Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CSD22204WT by Texas Instruments is a P-CHANNEL FET for SWITCHING applications. Features include 8V DS Breakdown Voltage, 80A IDM, and 0.014 ohm RDS(on). With a SQUARE package shape and ENHANCEMENT MODE operation, it offers reliable performance in various electronic devices.
Median Price
$1.394
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.019
100+ parts
$0.692
1k+ parts
$0.355
10k+ parts
-
DigiKey
$1.770
$0.755
$0.565
$0.446
Mouser Electronics
$0.657
$0.510
$0.508
Arrow
$0.426
$0.422
Vyrian
Digiode
$0.968
Ampacity Inc.
$0.362
Semicontronic
$0.353
$0.351
Parana Technologies
$0.415
$1.595
Corohmni
DigiPath Technology Company
$0.457
$0.420
ChromeModa Solutions
$0.466
$0.382
IDEA Electronic Components Group
$0.419
Corphita
$0.917
Native Components
$12.500
Northwest PG Solutions
$13.750
$12.375
P-CHANNEL transistors are known for their low on-state resistance and high efficiency, making them a good choice for power management applications.
The built-in diode and resistor simplify the circuit design and save space on the PCB, making it a convenient option for compact electronic devices.
Switching applications require fast and efficient operation, which this FET is designed to deliver.
Surface mount technology allows for easy and efficient assembly of electronic devices, making this FET suitable for automated production processes.
The minimum breakdown voltage ensures reliable operation and protection against voltage spikes, making this FET suitable for a wide range of applications.
The square package shape offers a compact footprint and efficient use of space on the PCB.
The high pulsed drain current rating allows this FET to handle high power applications with ease.
The 9 terminals provide flexibility in circuit connections and options for various application requirements.
Enhancement mode operation enables precise control over the FET's switching behavior, ensuring optimal performance in various applications.
The high operating temperature range allows this FET to be used in a wide range of environments and applications without compromising performance.
Silicon transistors are known for their high performance, reliability, and durability, making this FET a reliable choice for electronic applications.
The low on-resistance ensures efficient power management and minimal heat dissipation, making this FET suitable for high-performance applications.
The low feedback capacitance minimizes signal distortion and improves performance in high-frequency applications
Power Field Effect Transistors (FET) CSD22204WT attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Texas Instruments
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
CSD22204WT Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
IRF530A
Samsung
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: .11 ohm;
FDB3632
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 310 W; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30;
NDS355AN-NB9L007A
NDS355AN-NB9L007A by Fairchild Semiconductor is an N-CHANNEL power FET with a max drain current of 1.7A and a max power dissipation of 0.5W. It is suitable for applications requiring enhancement mode operation, such as power management systems or motor control circuits.
NTF3055L108T1G
NTF3055L108T1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 9A IDM, and 0.12 ohm RDS(on). Ideal for switching applications, it features an N-CHANNEL configuration in a PLASTIC/EPOXY package with GULL WING terminals. Operating in enhancement mode, it has a max power dissipation of 2.1W and can withstand temperatures up to 175°C.
NTD3055-094T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
IRFL9014TRPBF
Vishay Intertechnology
Vishay Intertechnology's IRFL9014TRPBF is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 14A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has a max power dissipation of 3.1W.
IXTA96P085T
IXYS Corporation
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 298 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
IRFL9014PBF
Vishay Intertechnology's IRFL9014PBF is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 14A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -55 to 150 °C, it has 0.5 ohm Drain-Source On Resistance and 3.1W Max Power Dissipation.
BSP613PH6327XTSA1
BSP613PH6327XTSA1 by Infineon Technologies is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 11.6A and 0.13 ohm Drain-Source On Resistance, suitable for ENHANCEMENT MODE operation in automotive systems (AEC-Q101).
AUIRF7759L2TR
AUIRF7759L2TR by Infineon is a N-CHANNEL FET with 75V DS Breakdown Voltage and 640A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0023 ohm On Resistance, and operates in ENHANCEMENT MODE.
SIS413DN-T1-GE3
Vishay Intertechnology's SIS413DN-T1-GE3 is a P-channel FET with 30V DS breakdown voltage, ideal for switching applications. Features include 70A max pulsed drain current, 0.0094 ohm max RDS(on), and 20mJ avalanche energy rating. Suitable for enhancement mode operation in small outline packages with drain case connection.
FDML7610S
The Onsemi FDML7610S is an N-CHANNEL Power FET with 2 SERIES elements and built-in diode. It has a Max Drain Current of 60A, Min DS Breakdown Voltage of 30V, and Max Pulsed Drain Current of 40A. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 2.2W at a temperature up to 150°C.
IRFZ44NPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 94 W; JESD-30 Code: R-PSFM-T3; Qualification: Not Qualified;
SQJ459EP-T1_GE3
The Vishay Intertechnology SQJ459EP-T1_GE3 is a P-CHANNEL FET with 60V DS breakdown voltage and 200A IDM. Ideal for power applications, it features a built-in diode, 0.018 ohm RDS(on), and 80mJ EAS rating. Suitable for enhancement mode operation in various electronic systems requiring high current handling capabilities.
BSP317PH6327XTSA1
BSP317PH6327XTSA1 by Infineon is a P-CHANNEL FET with 250V DS breakdown voltage. It features a single configuration with built-in diode, suitable for enhancement mode operation. This MOSFET has 1.72A max pulsed drain current and is ideal for automotive applications meeting AEC-Q101 standards.
IRF540STRLPBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-263AB; Operating Mode: ENHANCEMENT MODE; Maximum Pulsed Drain Current (IDM): 110 A;
IRF540ZPBF
Infineon's IRF540ZPBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 140A IDM and 0.0265 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with DRAIN connection and built-in DIODE makes it suitable for high-power circuits.
IRF7493TRPBF
Infineon's IRF7493TRPBF is a N-CHANNEL FET with 80V DS Breakdown Voltage and 74A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.015 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, this MOSFET has a max power dissipation of 2.5W at 150°C.
JANTX2N6796U
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Maximum Turn On Time (ton): 105 ns; Maximum Power Dissipation Ambient: 25 W;
FDD4243-F085
FDD4243-F085 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 24A, 0.044 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and operating temperature range from -55 to 175 °C, it meets AEC-Q101 standards for automotive use.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CSD25402Q3AT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Terminals: 5; JESD-609 Code: e3;
CSD25402Q3A
CSD25402Q3A by Texas Instruments is a P-CHANNEL FET for SWITCHING applications. It features 20V DS Breakdown Voltage, 148A IDM, and 0.0159 ohm Drain-Source On Resistance. With a small outline package style and -55 to 150 °C operating temperature range, it's ideal for high-power switching circuits.
CSD25404Q3T
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Feedback Capacitance (Crss): 68 pF; Terminal Form: NO LEAD; Minimum DS Breakdown Voltage: 20 V;
CSD25404Q3
CSD25404Q3 by Texas Instruments is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 240A IDM, and 0.0121 ohm Drain-Source On Resistance. With an operating temperature range of -55 to 150 °C, it is ideal for high-power switching circuits in various electronic devices.
CSD25310Q2
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 20 V; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
CSD25310Q2T
CSD25310Q2T by Texas Instruments is a P-CHANNEL FET for SWITCHING applications. It features 20V DS Breakdown Voltage, 48A IDM, and 0.089 ohm RDS(on). With ENHANCEMENT MODE operation and METAL-OXIDE SEMICONDUCTOR technology, it offers reliable performance in various electronic systems.
CSD23280F3T
CSD23280F3T by Texas Instruments is a P-CHANNEL FET with 12V DS Breakdown Voltage, 11.4A IDM, and 0.25 ohm RDS(on). Ideal for SWITCHING applications, it operates b/w -55 to 150 °C with ENHANCEMENT MODE and built-in DIODE & RESISTOR.
CSD23285F5T
CSD23285F5T by Texas Instruments is a P-CHANNEL FET for switching applications. It features a 12V DS breakdown voltage, 31A pulsed drain current, and 0.13 ohm max on-resistance. Ideal for enhancement mode operation in surface mount designs with a chip carrier package style.
CSD22206WT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; JESD-609 Code: e1; Package Shape: SQUARE; Maximum Operating Temperature: 150 Cel;
CSD25485F5T
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Time At Peak Reflow Temperature (s): 30;
CSD22206W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Drain Current (ID): 5 A; Maximum Feedback Capacitance (Crss): 440 pF; Terminal Position: BOTTOM;
CSD23285F5
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Minimum DS Breakdown Voltage: 12 V; Terminal Position: BOTTOM; Maximum Feedback Capacitance (Crss): 48 pF;
CSD22205L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; No. of Terminals: 4; Package Shape: SQUARE; Transistor Application: SWITCHING;
CSD23280F3
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; JESD-609 Code: e4; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
CSD25401Q3
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.8 W; Transistor Application: SWITCHING; Peak Reflow Temperature (C): 260;
CSD22204W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: SQUARE; JESD-609 Code: e1;
CSD22205LT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Pulsed Drain Current (IDM): 71 A; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 8 V;
CSD22202W15
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; JESD-609 Code: e1; Maximum Operating Temperature: 150 Cel;
CSD25201W15
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Package Style (Meter): GRID ARRAY; Maximum Drain Current (Abs) (ID): 4 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved