Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TS932IN by STMicroelectronics is a dual operational amplifier with a low input offset voltage of 10 mV and operates on a supply voltage of 3-12 V. It features an impressive common mode reject ratio of 85 dB, making it ideal for industrial applications. With a max operating temp of 85 °C, it's suitable for demanding environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
IDEA Electronic Components Group
$1.155
$1.039
AZTECH Wire
$1.490
$1.430
$1.400
$1.370
MKK Technologies
$2.171
DigiPath Technology Company
Microchip USA
$4.022
A-Z Elektronik GmbH
Corphita
Parana Technologies
$1.380
The use of durable plastic/epoxy makes this Op Amp robust and suitable for various applications, ensuring longevity and reliability.
A maximum input offset voltage of 10000 uV reflects high precision, making this Op Amp ideal for applications requiring accurate signal processing.
With a very low average bias current, this Op Amp is energy-efficient and suitable for battery-operated devices.
Having two functions increases versatility, allowing for a broader range of applications while saving board space.
The rectangular package shape facilitates easier PCB layout and integration into various designs.
An 85 dB common mode reject ratio ensures that the Op Amp effectively cancels out noise, promoting signal integrity.
The nominal supply voltage of 3V makes this Op Amp compatible with low-voltage applications, promoting energy efficiency.
Support for both 3V and 5V power supplies offers flexibility in various circuit designs.
With 8 terminals, this Op Amp provides sufficient connectivity options for various applications without complexity.
The in-line package style is advantageous for easy handling and mounting in tight spaces on PCBs.
A maximum supply voltage limit of 12V enables a wide operational range, accommodating different design constraints.
With a high maximum operating temperature, this Op Amp is suitable for industrial applications where conditions can be extreme.
Maintaining low bias current enhances performance in sensitive applications, contributing to energy conservation.
Frequency compensation ensures stability across a range of frequencies, making this Op Amp reliable for diverse signal processing tasks.
A minimum operating temperature of -40 °C makes this device suitable for harsh environments, enhancing its application range.
A matte tin finish ensures good solderability and corrosion resistance, prolonging the life of the component.
The dual terminal position aids in low-profile designs and efficient board layout, improving performance.
A low seated height allows for more compact designs, advantageous in space-constrained applications.
A width of 7.62 mm strikes a balance between size and performance, making it suitable for various applications.
Being classified as micropower means this Op Amp consumes minimal power, making it excellent for portable and energy-sensitive applications.
Rated for industrial temperature ranges, this Op Amp is rugged and suitable for demanding environments.
Low-bias operation ensures high accuracy and better performance in sensitive applications.
A nominal unity gain bandwidth of 100 kHz provides good speed, suitable for audio and signal processing applications.
Utilizing BICMOS technology offers advantages in terms of both speed and power efficiency, making this Op Amp highly effective.
Through-hole terminal form enhances mechanical strength and is easy to solder, facilitating reliable connections.
As an operational amplifier, it offers a wide range of functionalities essential for amplifying and processing signals.
A low maximum supply current of 0.066 mA enhances the device's efficiency, especially in battery-operated applications.
Voltage-feedback architecture is ideal for general-purpose applications, ensuring high performance and versatility.
Packed in tubes, this Op Amp is protected during transportation, ensuring components remain intact until use.
A nominal slew rate of 0.5 V/μs enables the Op Amp to handle moderate signal changes efficiently, suitable for various applications.
A terminal pitch of 2.54 mm facilitates easier placement on breadboards and PCBs, enhancing user experience.
Operational Amplifiers (Op Amps) TS932IN attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from STMicroelectronics
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
TS932IN Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
Deltrol Controls
Other Relays;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SS14
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
4554
Jw Miller Magnetics
Other Semiconductors;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
American Power Devices
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
OPA2227UE4
Texas Instruments
OPA2227UE4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates on +/-15V supplies, has a unity gain bandwidth of 8MHz, and consumes 7.6mA max supply current. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA244NA/250
OPA244NA/250 by Texas Instruments is a micropower operational amplifier with 2000uV max input offset voltage, 98dB nominal CMRR, and 430kHz unity gain bandwidth. Ideal for industrial applications requiring low power consumption and precise signal amplification in compact designs.
OPA320AIDBVT
OPA320AIDBVT by Texas Instruments is a low-offset operational amplifier with 150uV max input offset voltage, 96dB nominal CMRR, and 20000kHz unity gain bandwidth. Ideal for automotive applications due to its low-bias current of 0.0000009uA and VFB architecture. Package style: small outline, low profile, shrink pitch.
LM324NE4
LM324NE4 by Texas Instruments is an operational amplifier with 4 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. Widely used in commercial applications, it offers low-bias operation and micropower technology for efficient performance in various electronic circuits.
TLV2371IDBVRG4
TLV2371IDBVRG4 by Texas Instruments is a CMOS Operational Amplifier with low bias current (0.00006 uA), high common mode rejection ratio (72 dB), and wideband unity gain bandwidth (3000 kHz). Ideal for automotive applications due to its small outline, low profile package and temperature grade.
LM7321MF/NOPB
LM7321MF/NOPB by Texas Instruments is a 5-terminal Op Amp with 6000uV max input offset voltage, 1.5uA max average bias current, and 80dB nominal CMRR. Ideal for automotive applications due to its low profile design, it operates at -40 to 125 °C with a unity gain bandwidth of 16MHz.
LM324MT/NOPB
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM2904N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
INA168NA/3K
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LM324AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TLV2372IDRG4
TLV2372IDRG4 by Texas Instruments is a dual operational amplifier with 6000uV max input offset voltage, 1.32mA max supply current, and 3000kHz nominal unity gain bandwidth. Ideal for automotive applications due to its low-bias design and wideband technology.
INA200AIDGKR
Texas Instruments' INA200AIDGKR is an operational amplifier with a max input offset voltage of 2500uV and a max average bias current of 16uA. This IC, suitable for automotive applications, features a nominal voltage of 12V and a common mode voltage up to 80V. With a response time of 1300ns, it operates in temperatures ranging from -40°C to 125°C.
AD8675ARZ-REEL
Analog Devices
AD8675ARZ-REEL by Analog Devices is an Operational Amplifier with 240uV Max Input Offset Voltage, 130dB CMRR, and 10000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its low-offset and wide temperature range capabilities.
TL082CD
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OP2177ARZ
OP2177ARZ by Analog Devices is a micropower operational amplifier with low-offset and high frequency compensation. It operates at a wide temperature range of -40 to 125 °C, making it suitable for automotive applications. With a max supply voltage of +-15V and unity gain bandwidth of 1300 kHz, it offers precise amplification in compact small outline package style.
LM7321MFX
LM7321MFX by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 80dB CMRR, and 16000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
OPA2340EA-250
Burr-Brown Corporation
OPA2340EA-250 by Burr-Brown is a dual operational amplifier with 500uV max input offset voltage and 84dB nominal CMRR. It operates in industrial temperature range (-40 to 85 °C) and has a unity gain bandwidth of 5500 kHz. Ideal for precision applications requiring low bias current and high CMRR.
OPA277UA
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OP07CSZ-REEL7
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TS931ILT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
TS931IDT
TS932BIN
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TS932ID
TS932BID
TS931ID
TS931ALT
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
TS932AID
TS932ADT
TS931BID
TS932AIPT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TS932AIDT
TS931BILT
TS932BIDT
TS931AILT
TS931AID
TS931ADT
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Packing Method: TAPE AND REEL;
TS931AIDT
TS931BIDT
TS932AIN
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved