Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Motion control ICs are electronic components designed to control and regulate the movement of mechanical systems. They are used in a wide range of applications, including robotics, manufacturing equipment, and aerospace systems.Motion control ICs use various technologies to control motion, including microcontrollers, motor drivers, and sensors. They can be used to control the speed, position, and direction of motors, actuators, and other mechanical systems.One of the main applications of motion control ICs is in robotics, where they are used to control the movement of robot arms, legs, and other components. They can also be used in manufacturing equipment to control the movement of conveyor belts, assembly lines, and other machinery.Motion control ICs can provide high levels of precision and accuracy in controlling motion. They are often designed to operate in harsh environments and can withstand high temperatures, vibration, and shock.
Add filters
All
Selected
LB11852FV-TLM-H
Onsemi
LB11852FV-TLM-H by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 5.5-16 V, and max output current of 0.02 A. Ideal for AC motor control applications due to its compact size, low profile package style, and dual terminal position design. Operating temperature ranges from -30 to 95 °C.
ALSO OPERATES WITH THE RANGE OF 4.5V TO 5.5V SUPPLY
AC MOTOR CONTROLLER
R-PDSO-G20
e6
5.2 mm
3
1
20
95 Cel
-30 Cel
.02 A
PLASTIC/EPOXY
LSSOP
RECTANGULAR
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
260
1.5 mm
16 V
5.5 V
12 V
YES
OTHER
TIN BISMUTH
GULL WING
.5 mm
DUAL
30
4.4 mm
DRV3204EPHPQ1
Texas Instruments
DRV3204EPHPQ1 by Texas Instruments is a Motion Control IC with 48 terminals and a supply voltage range of 5.3V to 18V. It operates in automotive-grade temperatures from -40°C to 150°C, making it suitable for brushless DC motor control applications. This surface-mountable IC features a flatpack package style and nickel palladium gold terminal finish.
ALSO OPERATES WITH THE RANGE OF 4.5V TO 18V AND 18V TO 26.5V SUPPLY
BRUSHLESS DC MOTOR CONTROLLER
S-PQFP-G48
e4
7 mm
48
150 Cel
-40 Cel
HTFQFP
TQFP48,.35SQ
SQUARE
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
12
Not Qualified
AEC-Q100
1.2 mm
Motion Control Electronics
27 mA
18 V
5.3 V
AUTOMOTIVE
NICKEL PALLADIUM GOLD
QUAD
DRV8301QDCAQ1
Texas Instruments' DRV8301QDCAQ1 is a Motion Control IC with 56 terminals and a supply voltage range of 6-60V. It operates b/w -40 to 125°C, suitable for automotive applications. The IC features a small outline package with gull wing terminals, ideal for brushless DC motor controllers.
R-PDSO-G56
14 mm
56
125 Cel
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
60 V
6 V
8 V
6.1 mm
DRV8301QDCARQ1
DRV8301QDCARQ1 by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage range of 6-60V, and temp. range of -40 to 125°C. Ideal for automotive applications, it's a BLDC motor controller in a small outline package suitable for surface mount assembly.
DRV3204EPHPRQ1
DRV3204EPHPRQ1 by Texas Instruments is a Motion Control IC with 48 terminals, operating at -40 to 150°C. It is an AEC-Q100 qualified BRUSHLESS DC MOTOR CONTROLLER suitable for automotive applications. With a supply voltage range of 5.3V to 18V and low supply current of 27mA, it offers robust performance in compact FLATPACK package style.
STK57FU391A-E
STK57FU391A-E by Onsemi is a Motion Control IC with 25 terminals, operating voltage range of 0-400V. It features a max output current of 40A and terminal finish in Tin Nickel. Ideal for AC motor control applications due to its flange mount package style and zig-zag terminal position.
R-PZFM-T25
e2
25
40 A
FLANGE MOUNT
400 V
0 V
280 V
NO
TIN NICKEL
THROUGH-HOLE
ZIG-ZAG
STK5F1U3E2D-E
STK5F1U3E2D-E by Onsemi is a Motion Control IC with 37 terminals, operating voltage of 13.5-16.5V, and max output current of 76A. Ideal for AC motor control applications due to its hybrid technology, rectangular package shape, and dual terminal position.
SEATED HGT-NOM
R-XDMA-T37
e3
76 mm
37
100 Cel
-20 Cel
76 A
UNSPECIFIED
DIP36/44,2
MICROELECTRONIC ASSEMBLY
15
6 mm
4 mA
16.5 V
13.5 V
15 V
HYBRID
MATTE TIN
2.54 mm
45 mm
STK5F4U3E2D-E
STK5F4U3E2D-E by Onsemi is a motion control IC with a max output current of 100A. It operates at a nominal voltage of 15V and has a package style of microelectronic assembly. This IC is commonly used as an AC motor controller in various applications.
R-PDMA-T37
100 A
DIP37/44,2
LB11899J-MPB-E
LB11899J-MPB-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 75 °C. It has a supply voltage range of 4-6V and can handle up to 1.1A output current. Ideal for Disk Drive Motor Controllers due to its small outline package and low profile design.
DISK DRIVE MOTOR CONTROLLER
R-PDSO-G44
15 mm
44
75 Cel
1.1 A
HLSSOP
SSOP44,.3
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
5,12
1.7 mm
25 mA
4 V
5 V
BIPOLAR
COMMERCIAL EXTENDED
.65 mm
5.6 mm
A4939KLPTR-3-T
Allegro MicroSystems
Allegro MicroSystems' A4939KLPTR-3-T is a Motion Control IC with 28 terminals, operating voltage range of 7V to 50V. Ideal for automotive applications, it offers a wide temperature range from -40°C to 150°C. The compact rectangular package with gull wing terminals and thin profile makes it suitable for brushless DC motor control in tight spaces.
R-PDSO-G28
9.7 mm
28
NOT SPECIFIED
50 V
7 V
LB1936V-MPB-E
LB1936V-MPB-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2.5-9.5 V, and peak reflow temp of 260 °C. Ideal for stepper motor control applications due to its compact size, low profile design, and bipolar technology ensuring precise motion control.
STEPPER MOTOR CONTROLLER
R-PDSO-G16
16
85 Cel
SSOP16,.25
5
16 mA
9.5 V
2.5 V
LB1936V-TLM-E
LB1936V-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2.5-9.5 V, and peak reflow temp of 260°C. Ideal for stepper motor control applications due to its small outline package and low profile design.
STK554U392A-E
STK554U392A-E by Onsemi is a Motion Control IC with 15V supply, 30A output current, and -40 to 100°C operating temperature range. It's used as an AC motor controller in industrial applications due to its hybrid technology and compact rectangular package design.
R-XSMA-T21
62 mm
21
30 A
ZIP
ZIP21/29,.2,.12FL
5.7 mm
INDUSTRIAL
1.27 mm
SINGLE
21.8 mm
MCP8024-H/PT
Microchip Technology
MCP8024-H/PT by Microchip is a Motion Control IC with 48 terminals, operating from -40 to 150 °C. It's a Brushless DC Motor Controller for automotive applications, supporting supply voltage range of 6-28 V and low current consumption of 0.5 mA.
TS 16949
.5 mA
28 V
13 V
STK672-440BN-E
STK672-440BN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 20A max output current. It is a Stepper Motor Controller in an IN-LINE package style suitable for applications requiring precise motion control in compact spaces.
ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
R-PZIP-T19
29.2 mm
19
20 A
HSZIP
IN-LINE, HEAT SINK/SLUG, SHRINK PITCH
18.2 mm
5.25 V
4.75 V
Matte Tin (Sn) - annealed
1 mm
4.5 mm
STK672-442BN-E
STK672-442BN-E by Onsemi is a Motion Control IC with 19 terminals, operating at 5V. It features a max output current of 20A and uses HYBRID technology. Ideal for STEPPER MOTOR CONTROL applications due to its flange mount package style and zig-zag terminal position.
ALSO OPERATES IN 0 TO 46V SUPPLY
R-XZFM-T19
STK682-010-E
STK682-010-E by Onsemi is a Motion Control IC with 3A max output current, suitable for Stepper Motor Control. It features 19 terminals in an IN-LINE package style, measuring 29.2mm x 4.5mm x 18.2mm (LxWxH). The HYBRID technology and terminal finish of Matte Tin make it ideal for various motion control applications.
ALSO OPERATES WITH THE RANGE OF 9V TO 32V SUPPLY, SEATED HT-CALCULATED
3 A
DRV3203EPHPQ1
Texas Instruments' DRV3203EPHPQ1 is a Motion Control IC with 48 terminals, suitable for automotive applications. It operates at -40 to 150°C, with Vsup ranging from 5.3V to 18V. The IC features a flatpack package style and is AEC-Q100 compliant.
DRV3203EPHPRQ1
DRV3203EPHPRQ1 by Texas Instruments is a Motion Control IC with 48 terminals, suitable for automotive applications. It operates b/w -40 to 150°C and supports supply voltages from 5.3V to 18V. This IC is designed for Brushless DC Motor control, featuring a flatpack package style and AEC-Q100 screening level.
DRV8850RGYT
DRV8850RGYT by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage of 2-5.5V, and max output current of 8A. Ideal for brush DC motor control applications due to its compact chip carrier package and industrial temperature grade suitability.
BRUSH DC MOTOR CONTROLLER
R-PQCC-N24
5.5 mm
2
24
8 A
HVQCCN
LCC24/28,.14X.2,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
4.2
2 V
4.2 V
Nickel/Palladium/Gold (Ni/Pd/Au)
NO LEAD
3.5 mm
TLE42062GXUMA1
Infineon Technologies
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Technology: BIPOLAR;
R-PDSO-G14
8.75 mm
14
1 A
SOP
SMALL OUTLINE
1.75 mm
4 mm
TLE42064GXUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G14;
TLE52052AKSA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BCDMOS; Package Style (Meter): FLANGE MOUNT;
R-PZFM-T7
7
6 A
40 V
13.2 V
BCDMOS
TLE52052GAUMA1
TLE52052GAUMA1 by Infineon is a BCDMOS motion control IC with 7 terminals, capable of handling up to 6A output current. Operating b/w 6V to 40V, it's ideal for brush DC motor control applications due to its compact size and single terminal position.
R-PSSO-G7
10 mm
TO-263
245
9.25 mm
TLE52052GPAUMA1
TLE52052GPAUMA1 by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. Ideal for BRUSH DC MOTOR CONTROL applications due to its 13.2V nominal voltage and compact rectangular package design (15.9mm x 11mm).
15.9 mm
HSOP
SMALL OUTLINE, HEAT SINK/SLUG
11 mm
TLE52052SAKSA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 13.2 V; JESD-609 Code: e3;
R-PSFM-T7
STK681-360-E
STK681-360-E by Onsemi is a Motion Control IC with 24V nominal voltage, 5.8A max output current, and HYBRID technology. It is used as a BRUSH DC MOTOR CONTROLLER in applications requiring precise motion control. The IC features an IN-LINE package style with 19 terminals in ZIG-ZAG position for compact design and efficient heat dissipation.
SEATED HT-CALCULATED
5.8 A
30 V
10 V
24 V
NCV7718BDQR2G
NCV7718BDQR2G by Onsemi is a Motion Control IC with 6 functions, operating at -40 to 125 °C. It has a supply voltage range of 5.5-28 V and output current of 0.55 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package.
ALSO REQUIRE 3.15V TO 5.25V
R-PDSO-G24
8.65 mm
6
.55 A
HSSOP
SSOP24,.25
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
5 mA
CMOS
NICKEL GOLD PALLADIUM
3.9 mm
TMC223-SI
Trinamic Motion Control & Kg
TMC223-SI by Trinamic is a small outline motion control IC for stepper motors. With 20 terminals, it operates b/w -40 to 125 °C and supports up to 0.8A output current. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
12.8 mm
.8 A
2.65 mm
29 V
7.5 mm
AM4961AGHTR-G1
Diodes Incorporated
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
6.45 mm
90 Cel
3.5 V
AM4961AGSTR-G1
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
4.9 mm
SSOP
SMALL OUTLINE, SHRINK PITCH
.635 mm
TLE52062AKSA1
TLE52062AKSA1 by Infineon is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-40V with a max output current of 6A. The package style is flange mount, making it suitable for various motion control applications.
UNDERVOLTAGE LOCKOUT
TLE52062GAUMA1
Infineon's TLE52062GAUMA1 is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-40V with 6A output current, in a small outline package measuring 10x9.25mm. Suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
TLE52062SAKSA1
TLE52062SAKSA1 by Infineon is a BCDMOS Motion Control IC with 6A max output current. It operates at 6-40V, suitable for brush DC motor control applications. This rectangular IC has 7 terminals and a flange mount package style.
TIN
TLE62083GXUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 6.1 V;
6.1 V
TLE62086GXUMA1
TLE62086GXUMA1 by Infineon Technologies is a Motion Control IC for brush DC motor control. It operates at 4.75-5.25 V with a max output current of 2 A. This BCDMOS technology IC comes in a small outline package, measuring 18.1mm x 7.6mm x 2.65mm, with dual terminals and gull wing form factor suitable for surface mount applications.
18.1 mm
2 A
7.6 mm
TLE71851EXUMA1
TLE71851EXUMA1 by Infineon Technologies is a motion control IC with a nominal voltage of 7V. It is a small outline package with 36 terminals and can be used as an AC motor controller. Its compact size (12.8mm length, 7.6mm width) makes it suitable for various applications requiring precise motion control.
R-PDSO-G36
36
32 V
LV8400V-MPB-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
3.8 A
1.6 mA
2.7 V
BICMOS
LV8400V-TLM-E
LV8400V-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2.7-5.5 V, and max output current of 3.8 A. Ideal for BRUSH DC MOTOR CONTROL applications due to its BICMOS technology and compact design (5.2mm x 4.4mm).
NCV7720DQR2G
NCV7720DQR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
8.64 mm
SSOP24,.24
3.15 V
3.3 V
LB1940T-MPB-E
LB1940T-MPB-E by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 1.9-7.5V, and output current of 0.4A. Ideal for stepper motor control applications due to its compact size, low supply current of 7mA, and bipolar technology for precise motion control.
ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY
6.5 mm
.4 A
TSSOP
TSSOP20,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
3,5
7 mA
7.5 V
1.9 V
LV8044LP-MPB-H
LV8044LP-MPB-H by Onsemi is a Motion Control IC with 3.3V supply, 0.6A output current, and BICMOS technology. Ideal for disk drive motor controllers due to its compact square shape, 40 terminals, and low profile chip carrier package style. Operating temperature range from -20 to 85 °C makes it versatile for various applications.
S-XQCC-N40
5 mm
40
.6 A
VQCCN
LCC40,.2SQ,16
CHIP CARRIER, VERY THIN PROFILE
3.3
.85 mm
.4 mm
LV8086T-MPB-E
LV8086T-MPB-E by Onsemi is a Motion Control IC with 24 terminals, operating at -20 to 75 °C. It features a 5V nominal voltage, BICMOS technology, and supports AC motor control applications. The package is small outline, thin profile, with gull wing terminals and a max output current of 2.5A.
2.5 A
Tin/Bismuth (Sn/Bi)
LV8086T-MPB-H
LV8086T-MPB-H by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package, BICMOS technology, and can handle up to 2.5A output current. Ideal for AC motor control applications in commercial settings with temp range -20 to 75 °C.
TSSOP24,.25,20
LV8086T-TLM-E
LV8086T-TLM-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features AC motor control technology, Gull Wing terminal form, and supports up to 2.5A output current. Ideal for applications requiring precise motion control in commercial environments.
LV8086T-TLM-H
LV8086T-TLM-H by Onsemi is a Motion Control IC with 24 terminals, operating at -20 to 75 °C. It features a 5V nominal voltage, BICMOS technology, and supports AC motor control applications. The package is small outline, thin profile, with shrink pitch and gull wing terminal form.
LA6581DMR2G
LA6581DMR2G by Onsemi is a Motion Control IC with 8 terminals, operating voltage range of 2.2V to 16V, and max output current of 0.5A. Ideal for Brushless DC motor control applications due to its compact square package design and temp range from -30 °C to 100°C.
S-PDSO-G8
3 mm
8
.5 A
1.1 mm
2.2 V
LA6595DMR2G
LA6595DMR2G by Onsemi is a Motion Control IC with 8 terminals, operating voltage range of 2.2V to 14V, and max output current of 0.5A. Ideal for Brushless DC Motor control applications due to its compact square package design and temp range from -30 °C to 90°C.
14 V
© 2023 All rights reserved
