Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN;
Median Price
$0.151
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Flip Electronics (Authorized)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Rochester
$0.125
$0.112
DigiKey
$0.190
Verical
$0.140
Digiode
$0.124
Flip Electronics
Chip Stock
Vyrian
Bristol Electronics
Dan-Mar Components
Corohmni
$0.104
Corphita
$0.117
Native Components
$1.360
Northwest PG Solutions
$1.496
Advanced Electronics
$4.496
$4.091
$3.687
AZTECH Wire
$6.610
$6.350
$6.220
$6.100
Continental Prestige Electronics
$0.108
TANS Electronics
Perfect Parts
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
Silicon Surge Protectors HBL5006XV2T1G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
HBL5006XV2T1G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
PCN Design/Specification - Cancellation 06/Aug/2021 Multi Devices 15/Jun/2017
PCN Packaging - Mult Dev Taping Chg 12/Sep/2019 SOD523 Carrier Tape Chg 8/Sep/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMP50-100
SMP50-100 by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 16 A, a max breakdown voltage of 133 V, and operates in temperatures from -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP3380F3DR
Texas Instruments
TISP3380F3DR by Texas Instruments is a Silicon Surge Protector with 2 series-connected elements. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 380V. Ideal for protecting electronic devices from surges, it operates b/w 0-70°C and is UL recognized.
TISP4072F3D
TISP4072F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 58V DC voltage, and 150°C max temp. Ideal for protecting circuits in electronics from voltage spikes. Suitable for surface mount applications due to its gull wing terminals and UL recognized standards compliance.
TISP4180M3LM
TISP4180M3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 180V. Ideal for applications requiring reliable overvoltage protection such as telecommunications and industrial equipment.
TISP4125M3LMR
TISP4125M3LMR by Texas Instruments is a single thyristor surge protector with 32A peak current, 125V breakdown voltage, and 150°C max operating temp. Ideal for protecting electronic devices from power surges in various applications.
TISP4080M3LPR
TISP4080M3LPR by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak current. Its cylindrical package contains a thyristor surge protector with 80V breakdown voltage, ideal for protecting electronic devices from power surges.
TISP4082F3LMR
TISP4082F3LMR by Texas Instruments is a single silicon surge protector with 4A peak current and 82V breakdown voltage. Ideal for protecting circuits from surges, it operates b/w -40°C to 150°C. Its cylindrical package with through-hole terminals makes it suitable for various applications in electronics.
TISP1082F3D
TISP1082F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 66V Max DC Off-state Voltage, and 150°C Max Operating Temperature. It is ideal for protecting electronic circuits from voltage surges in various applications such as telecommunications and industrial equipment.
TISP83121DR
TISP83121DR by Texas Instruments is a Silicon Surge Protector with 200mA DC Gate Trigger Current, 22A Non Repetitive Peak On-state Current, and 1.8V Max DC Gate Trigger Voltage. It is used for surge protection in applications requiring high current handling capabilities and surface mount compatibility.
TISP4260F3LMR
TISP4260F3LMR by Texas Instruments is a single silicon surge protector with 4A peak current, 200V DC off-state voltage, and 260V breakdown voltage. It is a thyristor surge protector used for protecting electronic devices from power surges in applications requiring reliable overvoltage protection.
TISP4070M3LPR
TISP4070M3LPR by Texas Instruments is a single thyristor surge protector with 30A non-repetitive peak on-state current and 70V max breakdown voltage. It features a plastic/epoxy package body, wire terminal form, and cylindrical package style. Ideal for protecting electronic devices from power surges in various applications.
SEP0080Q38CB
Littelfuse
SEP0080Q38CB by Littelfuse is a single silicon surge protector with 8V max on-state voltage and 30A non-repetitive peak current. Ideal for protecting electronic devices from surges, it operates b/w -40 to 150°C, complies with IEC-61000-4-5 standards, and features a chip carrier package style.
TISP4395M3LM
TISP4395M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 395V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP4095H3LMR
TISP4095H3LMR by Texas Instruments is a single silicon surge protector with 60A peak current and 75V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with an operating temperature range of -40°C to 150°C.
SMP100-120
SMP100-120 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak current and 110V repetitive reverse voltage. It is a single configuration device in a small outline package, suitable for surface mount applications to protect against surges up to 160V.
TISP4265H3LPR
TISP4265H3LPR by Texas Instruments is a single thyristor surge protector with 60A non-repetitive peak on-state current and 265V max breakdown voltage. It features a plastic/epoxy package body, wire terminal form, and cylindrical package style. Ideal for protecting electronic devices from power surges in various applications.
MMT10B310T3
The Onsemi MMT10B310T3 is a single silicon surge protector with 270V DC off-state voltage and 175 °C max operating temp. It features a thyristor surge protector configuration, suitable for UL-recognized applications requiring protection against voltage spikes in small outline packages.
TISP1082L
TISP1082L by Texas Instruments is a Silicon Surge Protector with 10A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 82V Max Breakdown Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4072F3SL
TISP4072F3SL by Texas Instruments is a single silicon surge protector with 6A peak current, 58V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications requiring UL recognized surge protection.
TISP4290H3LM
TISP4290H3LM by Texas Instruments is a single silicon surge protector with 60A peak current, 220V DC voltage, and 150°C max operating temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HBL5006HT1G
SILICON SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
HBL5006P2T5G
SILICON SURGE PROTECTOR; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
HBL5006XV2T5G
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved