Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TISP4180H3LM by Texas Instruments is a single silicon surge protector with 60A peak current, 145V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Parana Technologies
$3.747
$4.245
DigiPath Technology Company
$4.126
ChromeModa Solutions
$4.210
$3.452
IDEA Electronic Components Group
$3.789
AZTECH Wire
$7.906
One Stop Electronics
$25.100
Component Stockers USA
$99.990
Authorized Procurement Solutions
Corphita
The use of plastic/epoxy material makes the surge protector lightweight and durable, suitable for various applications.
The single configuration makes it easy to install and replace if needed, simplifying maintenance.
With a high non repetitive peak on-state current rating of 60A, this surge protector can handle power surges effectively, providing reliable protection to connected devices.
The round package shape allows for easy installation in various equipment and systems.
The through-hole terminal form ensures secure connections and easy mounting on circuit boards.
Having two terminals simplifies the wiring process and ensures proper connection for effective surge protection.
The cylindrical package style is compact and space-saving, making it suitable for applications with limited space availability.
The maximum DC off-state voltage of 145V offers reliable protection against voltage spikes and surges, safeguarding connected equipment.
With a high maximum operating temperature of 150°C, this surge protector can withstand harsh environmental conditions and extended use without overheating.
The use of a thyristor surge protector as the trigger device ensures fast and effective response to surge events, offering enhanced protection to connected devices.
The surge protector can operate at temperatures as low as -40°C, making it suitable for use in extreme cold environments without compromising performance.
The terminal position at the bottom facilitates easy installation and connection, ensuring a secure and reliable electrical connection.
With a maximum holding current of 600mA, this surge protector can effectively clamp transient surges and maintain protection levels for connected devices.
The maximum breakdown voltage of 180V provides a safety margin for handling high voltage transients and surges, protecting connected equipment from damage.
Silicon Surge Protectors TISP4180H3LM attributes and parameters. Explore more Silicon Surge Protectors devices from Texas Instruments
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TISP4180H3LM Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Diotec Semiconductor Ag
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
TISP4290H3BJ
TISP4290H3BJ by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 290V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
SP721ABG
Littelfuse
SP721ABG by Littelfuse is a silicon surge protector with 12 elements and 8 terminals. It features a complex configuration, matte tin terminal finish, and UL recognized reference standard. Ideal for surface mount applications requiring protection against voltage surges up to 260°C peak reflow temperature.
TISP4095M3LMFR
TISP4095M3LMFR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 95V. Ideal for applications requiring thyristor surge protection in UL-recognized systems.
SEP0640Q38CB
SEP0640Q38CB by Littelfuse is a single silicon surge protector with 8V max on-state voltage and 30A non-repetitive peak current. Ideal for applications requiring protection against surges, it operates b/w -40 to 150°C, complies with IEC-61000-4-5 standards, and features a chip carrier package style.
NP1500SBT3G
NP1500SBT3G by Onsemi is a silicon surge protector with a max breakdown voltage of 180V and max operating temperature of 150 °C. It features a thyristor surge protector configuration in a small outline package, suitable for applications requiring protection against voltage surges in electronic circuits.
NTVB058NSB-L
NTVB058NSB-L by Onsemi is a silicon surge protector with a max breakdown voltage of 77V. It has a trigger device type of SILICON SURGE PROTECTOR and operates b/w -40 °C to 150°C. Ideal for applications requiring protection against electrical surges in compact spaces.
TISP4125F3D
TISP4125F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 100V max voltage, and 150°C operating temp. Ideal for protecting circuits in electronics from voltage spikes. Surface mountable with UL recognition, it has dual terminals and Gull Wing form factor.
TISP4400M3LMFR
TISP4400M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 400V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP3290L
TISP3290L by Texas Instruments is a Silicon Surge Protector with 10A Non Repetitive Peak On-state Current and 290V Max Breakdown Voltage. It features SERIES CONNECTED, CENTER TAP configuration for surge protection applications. The device has PLASTIC/EPOXY package body material and RECTANGULAR shape suitable for THROUGH-HOLE mounting.
TISP4070M3LP
TISP4070M3LP by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current and 70V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
TISP7320F3SL
TISP7320F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 7.1A and a max DC off-state voltage of 240V. This thyristor surge protector is ideal for applications requiring UL recognized protection against electrical surges.
NP0640SCMCT3G
NP0640SCMCT3G by Onsemi is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max DC off-state voltage of 58V and operates b/w -40 to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
TISP4165M3LMR
TISP4165M3LMR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 165V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
NTVB200SB-L
NTVB200SB-L by Onsemi is a single silicon surge protector with a max breakdown voltage of 320V. It has a small outline package style and operates b/w -40 °C to 150°C. Ideal for surface mount applications in protecting electronic devices from voltage surges.
NTVB300SB-L
NTVB300SB-L by Onsemi is a single silicon surge protector with a max breakdown voltage of 400V. It has a trigger device type and operates b/w -40 °C to 150°C. Ideal for surface mount applications in protecting electronic devices from voltage surges.
TISP4030H1BJ
TISP4030H1BJ by Texas Instruments is a silicon surge protector with 50A non-repetitive peak on-state current and 15V max DC off-state voltage. It is a surface-mount device in a small outline package, suitable for protecting electronic circuits from voltage surges in various applications.
NTVB065NSA-L
NTVB065NSA-L by Onsemi is a silicon surge protector with a max breakdown voltage of 88V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against surges. With surface mount capability and dual terminals, it offers reliable performance in a small outline package.
TPA120RL
STMicroelectronics TPA120RL is a single silicon surge protector with 30A non-repetitive peak on-state current and 120V repetitive peak reverse voltage. It has a plastic/epoxy package body, wire terminal form, and matte tin finish. Ideal for applications requiring isolated case connection in temperatures ranging from -55 °C to 150°C.
ETP01-2821RL
STMicroelectronics ETP01-2821RL is a Silicon Surge Protector with 36V breakdown voltage, 30mA holding current, and -55 to 150°C operating temperature range. It's surface-mountable and ideal for protecting electronic circuits from voltage spikes in various applications.
TISP7082F3DR
TISP7082F3DR by Texas Instruments is a 3-element surge protector with 3A peak current, 66V DC off-state voltage, and 82V breakdown voltage. It is a thyristor surge protector in a small outline package, suitable for protecting electronic circuits from voltage spikes in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TISP4240M3BJR-S
Bourns
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
TISP4400T3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP4P020L1NR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
TISP4015L1AJR-S
Bourns TISP4015L1AJR-S is a single silicon surge protector with 22A peak current, ideal for surface mount applications. Featuring 8V DC off-state voltage and 15V breakdown voltage, it offers protection against transient surges. With UL recognition, this thyristor surge protector in a small outline package is suitable for various electronic devices.
TISP4070M3AJR-S
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
TISP4070M3AJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4070M3BJR-S
Bourns TISP4070M3BJR-S is a single silicon surge protector with 32A peak current, ideal for protecting circuits. With a max breakdown voltage of 70V and operating temperature range from -40 to 150°C, it ensures reliable performance. This surface-mount device in small outline package suits various applications requiring transient voltage suppression.
TISP4015L1BJR-S
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
TISP4070H3BJR-S
Bourns TISP4070H3BJR-S is a single silicon surge protector with 60A peak current, 58V max voltage, and -40 to 150°C operating range. Ideal for protecting circuits from transient overvoltage events in various applications.
TISP4040H1BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
TISP4082F3SL
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Breakdown Voltage: 82 V;
TISP4250J3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
TISP4265M3BJR-S
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
TISP4395J3BJR-S
TISP4350H3BJR-S
TISP2082F3D
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: DELTA CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 82 V;
TISP1082F3P
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved