Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STK57FU391A-E by Onsemi is a Motion Control IC with 25 terminals, operating voltage range of 0-400V. It features a max output current of 40A and terminal finish in Tin Nickel. Ideal for AC motor control applications due to its flange mount package style and zig-zag terminal position.
Median Price
$20.262
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$16.210
1k+ parts
$14.500
10k+ parts
$13.650
DigiKey
$21.330
Verical
$18.125
$17.063
Nova Conductors
$16.370
Digiode
$17.157
Chip Stock
Vyrian
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Ampacity Inc.
$15.350
Corohmni
$16.043
Corphita
$16.254
Continental Prestige Electronics
Netroflash
Vigor
$17.340
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Argo Parts USA
Problanco Electronics
Kulean Microsystems
UHIMA Technologies
Microchip USA
Plastic/epoxy is a durable and lightweight material, making the product sturdy and easy to handle.
Rectangular package shape allows for easy integration into various systems and layouts.
280V supply voltage provides ample power for controlling motion in a wide range of applications.
Having 25 terminals allows for multiple connections and flexibility in system design.
Flange mount package style enables secure and efficient mounting in place.
Tin nickel terminal finish provides good conductivity and corrosion resistance for reliable connections.
Zig-zag terminal position facilitates easy soldering and secure terminal connections.
Being an AC motor controller, this IC is specifically designed for controlling AC motors efficiently.
With a minimum supply voltage of 0V, the IC can be used in a wide range of low power applications.
The capability to deliver a maximum output current of 40A makes this product suitable for high power applications.
Through-hole terminal form allows for easy and secure PCB mounting and soldering.
A maximum supply voltage of 400V enables the IC to handle high voltage applications with ease.
Motion Control ICs STK57FU391A-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
STK57FU391A-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices 28/Apr/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Electronic Transistors
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
SLA7026M
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 18; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 10 V; Terminal Form: THROUGH-HOLE;
TC648VPA
Telcom Semiconductor
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DRV8870DDAR
Texas Instruments
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
DRV8304HRHAR
DRV8304HRHAR by Texas Instruments is a Motion Control IC with 40 terminals, operating temperature range of -40 to 125°C, and supply voltage from 6V to 38V. It is ideal for automotive applications as a Brushless DC Motor Controller in a compact square package suitable for surface mount assembly.
DRV8838DSGR
DRV8838DSGR by Texas Instruments is a motion control IC with a small outline, heat sink package. It operates at a nominal voltage of 3V and can handle a max output current of 1.8A. This IC is commonly used as a brush DC motor controller in industrial applications.
ADS1259QPWRQ1
Texas Instruments ADS1259QPWRQ1 is a Motion Control IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage range of 4.75V to 5.25V and is ideal for automotive applications requiring precise control over brush DC motors.
TMC5130A-TA
Trinamic Motion Control & Kg
TMC5130A-TA by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 5.5V to 46V, and max output current of 2A. Ideal for automotive applications due to its temp grade and compact size (7mm x 7mm). Features include quad terminal position, CMOS technology, and matte tin finish.
TMC2130-LA
TMC2130-LA by Trinamic is a Motion Control IC with 36 terminals, operating b/w -40 to 125°C. It's a Stepper Motor Controller with 3A output current, suitable for automotive applications due to its CMOS technology and low profile design.
FSB50450BS
Onsemi
FSB50450BS by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 150 °C. It has a max output current of 5 A and supports AC motor control applications. The IC is surface mountable, with a rectangular package style and nominal voltage range of 13.5-16.5 V.
IRMCF311TY
Infineon Technologies
Infineon Technologies' IRMCF311TY is a Motion Control IC with 64 terminals, operating voltage range of 1.62V to 1.98V, and temperature grade of INDUSTRIAL. It is designed for BRUSH DC MOTOR CONTROL applications, featuring a low profile FLATPACK package with gull wing terminals suitable for surface mount assembly in industrial environments up to 85°C.
FNA23512A
AC MOTOR CONTROLLER; No. of Terminals: 34; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XDMA-T34; Maximum Output Current: 70 A;
DRV10983QPWPRQ1
Texas Instruments' DRV10983QPWPRQ1 is a Motion Control IC with 24 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, with Vsup ranging from 6.2V to 28V. The package style is small outline, heat sink/slug, and thin profile for automotive applications.
IRSM505-025PA
International Rectifier
AC MOTOR CONTROLLER;
DRV8305NQPHPRQ1
Texas Instruments' DRV8305NQPHPRQ1 is a Motion Control IC with 48 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 1A and support for brushless DC motor control, it's ideal for compact designs requiring precise motion control.
DRV8210DRLR
DRV8210DRLR by Texas Instruments is a Motion Control IC with 6 terminals, operating voltage range of 1.65V to 5.5V, and output current up to 1.76A. It is ideal for brush DC motor control applications due to its small outline package and wide temperature range (-40°C to 125°C).
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
DRV8841PWPR
Texas Instruments' DRV8841PWPR is a Motion Control IC with 28 terminals, supporting supply voltages from 8.2V to 45V. It features a max output current of 2.5A and operates in industrial temperatures (-40°C to 85°C). Ideal for stepper motor control applications, this IC comes in a small outline package with gull wing terminals.
DRV10975ZRHFR
DRV10975ZRHFR by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It is a Brushless DC Motor Controller suitable for automotive applications, with a supply voltage range of 6.5V to 18V and compact dimensions of 5mm x 4mm x 1mm.
A3979SLPTR
Allegro MicroSystems
Allegro MicroSystems A3979SLPTR is a Motion Control IC with 28 terminals, operating voltage of 3-5.5 V, and max output current of 2.5 A. Ideal for stepper motor control applications due to its BCDMOS technology and compact design with small outline package shape. Operating temperature range from -20 to 85 °C ensures reliable performance in various environments.
UC2625N
UC2625N by Texas Instruments is a Motion Control IC with 12V supply voltage, 2A output current, and 30mA supply current. Ideal for industrial applications, it features bipolar technology and nickel palladium gold terminal finish in a rectangular package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STK541UC62K-E
AC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 280 V; Maximum Output Current: 20 A;
STK551U362A-E
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK551U3A2A-E
STK551U3A2A-E by Onsemi is a Motion Control IC with 15V supply, 40A output current, and -40 to 100°C operating temperature range. Ideal for AC motor control applications due to its hybrid technology, industrial-grade temperature rating, and compact rectangular package design.
STK554U392A-E
STK551U392A-E
STK5F1U3C2D-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 37; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
STK554U392C-E
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 21; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 0 V;
STK544UC62K-E
AC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XSFM-T19; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STK57FU394AG-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 280 V;
STK534U362C-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 21; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-609 Code: e3;
STK544UC63K-E
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 0 V;
STK581U3C2D-E
AC MOTOR CONTROLLER; No. of Terminals: 18; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT; No. of Functions: 1;
STK541UC60C-E
AC MOTOR CONTROLLER; No. of Terminals: 18; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 20 A; No. of Functions: 1;
STK534U342C-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 21; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 5.5 mm;
STK554U362A-E
STK531U394A-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 21; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
STK531U369A-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK531U394C-E
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 21; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
STK541UC62A-E
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XSFM-T19;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved