Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACST210-8BTR by STMicroelectronics is a SNUBBERLESS TRIAC with 2A RMS On-state Current, 800V Repetitive Peak Off-state Voltage, and -40 to 150°C Operating Temperature range. Ideal for applications requiring precise AC switching in compact designs.
Median Price
$1.210
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.498
1k+ parts
$0.350
10k+ parts
-
Mouser Electronics
$0.499
$0.351
$0.283
Newark
$1.310
$0.607
$0.462
$0.444
Element14
$1.670
$0.688
$0.470
$0.407
Elektronika Sales Private Limited
Avnet
Farnell
$0.408
$0.287
$0.220
Verical
$0.392
Nova Conductors
$0.428
Digiode
$0.745
TME
$1.130
$0.465
$0.356
Chip Stock
VNN
Vyrian
Cyclops Electronics Ltd
IBS Electronics
$0.361
$0.347
ComSIT Distribution GmbH
Anansix
Ampacity Inc.
$0.415
Netroflash
$0.398
Corphita
$0.706
Continental Prestige Electronics
$0.805
$0.488
$0.263
Modulus Dynamics
$3.312
IDEA Electronic Components Group
$3.837
$3.454
MKK Technologies
$7.216
DigiPath Technology Company
Infinite Electronics LLP (Excess)
Lixinc
Perfect Parts
A-Z Elektronik GmbH
Eastek
$0.390
Alle Elektronik GmbH
Futuretech Components
Authorized Procurement Solutions
Parana Technologies
$4.588
Kepictronics
The high DC gate trigger current ensures reliable triggering of the TRIAC, making it suitable for a variety of applications.
Being surface mountable allows for easy and efficient integration into circuit boards, saving space and simplifying assembly.
Low leakage current helps in minimizing power losses and ensuring efficient operation of the TRIAC.
With a high maximum operating temperature, this TRIAC can withstand demanding environments and provide reliable performance.
The snubberless design of the TRIAC simplifies circuitry and enhances reliability by reducing the need for additional components.
Triode For Alternating Current (TRIAC) ACST210-8BTR attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from STMicroelectronics
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Moisture Sensitivity Level (MSL):
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Reflow Temperature (C):
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
ACST210-8BTR Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - ACST210-8B Copper Wire Conversion 30/Oct/2013
PCN Assembly/Origin - IPG-DIS/14/8630 01/Aug/2014
PCN Packaging - Box Label Chg 28/Jul/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1554216004
Molex
WIRE AND CABLE;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Onsemi
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BT136S-600F,118
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC215D
TIC215D by Texas Instruments is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 3A. Ideal for applications requiring precise AC power control like dimmers, motor speed controllers, and heating regulators due to its 4-quadrant logic level TRIAC configuration.
BTA204X-600C
NXP Semiconductors
BTA204X-600C by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It has a trigger device type of snubberless TRIAC, making it suitable for AC power control applications. With an operating temperature up to 125°C, it offers reliable performance in various industrial settings.
BTA40-700B
BTA40-700B by STMicroelectronics is a single TRIAC with 315A non-repetitive peak on-state current and 40A max RMS on-state current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring high power switching capabilities. The device features a trigger device type of 4-quadrant logic level TRIAC, ideal for controlling AC loads in industrial and consumer electronics.
Z0103MUF
Z0103MUF by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with a max RMS On-state Current of 1A and Repetitive Peak Off-state Voltage of 600V. It operates b/w -40 to 125 °C and has a Max DC Gate Trigger Voltage of 1.3V. Ideal for applications requiring precise AC power control in various electronic devices.
BT139-600E/DG,127
TRIAC; Surface Mount: NO; Maximum Holding Current: 45 mA; Maximum RMS On-state Current: 16 A; JESD-609 Code: e3; Maximum Leakage Current: .5 mA;
TIC263E
TIC263E by Texas Instruments is a TRIAC with 25A RMS on-state current, 50mA max DC gate trigger current, and 500V repetitive peak off-state voltage. It is used in applications requiring precise AC power control such as dimmer switches, motor speed controls, and heating regulation.
DTA6C
DTA6C by Onsemi is a TRIAC with 1.5V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C, ideal for AC power control applications like dimmers and motor speed controllers.
MAC4NG
MAC4NG by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 4A, and repetitive peak off-state voltage of 800V. It operates b/w -40 °C to 125°C, ideal for AC power control applications in various industries. The package style is flange mount with a rectangular shape and through-hole terminal form.
TIC226M-S
Bourns
TIC226M-S by Bourns is a single TRIAC with a max RMS on-state current of 8A and repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level triggering, such as motor control and lighting systems.
MAC210A10
MAC210A10 by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 10A max RMS on-state current. It operates b/w -40 °C to 110°C, with a max DC gate trigger current of 50mA. Ideal for AC power control applications requiring reliable switching performance.
CLA20EF1200PZ-TRL
IXYS Corporation
TRIAC;
202
Icm International Controls & Measurements
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum RMS On-state Current: 2 A; Maximum On-state Voltage: 1.5 V; Minimum Operating Temperature: -40 Cel;
2N6344
The Onsemi 2N6344 is a TRIAC with max. DC gate trigger current of 100mA, max. RMS on-state current of 8A, and repetitive peak off-state voltage of 600V. It is used in applications requiring AC switching such as dimmers, motor speed controllers, and heating control systems.
TIC246A
TIC246A by Texas Instruments is a TRIAC with max. RMS On-state Current of 16A, DC Gate Trigger Voltage of 2.5V, and Operating Temp. range from -40 to 110°C. It is used as a trigger device in AC circuits for applications requiring precise current control and switching capabilities.
FKN08PN60
FKN08PN60 by Fairchild Semiconductor is a TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. It is used in AC power control applications due to its single configuration, cylindrical package style, and -40°C to 125°C operating temperature range.
BT138-600,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
DTA10G
DTA10G by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, with a max RMS on-state current of 10A and repetitive peak off-state voltage of 600V. Ideal for AC power control applications.
2N6073AG
Littelfuse
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA16-600CRG
BTA16-600CRG by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 16A max RMS on-state current, and 25mA max DC gate trigger current. It is ideal for applications requiring reliable AC switching in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACST410-8BTR
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Leakage Current: .5 mA;
ACST1210-7GTR
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; No. of Elements: 1;
ACST410-8B
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Package Shape: RECTANGULAR;
ACST410-8FP
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
ACST1210-7G
ACST8-8CG-TR
ACST8-8CG-TR by STMicroelectronics is a single TRIAC with 30mA DC gate trigger current and 8A RMS on-state current. It is a snubberless TRIAC suitable for applications requiring up to 800V repetitive peak off-state voltage, such as in lighting controls and motor control systems.
ACST1210-7T
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 1 V;
ACST1235-7GTR
ACST1235-7GTR by STMicroelectronics is a TRIAC with 12A RMS on-state current, 35mA max DC gate trigger current, and 700V repetitive peak off-state voltage. It is used in applications requiring precise AC power control like dimmers, motor speed controllers, and heating control systems.
ACST435-8BTR
ACST435-8BTR by STMicroelectronics is a TRIAC with 4A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
ACST610-8GTR
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Leakage Current: .02 mA;
ACST610-8R
TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JESD-609 Code: e3;
ACST830-8GTR
ACST12-7CG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Moisture Sensitivity Level (MSL): 1;
ACST210-8FP
SNUBBERLESS TRIAC; Surface Mount: NO; JESD-609 Code: e3; Maximum DC Gate Trigger Current: 10 mA; Maximum RMS On-state Current: 2 A; Terminal Finish: MATTE TIN;
ACST2-8SB
SNUBBERLESS TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
ACST1235-7G
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Repetitive Peak Off-state Voltage: 700 V;
ACST12-7CG-TR
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Time At Peak Reflow Temperature (s): 30;
ACST2-8SB-TR
ACST12-7CT
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum RMS On-state Current: 12 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved