Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Screw Terminals Description: 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Maximum Leakage Current: 5 mA; Maximum DC Gate Trigger Voltage: 3 V;
Median Price
$12.670
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$12.640
100+ parts
$7.190
1k+ parts
-
10k+ parts
DigiKey
$12.700
$6.287
Nova Conductors
$7.545
Chip Stock
Vyrian
Fibra_Brandt Electronic GMBH
Electronics Depot
Aztec Data Supply Inc.
$4.140
Continental Prestige Electronics
$7.394
AZTECH Wire
$11.108
Microchip USA
$31.360
Argo Parts USA
Kepictronics
Bastille Electronics
Triode For Alternating Current (TRIAC) TG35C60 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Sansha Electric Mfg
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Quick Connects Description:
Screw Terminals Description:
Maximum Holding Current:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
No. of Elements:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sub-Category:
Trigger Device Type:
TG35C60 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-305-5271, 5961013055271
NIIN
013055271
Sansha Electric MFG. Co., Ltd. is engaged in the development, production and sales on two business segments: Power Supply equipment and Power semiconductors. Power semiconductors are essential devices used to improve power efficiency and energy savings, by converting direct current to alternating current and precisely controlling the flow of current or the voltage increase and decrease. By combining both technologies, we provide various power semiconductors for power equipment and a wide selection of industrial power equipment from small power to larger ones, leading the industry in both domestic and overseas markets.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ACST410-8FP
ACST410-8FP by STMicroelectronics is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It has a single configuration, operates b/w -40 to 125°C, and features a plastic/epoxy package body material. Ideal for applications requiring AC switching in various electronic devices.
MAC97A6
MAC97A6 by Onsemi is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.6A. Ideal for applications requiring a 4 quadrant logic level TRIAC like dimmer switches, motor speed control, and AC switching circuits due to its high operating temperature range (-40 °C to 110°C) and low leakage current (0.1mA).
T1635-600G-TR
STMicroelectronics T1635-600G-TR is a single TRIAC with 16A max RMS on-state current, 35mA max DC gate trigger current, and 600V repetitive peak off-state voltage. Ideal for snubberless applications in temperature range -40 to 125°C.
NYT6-5D6DTG
NYT6-5D6DTG by Onsemi is a TRIAC with max DC gate trigger current of 10mA, leakage current of 0.001mA, and max operating temp of 110 °C. Ideal for AC applications requiring a trigger device, it has a max RMS on-state current of 6A and repetitive peak off-state voltage of 600V.
T3035H-6G
SNUBBERLESS TRIAC; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MAC15N
MAC15N by Onsemi is a TRIAC with 15A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches, motor speed control, and heating control systems.
2N6070A
2N6070A by Onsemi is a TRIAC with 20mA DC Gate Trigger Current, 2mA Leakage Current, and 110 °C Max Operating Temp. Ideal for applications requiring a Trigger Device Type TRIAC with 2A Max RMS On-state Current and 100V Repetitive Peak Off-state Voltage.
BTA316-800B,127
NXP Semiconductors
BTA316-800B,127 by NXP Semiconductors is a TRIAC with a max RMS on-state current of 16A and a repetitive peak off-state voltage of 800V. It is commonly used in applications requiring 4 quadrant logic level TRIACs, such as motor control and lighting systems.
MAC4DLM-1G
MAC4DLM-1G by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with max RMS On-state Current of 4A and Repetitive Peak Off-state Voltage of 600V. Ideal for AC applications, it has a DC Gate Trigger Current of 3mA and operates b/w -40 to 110 °C, making it suitable for various electronic devices.
BT136S-600D
BT136S-600D by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It is designed for applications requiring a trigger device with a max DC gate trigger current of 5mA, such as in AC power control circuits.
MAC210A8
MAC210A8 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 10A max RMS on-state current. It operates b/w -40 to 125 °C, with a max DC gate trigger current of 50mA. Ideal for AC power control applications requiring reliable switching capabilities.
MAC4DCN-001G
MAC4DCN-001G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 35mA max DC gate trigger current and operates b/w -40 to 125 °C. Ideal for AC power control applications requiring high reliability and performance in industrial settings.
BTA416Y-800B,127
Ween Semiconductors
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
MAC9D
MAC9D by Onsemi is a TRIAC with 8A RMS on-state current, 400V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches, motor speed control, and heating elements.
Q6015L6
Teccor Electronics
ALTERNISTOR TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
MAC229A10FP
MAC229A10FP by Onsemi is a TRIAC with 800V repetitive peak off-state voltage, 8A max RMS on-state current, and 20mA max DC gate trigger current. It is used in applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC15A8G
MAC15A8G by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage, 15A max RMS on-state current, and 50mA max DC gate trigger current. It is ideal for applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
DTN8E
DTN8E by Onsemi is a TRIAC with 1.5V max on-state voltage, 50mA max DC gate trigger current, and 8A max RMS on-state current. It operates b/w -40 °C to 110°C and has a repetitive peak off-state voltage of 400V. Ideal for AC power control applications.
Z0107MN
Philips Semiconductors
TRIAC; Surface Mount: YES; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn); Maximum On-state Voltage: 1.6 V; Maximum Leakage Current: .5 mA;
CLA60MT1200NHB
Littelfuse
CLA60MT1200NHB by Littelfuse is a TRIAC with 1200V repetitive peak off-state voltage, 66A max RMS on-state current, and -40 to 150°C operating temperature range. Ideal for AC power control applications requiring a trigger device with 80mA max DC gate trigger current and 2mA max leakage current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TG35C60
Sanrex
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
Hbcontrols
TG35C20
Sansha Electric Mfg
TRIAC; Quick Connects Description: G-MT1-MT2; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Maximum Holding Current: 30 mA; Maximum Operating Temperature: 125 Cel;
TG35C30
TRIAC; Quick Connects Description: G-MT1-MT2; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Maximum On-state Voltage: 1.4 V; Non Repetitive Peak On-state Current: 330 A;
TG35C40
TRIAC; Maximum DC Gate Trigger Voltage: 3 V; Maximum Holding Current: 30 mA; Minimum Operating Temperature: -40 Cel; Maximum On-state Voltage: 1.4 V; Screw Terminals Description: 0;
TG35C50
TRIAC; Screw Terminals Description: 0; Maximum DC Gate Trigger Current: 50 mA; Non Repetitive Peak On-state Current: 330 A; Minimum Operating Temperature: -40 Cel; Maximum DC Gate Trigger Voltage: 3 V;
TG35D40
TRIAC; Maximum Operating Temperature: 125 Cel; Maximum Leakage Current: 5 mA; Maximum DC Gate Trigger Voltage: 3 V; Maximum On-state Voltage: 1.4 V; No. of Elements: 1;
TG35D60
TRIAC; Screw Terminals Description: 0; Maximum Operating Temperature: 125 Cel; Quick Connects Description: G-MT1-MT2; Maximum DC Gate Trigger Voltage: 3 V; Maximum Holding Current: 30 mA;
TG35E20
TRIAC; Screw Terminals Description: 0; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 50 mA; Maximum Holding Current: 30 mA; Quick Connects Description: G-MT1-MT2;
TG35E30
TRIAC; Maximum DC Gate Trigger Voltage: 3 V; Non Repetitive Peak On-state Current: 330 A; Screw Terminals Description: 0; Maximum DC Gate Trigger Current: 50 mA; Maximum On-state Voltage: 1.4 V;
TG35E40
TRIAC; Screw Terminals Description: 0; Maximum DC Gate Trigger Current: 50 mA; Maximum On-state Voltage: 1.4 V; Maximum Operating Temperature: 125 Cel; Maximum Holding Current: 30 mA;
TG35E50
TRIAC; Non Repetitive Peak On-state Current: 330 A; Screw Terminals Description: 0; Maximum DC Gate Trigger Voltage: 3 V; Maximum Holding Current: 30 mA; Minimum Operating Temperature: -40 Cel;
TG35E60
TRIAC; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Quick Connects Description: G-MT1-MT2; Maximum Holding Current: 30 mA; Non Repetitive Peak On-state Current: 330 A;
TG35F40
TRIAC; No. of Elements: 1; Maximum On-state Voltage: 1.38 V; Screw Terminals Description: 0; Maximum DC Gate Trigger Voltage: 2.5 V; Non Repetitive Peak On-state Current: 330 A;
TG35F50
TRIAC; Quick Connects Description: G-MT1-MT2; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 50 mA; Maximum On-state Voltage: 1.38 V; Maximum DC Gate Trigger Voltage: 2.5 V;
TG35F60
TRIAC; Quick Connects Description: G-MT1-MT2; Maximum Operating Temperature: 125 Cel; Screw Terminals Description: 0; Maximum DC Gate Trigger Current: 50 mA; Maximum Holding Current: 30 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved