Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STD70NH02L from STMicroelectronics is a powerful N-channel FET designed for switching applications. It features a max drain current of 60 A, a breakdown voltage of 24 V, and operates at up to 175 °C. Ideal for high-efficiency power management in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
IDEA Electronic Components Group
$0.754
$0.679
MKK Technologies
$1.419
DigiPath Technology Company
Metaverse IC Inc.
Kepictronics
Parana Technologies
$0.902
Corphita
The use of plastic/epoxy for the package body provides excellent protection against environmental factors and ensures durability.
N-channel FETs are known for their high efficiency and better performance in switching applications.
The built-in diode enhances performance in switching applications by providing reverse polarity protection.
Designed specifically for switching applications, making it ideal for power management and control.
Surface mount technology allows for a compact design, enabling easy integration into various circuits.
A minimum breakdown voltage of 24V is suitable for various applications, providing flexibility in design.
Rectangular packaging aids in efficient space utilization on PCBs and simplifies assembly.
Gull wing terminals provide reliable soldering and mechanical strength, ensuring good connectivity.
Enhancement mode operation allows for more efficient switching, making this FET an excellent choice for high-speed applications.
A high pulsed drain current capability of 240A allows this FET to handle transient conditions effectively.
A robust avalanche energy rating indicates the FET can withstand high-energy transients without damage, enhancing reliability.
With a maximum drain current of 60A, this FET is suitable for high-power applications.
The two-terminal design simplifies connections and reduces complexity in circuit design.
The ability to dissipate up to 70W of power ensures effective thermal management during operation.
The small outline package style contributes to compact designs, making it suitable for space-sensitive applications.
MOS technology allows for high speed and low power consumption, making this FET energy-efficient.
A high maximum operating temperature of 175 °C ensures reliability in demanding environments.
Silicon as the primary material provides excellent electrical characteristics and is widely used in power applications.
Matte tin finish on terminals enhances solderability and prevents oxidation, ensuring lasting connections.
A consistent maximum drain current of 60A reinforces the device's capability for handling significant power loads.
A low on-resistance of 0.008 ohm minimizes power loss and improves efficiency in switching applications.
The single terminal position contributes to ease of layout design and simplifies PCB design.
Having the case connection at the drain facilitates better heat dissipation and enhances stability.
Power Field Effect Transistors (FET) STD70NH02L attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
STD70NH02L Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
EU2B-YS303C
Idec
ROTARY SWITCH;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
FDS6680A
FDS6680A by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 50A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 2.5W and can handle up to 12.5A drain current.
IRF540NSTRRPBF
Infineon Technologies
IRF540NSTRRPBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 33A Drain Current. It's used for SWITCHING applications, operates in ENHANCEMENT MODE, and has a max power dissipation of 130W. Ideal for high-power electronic circuits requiring efficient switching capabilities.
PSMN4R8-100BSE
NXP Semiconductors
PSMN4R8-100BSE by NXP is an N-channel Power FET with 100V DS breakdown voltage and 120A max drain current. Ideal for switching applications, it features a built-in diode, 0.0048 ohm RDS(on), and 707A pulsed drain current.
BSS123
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (ID): .17 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IPZ40N04S5L2R8ATMA1
Infineon's IPZ40N04S5L2R8ATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 160A IDM, and 0.0038 ohm RDS(ON). Ideal for automotive applications due to AEC-Q101 standard compliance.
FQB47P06TM-AM002
FQB47P06TM-AM002 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, 188A IDM, and 0.026 ohm RDS. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Features include 820mJ EAS, 160W Pdiss, and -55 to +175°C Temp Range.
IRF5305PBF
IRF5305PBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM and 0.06 ohm RDS(ON), suitable for high-power circuits. With a max power dissipation of 110W and operating temperature up to 175°C, it ensures reliable performance in various environments.
SI7155DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7155DP-T1-GE3 is a P-channel FET with 40V DS breakdown voltage and 200A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 104W. The MOSFET features a drain-source on resistance of 0.0046 ohm and can withstand temperatures from -55 to 150°C.
MSC035SMA170B4
Power Field-Effect Transistors;
IRF7410TRPBF
Infineon's IRF7410TRPBF is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 65A IDM, 0.007 ohm RDS(on), and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package, it can withstand -55 to 150 °C temperatures.
IRFR9024NTRPBF
IRFR9024NTRPBF by Infineon Technologies is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 44A and EAS of 62mJ, operating in ENHANCEMENT MODE. With a compact RECTANGULAR package and GULL WING terminals, it offers high performance in a small outline design.
IRF9530NSTRLPBF
IRF9530NSTRLPBF by Infineon is a P-CHANNEL FET with 100V DS Breakdown Voltage, 56A IDM, and 0.2 ohm RDS. It's used for SWITCHING applications in ENHANCEMENT MODE with 175°C Max Operating Temp.
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BS170
Topaz Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Maximum Operating Temperature: 150 Cel;
DMP3098L-7
Diodes Incorporated
DMP3098L-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max pulsed drain current of 11A. It is used for switching applications and operates in enhancement mode.
IRF9Z34NSTRLPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Additional Features: AVALANCHE RATED, HIGH RELIABILITY;
CSD18540Q5BT
CSD18540Q5BT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 400A IDM, and 0.0033 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it can handle temperatures from -55 to 175 °C.
IPB017N10N5LFATMA1
Infineon's IPB017N10N5LFATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 720A IDM, and 0.0017 ohm RDS(on). Ideal for power applications requiring high current handling and low on-resistance. Suitable for use in power supplies, motor control, and automotive systems due to its high power dissipation of 313W and wide operating temperature range (-55 to 150 °C).
IRLML6246TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Finish: MATTE TIN; No. of Elements: 1;
IRF7425TRPBF-1
IRF7425TRPBF-1 by Infineon is a P-channel Power FET with 20V DS breakdown voltage, 15A max drain current, and 0.0082 ohm RDS(on). It's used in power management applications due to its small outline package, 60A pulsed drain current, and -55 to +150°C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STD7NK40ZT4
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PSSO-G2;
STD7N80K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Maximum Operating Temperature: 150 Cel; Avalanche Energy Rating (EAS): 88 mJ;
STD7NM80-1
STD7NM80-1 by STMicroelectronics is a power FET with a min DS breakdown voltage of 800V. It is an N-channel transistor used for switching applications, with a max pulsed drain current of 26A and a max power dissipation of 90W.
STD7NM80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 90 W; Maximum Time At Peak Reflow Temperature (s): 30; Qualification: Not Qualified;
STD70NS04ZL
STD70NS04ZL by STMicroelectronics is a N-CHANNEL Power FET with 33V DS Breakdown Voltage and 280A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.0125 ohm RDS(on), and operates in ENHANCEMENT MODE. This surface mount transistor has a max power dissipation of 110W and can handle up to 70A ID.
STD75N3LLH6
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Maximum Drain Current (ID): 75 A; No. of Elements: 1;
STD7N60M2
STD7N60M2 by STMicroelectronics is a N-CHANNEL Power FET with 600V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has 0.95 ohm Drain-Source On Resistance and 99mJ EAS rating.
STD70N10F4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; No. of Elements: 1; Package Body Material: PLASTIC/EPOXY;
STD7ANM60N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Maximum Drain Current (ID): 5 A; Minimum Operating Temperature: -55 Cel;
STD7LN80K5
Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STD7N52DK3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 90 W; Operating Mode: ENHANCEMENT MODE; JEDEC-95 Code: TO-252;
STD70N6F3TRL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): 70 A;
STD7LNM60N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON;
STD70N03L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Pulsed Drain Current (IDM): 280 A; Package Shape: RECTANGULAR;
STD70NH02L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Drain Current (Abs) (ID): 60 A; Qualification: Not Qualified;
STD7N52DK3TRL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Time At Peak Reflow Temperature (s): 30; JESD-30 Code: R-PSSO-G2;
STD70NH02LT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Terminal Finish: MATTE TIN; No. of Elements: 1;
STD70N2LH5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Maximum Drain Current (Abs) (ID): 48 A; Package Style (Meter): SMALL OUTLINE;
STD70R1K3S
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved