Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE52062SAKSA1 by Infineon is a BCDMOS Motion Control IC with 6A max output current. It operates at 6-40V, suitable for brush DC motor control applications. This rectangular IC has 7 terminals and a flange mount package style.
Median Price
$2.069
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Chip Stock
Digiode
Semicontronic
$0.500
$0.488
$0.485
Bastille Electronics
$1.966
$1.867
$1.841
Continental Prestige Electronics
$2.028
Argo Parts USA
Ampacity Inc.
$2.500
Corohmni
$4.064
Modulus Dynamics
$12.323
$11.830
$11.337
Advanced Electronics
$12.679
$12.045
AZTECH Wire
$13.735
Aztec Data Supply Inc.
$14.500
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Robosynatics
$9.410
$9.218
Lucentia Tech
Perfect Parts
A-Z Elektronik GmbH
Corphita
This material provides durability and protection for the internal components of the motion control IC, ensuring long-term reliability.
The high nominal supply voltage allows for efficient power delivery to the connected device, ensuring optimal performance.
Having 7 terminals provides flexibility in connecting the motion control IC to various circuits or devices, making it versatile for different applications.
The TIN terminal finish offers good conductivity and solderability, ensuring secure connections and reliable performance.
BCDMOS technology combines the benefits of bipolar and CMOS technologies, providing high efficiency and performance for the motion control IC.
Motion Control ICs TLE52062SAKSA1 attributes and parameters. Explore more Motion Control ICs devices from Infineon Technologies
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
TLE52062SAKSA1 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
First Components International
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
NXP Semiconductors
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Bkc Semiconductors
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
L6208PD
STMicroelectronics
L6208PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC features a small outline package with a rectangular shape and gull wing terminals for precise stepper motor control.
STSPIN830
STSPIN830 by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage range of 7-45V. It's a Brushless DC Motor Controller in a square chip carrier package suitable for surface mount applications. With a compact size of 4x4mm and low supply current of 3mA, it's ideal for various motion control systems.
FSB50450TB
Fairchild Semiconductor's FSB50450TB is a Motion Control IC with 23 terminals, operating at 12-15V. It features a max output current of 3A and a nominal voltage of 13.5V. This AC Motor Controller has a compact MICROELECTRONIC ASSEMBLY package suitable for various motion control applications.
IRAMS10UP60B
IRAMS10UP60B by Infineon Technologies is a Motion Control IC with 15V supply voltage, 15A output current, and 25 terminals. It is an AC motor controller suitable for automotive applications due to its hybrid technology and wide operating temperature range (-40 to 125°C).
TLE5206-2GP
Siemens
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL; Maximum Output Current: 6 A;
DRV8432DKDR
Texas Instruments' DRV8432DKDR is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at -40 to 85°C, supports a max output current of 15A, and has a nominal voltage of 50V. The package style is small outline with gull wing terminals and measures 15.9mm in length.
A3901SEJTR-T
Allegro MicroSystems
Allegro MicroSystems' A3901SEJTR-T is a Motion Control IC with 3-5V supply, 0.4A output current, and -20 to 85°C operating temperature range. Ideal for stepper motor control applications due to its small outline package and dual terminals design.
DRV8434ERGER
DRV8434ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage and 2.5A max output current. It features a plastic/epoxy package body, operates in automotive temperature grade, and is suitable for brush DC motor control applications. With surface mount capability and quad terminal position, it offers high performance in compact designs.
PDRV8436PPWPR
PDRV8436PPWPR by Texas Instruments is a Motion Control IC with 24V nominal voltage, 1.5A max output current, and -40 to 125°C operating temperature range. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and is designed for brush DC motor control.
IRMCF341TY
International Rectifier
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
LV8968BBUWR2G
LV8968BBUWR2G by Onsemi is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor control. It operates at 8-28V, with a peak reflow temp of 260°C. The package style is flatpack, low profile, and heat sink/slug in a square shape.
TMC2300-LA-T
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 30; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
A4979GLPTR-T
Allegro MicroSystems' A4979GLPTR-T is a Motion Control IC with 3.3V supply, 28 terminals, and -40 to 105°C operating temperature range. Ideal for stepper motor control applications due to its small outline package and industrial-grade temperature rating.
A3992SLPTR-T
Allegro MicroSystems' A3992SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 4.5-5.5V, and output current up to 1.5A. Ideal for stepper motor control applications, this IC has a compact rectangular package suitable for surface mounting in various electronic devices. Operating temperature ranges from -20°C to 85°C, making it versatile for different environments.
TMC2208-LA
TMC2208-LA by Trinamic is a Motion Control IC with 28 terminals, operating voltage of 5.5-36V, and max output current of 2.5A. Ideal for automotive applications due to its temp range -40 to 125°C and compact square package design at only 0.9mm seated height.
MCF8316A1VRGFR
MCF8316A1VRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for applications requiring Brushless DC Motor control in a compact chip carrier package measuring 7mm x 5mm with very thin profile. Operating temperature ranges from -40°C to 125°C make it suitable for various industrial environments.
TMC2660C-PA
TMC2660C-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage range of 5-29V, and max output current of 7A. Ideal for automotive applications due to its temp grade and CMOS technology, it's a stepper motor controller in a square package suitable for surface mount assembly.
LTC1695CS5#TRMPBF
Analog Devices
LTC1695CS5#TRMPBF by Analog Devices is a Motion Control IC with 5V nominal voltage, suitable for Brushless DC Motor Controller applications. It features a small outline package style, matte tin terminal finish, and operates b/w 0°C to 70°C temperature range. Ideal for compact designs requiring precise motion control in commercial-grade environments.
DRV10963PDSNT
DRV10963PDSNT by Texas Instruments is a Motion Control IC with 10 terminals, operating at -40 to 85°C. It supports brushless DC motor control, with a supply voltage range of 2.1V to 5.5V and peak reflow temperature of 260°C. This square-shaped IC in small outline package is ideal for industrial applications requiring precise motion control in compact spaces.
PDRV8243SDGQQ1
PDRV8243SDGQQ1 by Texas Instruments is a Motion Control IC with 28 terminals, supporting a max output current of 12A. Operating b/w -40 to 125°C, it features BICMOS technology and is ideal for BRUSH DC MOTOR CONTROL applications in automotive systems due to its AEC-Q100 screening level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE52062GAUMA1
Infineon's TLE52062GAUMA1 is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-40V with 6A output current, in a small outline package measuring 10x9.25mm. Suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
TLE5206-2GP by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. It operates b/w 0-70°C, suitable for brush DC motor control applications. With a supply voltage range of 6-40V, it's ideal for small outline designs requiring precise motion control.
TLE52052GAUMA1
TLE52052GAUMA1 by Infineon is a BCDMOS motion control IC with 7 terminals, capable of handling up to 6A output current. Operating b/w 6V to 40V, it's ideal for brush DC motor control applications due to its compact size and single terminal position.
TLE52062GPAUMA1
TLE52062GPAUMA1 by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. It is a Brush DC Motor Controller suitable for applications requiring a supply voltage range of 6-40V and compact design with small outline package style.
TLE52062GXT
TLE52062GXT by Infineon is a Motion Control IC for brush DC motors. It operates at 6-40V with 6A output current. The small outline package measures 10x9.25mm, has 7 terminals, and uses BCDMOS technology for surface mount applications.
TLE5206-2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Package Body Material: PLASTIC/EPOXY;
TLE52052GPAUMA1
TLE52052GPAUMA1 by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. Ideal for BRUSH DC MOTOR CONTROL applications due to its 13.2V nominal voltage and compact rectangular package design (15.9mm x 11mm).
TLE5205-2GP
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Qualification: Not Qualified;
TLE5205-2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Package Style (Meter): SMALL OUTLINE;
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
TLE52052GXT
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Supply Voltage (Vsup): 13.2 V;
TLE5206-2S
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 7; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE;
TLE52062AKSA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG; Package Body Material: PLASTIC/EPOXY;
TLE5206-2
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 6 A; No. of Functions: 1;
TLE5205-2S
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT; Maximum Output Current: 6 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved