3056LDMQ-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max drain current of 4.3A. It is used in applications requiring high power dissipation and operates at temperatures up to 150°C.
DMP3017SFGQ-7
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Reference Standard: AEC-Q101; JESD-30 Code: S-PDSO-N5; Maximum Pulsed Drain Current (IDM): 80 A;
DMP3011SFVWQ-7
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
DMP3056L-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Pulsed Drain Current (IDM): 20 A; JESD-609 Code: e3;
DMP3007SFG-13
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.8 W; Transistor Application: SWITCHING; Maximum Feedback Capacitance (Crss): 305 pF;
DMP3028LSD-13
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.7 W; Moisture Sensitivity Level (MSL): 1; Reference Standard: MIL-STD-202;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved