Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
BD7961FM-E2
ROHM
ROHM's BD7961FM-E2 is a Motion Control IC with 44 terminals, BICMOS technology, and 8V nominal voltage. Its small outline package makes it suitable for applications requiring precise motion control in a temperature range of -35 to 85°C.
R-PDSO-G44
44
85 Cel
-35 Cel
PLASTIC/EPOXY
SSOP
SOP44,.4,32
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
8
Not Qualified
Motion Control Electronics
38 mA
8 V
YES
BICMOS
OTHER
GULL WING
.8 mm
DUAL
LV8743V-TLM-E
Onsemi
LV8743V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 85 °C. It has a supply voltage of 5V and max current of 4.5mA. Ideal for applications requiring precise motion control in compact designs.
e6
3
-20 Cel
SSOP44,.3
260
5
4.5 mA
5 V
TIN BISMUTH
.635 mm
30
LB11923V-MPB-E
LB11923V-MPB-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 80 °C. It has a supply voltage of 6.3V and max current of 29.5mA. Ideal for applications requiring precise motion control in commercial extended temperature environments.
80 Cel
6.3
29.5 mA
6.3 V
BIPOLAR
COMMERCIAL EXTENDED
AMIS30421C4211G
AMIS30421C4211G by Onsemi is a Motion Control IC with 44 terminals in a square chip carrier package. It operates b/w -40 to 125 °C, suitable for automotive applications. Features include stepper motor control, 6-30V supply voltage range, and compact dimensions of 7x7mm.
STEPPER MOTOR CONTROLLER
S-XQCC-N44
7 mm
1
125 Cel
-40 Cel
UNSPECIFIED
HVQCCN
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
NOT SPECIFIED
.9 mm
30 V
6 V
AUTOMOTIVE
NO LEAD
.5 mm
QUAD
TMC246A-PA
Trinamic Motion Control & Kg
TMC246A-PA by Trinamic: Motion Control IC for stepper motors. Nominal Vsup 3.3V, Max Isup 1.35mA, Max Output Current 7A. Ideal for automotive applications due to -40 to 125 °C operating temp range and HVCMOS technology.
ALSO REQUIRED BRIDGE SUPPLY VOLTAGE OF 7V TO 28.5V OR 7V TO 34V
S-PQFP-G44
e3
10 mm
7 A
LQFP
QFP44,.47SQ,32
FLATPACK, LOW PROFILE
3.3/5,7/34
1.6 mm
1.35 mA
5.5 V
3 V
3.3 V
HVCMOS
MATTE TIN
LV8702V-MPB-H
LV8702V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 3A output current, and BCDMOS technology. Ideal for stepper motor control applications in industrial settings due to its compact size, low profile design, and wide operating temperature range from -40 to 85 °C.
15 mm
3 A
HLSSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
24
1.7 mm
6.5 mA
32 V
9 V
24 V
BCDMOS
INDUSTRIAL
.65 mm
5.6 mm
LV8702V-TLM-H
LV8702V-TLM-H by Onsemi is a Motion Control IC with 24V nominal voltage, 3A max output current, and BCDMOS technology. Ideal for industrial applications requiring precise stepper motor control in a compact rectangular package.
LV8731V-MPB-H
LV8731V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, low profile design, and dual terminal position. Operating temperature ranges from -20 °C to 85°C making it suitable for various industrial environments.
2.5 A
5 mA
LV8731V-TLM-H
LV8731V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and low profile design. Operating temperature range from -20 °C to 85°C makes it versatile for various industrial uses.
LV8732V-MPB-H
LV8732V-MPB-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and peak reflow temperature of 260 °C.
LV8734V-MPB-H
LV8734V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It has a supply voltage range of 9-32 V and output current up to 1.75 A, suitable for industrial stepper motor control applications. The package is small outline, low profile, with gull wing terminals and BCDMOS technology.
1.75 A
LV8741V-TLM-E
LV8741V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 85 °C. It features a max output current of 1.75A and BICMOS technology for stepper motor control applications. The package style is small outline, low profile, with a shrink pitch design suitable for surface mount assembly.
ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY
2.7 V
DRV8332HDDV
Texas Instruments
DRV8332HDDV by Texas Instruments is a Motion Control IC with 44 terminals, operating voltage range of 10.8-50V, and max output current of 13A. Ideal for BRUSH DC MOTOR CONTROL applications, it features a MILITARY-grade temp rating and GULL WING terminal form for high reliability in harsh environments.
BRUSH DC MOTOR CONTROLLER
e4
14 mm
175 Cel
-55 Cel
13 A
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.2 mm
15 mA
52.5 V
10.8 V
50 V
MILITARY
NICKEL PALLADIUM GOLD
6.1 mm
LB11899J-MPB-E
LB11899J-MPB-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 75 °C. It has a supply voltage range of 4-6V and can handle up to 1.1A output current. Ideal for Disk Drive Motor Controllers due to its small outline package and low profile design.
DISK DRIVE MOTOR CONTROLLER
75 Cel
1.1 A
5,12
25 mA
4 V
LV8104V-MPB-H
LV8104V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 80 °C. It supports a supply voltage range of 16-28V and output current up to 0.015A. Ideal for Brushless DC Motor control applications due to its BICMOS technology and compact design.
BRUSHLESS DC MOTOR CONTROLLER
.015 A
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
8.2 mA
28 V
16 V
LV8104V-TLM-H
LV8104V-TLM-H by Onsemi is a Motion Control IC with 24V supply, 44 terminals, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -20 to 80 °C and has a compact rectangular package design for surface mount applications.
LV8111V-TLM-H
LV8111V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 3A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -25 to 80 °C and has a small outline package with dual terminals.
-25 Cel
35 V
10 V
LV8112V-MPB-H
LV8112V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 3A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -25 to 80 °C with a small outline package and dual terminal position.
LV8121V-TLM-H
LV8121V-TLM-H by Onsemi is a Motion Control IC with 24V supply, 3.5A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -30 to 100 °C and has a compact rectangular package with 44 terminals for surface mounting applications.
100 Cel
-30 Cel
3.5 A
4.7 mA
A3936SED
Allegro MicroSystems
A3936SED by Allegro MicroSystems is a motion control IC with a square package and 44 terminals. It operates at a nominal voltage of 5V and has a max output current of 3A. This IC is commonly used as a brushless DC motor controller.
S-PQCC-J44
e0
16.585 mm
QCCJ
LDCC44,.7SQ
CHIP CARRIER
4.57 mm
10 mA
NMOS
TIN LEAD
J BEND
1.27 mm
A3977SEDTR
Allegro MicroSystems A3977SEDTR is a Motion Control IC with 2.5A max output current, suitable for stepper motor control. Operates at -20 to 85°C, with supply voltage range of 3-5.5V. Features NMOS technology in a square chip carrier package for surface mount applications.
240
3.3/5,35
Tin/Lead (Sn/Pb)
A3977SED
Allegro MicroSystems' A3977SED is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for stepper motor control applications due to its NMOS technology and compact chip carrier package style.
A3977KED
Allegro MicroSystems' A3977KED is a Motion Control IC in PLASTIC/EPOXY package with 44 terminals. It operates at -40 to 125 °C, suitable for automotive applications. Features include 2.5A output current, NMOS technology, and compatibility with stepper motor control systems.
A3977KEDTR
Allegro MicroSystems' A3977KEDTR is a Motion Control IC in PLASTIC/EPOXY package with 44 terminals. It operates at -40 to 125 °C and supports 3-5.5 V supply voltage range. Ideal for automotive applications, it's a Stepper Motor Controller with NMOS technology and can handle up to 2.5A output current.
UDN2916EBTR
Allegro MicroSystems' UDN2916EBTR is a Motion Control IC with 44 terminals, operating at 5V. It features a max output current of 1A and operates b/w -20 to 85°C. Ideal for stepper motor control applications due to its bipolar technology and compact chip carrier package style.
ALSO REQUIRES 10V TO 45V VBB SUPPLY
16.5862 mm
1 A
50 mA
5.25 V
4.75 V
A3936SED-T
Allegro MicroSystems' A3936SED-T is a Motion Control IC in a rectangular chip carrier package with 44 terminals. It operates at 5V, supports a max output current of 3A, and is designed for brushless DC motor control applications. With a temperature range of -20 to 85°C, it offers precise control for various motion systems.
ALSO REQUIRES 9V TO 50V VBB SUPPLY
R-PQCC-J44
16.59 mm
Matte Tin (Sn)
40
A3977SED-T
Allegro MicroSystems' A3977SED-T is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and output current up to 2.5A. Ideal for stepper motor control applications, it features NMOS technology, quad terminal position, and matte tin finish for reliable performance in a compact chip carrier package.
A3977SEDTR-T
Allegro MicroSystems' A3977SEDTR-T is a Motion Control IC with 44 terminals and 2.5A max output current. Operating b/w -20 to 85°C, it supports supply voltages of 3-5.5V for stepper motor control applications in compact square chip carrier package.
ALSO REQUIRES A 8V TO 35V SUPPLY
A3977KEDTR-T
Allegro MicroSystems' A3977KEDTR-T is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for automotive applications, this NMOS technology-based chip carrier package offers precise stepper motor control at temperatures ranging from -40 to 125°C.
A3936SEDTR-T
Allegro MicroSystems' A3936SEDTR-T is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and output current up to 3A. Ideal for Brushless DC Motor control applications, it features NMOS technology, matte tin finish, and operates b/w -20 to 85°C.
UDN2916EB-T
Allegro MicroSystems' UDN2916EB-T is a Motion Control IC with 44 terminals, operating at 5V. Ideal for stepper motor control applications, it offers a max output current of 1A and operates b/w -20 to 85°C temperature range.
UDN2916EBTR-T
Allegro MicroSystems' UDN2916EBTR-T is a Motion Control IC with 44 terminals, operating voltage of 5V, and max output current of 1A. Ideal for stepper motor control applications, this bipolar technology chip carrier has a temperature range from -20 to 85°C and quad terminal position.
LV8111VB-AH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8112VB-AH
LV8112VB-AH by Onsemi is a Motion Control IC with 24V supply voltage, 3A output current, and BICMOS technology. Ideal for Brushless DC motor control applications, it features a small outline package with dual terminals and operates b/w -25 to 80 °C temperature range.
TMC2660-PA
TMC2660-PA by Trinamic: 24V nominal supply, 7A max output current, -40 to 125°C temp range. Ideal for automotive applications as a stepper motor controller in a flatpack, low profile package.
29 V
TMC261-PA
TMC261-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage range of 9-24V. Ideal for automotive applications, it offers a max output current of 7A and operates in temperatures from -40 to 125°C.
59 V
CMOS
HCTL-1101-PLC
Broadcom
Broadcom's HCTL-1101-PLC is a Motion Control IC with 44 terminals, operating at 5V. It features a CMOS technology, suitable for stepper motor control applications. The chip carrier package style and compact dimensions make it ideal for space-constrained environments.
LG-MAX; WD-MAX
17.65 mm
30 mA
16.66 mm
DRV8962DDWR
DRV8962DDWR by Texas Instruments is a Motion Control IC with 44 terminals, operating voltage range of 4.5V to 65V, and max output current of 5A. Ideal for brush DC motor control applications, it features a small outline package with nickel palladium gold terminal finish and can operate in temperatures ranging from -40°C to 125°C.
5 A
TSSOP44,.32
9 mA
65 V
4.5 V
© 2023 All rights reserved
