Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Prism Electronics
Authorized Procurement Solutions
Corphita
Cellphone ICs SI4704-B20-GM attributes and parameters. Explore more Cellphone ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI4704-B20-GM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Silicon Standard
CC2510F16RHHT
CC2510F16RHHT by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with power supplies of 2.5/3.3V for RF and baseband circuits. This CMOS technology IC has a terminal pitch of 0.5mm and is suitable for industrial temperature grade applications.
SARA-R410M-02B
U-blox Ag
SARA-R410M-02B by U-blox Ag is a CELL IC with RECTANGULAR package, 96 terminals, and operates b/w -20 to 65 °C. It is used for RF and baseband circuits in telecom applications due to its 3.8V supply voltage and compact size of 16x26mm.
HMC422MS8E
Analog Devices
Analog Devices' HMC422MS8E is a cellphone IC with 8 terminals in a small outline, thin profile package. It operates b/w -40 to 85°C and has a terminal pitch of 0.65mm. Ideal for RF and baseband circuits in telecom applications due to its matte tin finish and dual terminal position.
CC1131IRHBRG4Q1
CC1131IRHBRG4Q1 by Texas Instruments is a cellphone IC with 32 terminals, operating at -40 to 85°C. It features RF and baseband circuits, operates at 3V, and has a data rate of 0.25 Mbps. This chip carrier package is suitable for industrial applications requiring high-speed communication in compact devices.
LMV225TLX/NOPB
LMV225TLX/NOPB by Texas Instruments is a cellphone IC with 4 terminals, operating b/w -40 to 85°C. It features a very thin profile grid array package style and requires 2.7V nominal voltage. Ideal for RF and baseband circuits in telecom applications due to its low max supply current of 8mA.
NRF9160-SIAA-B1A-R7
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIAA-B1A-R7 is a cellular IC with RF and baseband circuit, operating at -40 to 85°C. It features a grid array package style, 127 terminals, and 3.8V supply voltage. Ideal for telecom applications requiring compact design and industrial temperature range.
ADL5812ACPZ-R7
ADL5812ACPZ-R7 by Analog Devices is a 40-terminal cellphone IC with BICMOS technology. It operates b/w -40 to 85°C, has a package style of CHIP CARRIER, and requires a nominal voltage of 5V. This RF and baseband circuit is ideal for telecom applications due to its compact square shape and low profile design.
TCM320AC56IPT
TCM320AC56IPT by Texas Instruments is a Cellphone IC with 48 terminals, operating at temperatures from -40 to 85°C. It features a 13-bit linear codec, companding law MU-LAW, and telecom IC type BASEBAND CIRCUIT. This low-profile flatpack package has a terminal pitch of 0.5mm and is ideal for industrial applications requiring fine-pitch technology.
LMH6521SQX/NOPB
LMH6521SQX/NOPB by Texas Instruments is a cellphone IC with 2 channels, RF and baseband circuit. It operates at -40 to 85°C, has a gain tolerance of 26 dB, and draws a max current of 245 mA. Its square package style measures 5x5 mm with 32 terminals in quad position for industrial telecom applications.
AD607ARSZ-REEL
AD607ARSZ-REEL by Analog Devices is a BASEBAND CIRCUIT for cellphones. It operates b/w -25 to 85°C with a supply voltage of 3V. This SMALL OUTLINE IC has 20 terminals, matte tin finish, and measures 7.2mm x 5.3mm in size for telecom applications.
TRF6901PT
TRF6901PT by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It has a supply voltage of 2/3.3V and low profile flatpack package style. Ideal for RF and baseband circuits in industrial telecom applications.
LMV225UR
LMV225UR by Texas Instruments is a Cellphone IC with 4 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 2.7V, making it ideal for cellphone applications.
SARA-U201-04B-00
SARA-U201-04B-00 by U-blox Ag is a CELLPHONE IC with 96 terminals in RECTANGULAR CHIP CARRIER package. It operates b/w -20 to 65 °C, suitable for TELECOM CIRCUITS with 3.8V supply voltage.
ADF4360-9BCPZ
Analog Devices' ADF4360-9BCPZ is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates at -40 to 85°C, with a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it features matte tin finish and very thin profile for industrial telecom applications.
ADF7020-1BCPZ
Analog Devices' ADF7020-1BCPZ is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a supply voltage of 2.5/3.3V, RF and baseband circuits for telecom applications, and a compact square package suitable for surface mounting in industrial settings.
RFFM6903TR7
Qorvo
Qorvo's RFFM6903TR7 is a 28-terminal RF and baseband circuit IC for cellphones. It operates b/w -40 to 85°C, with a supply voltage of 3.6V. The package style is grid array, suitable for industrial telecom applications.
AD6653BCPZ-125
AD6653BCPZ-125 by Analog Devices is a cellphone IC with 64 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, with a nominal voltage of 1.8V. Ideal for baseband circuits, it has a very thin profile and matte tin finish for industrial-grade telecom applications.
ADF4360-1BCP
Analog Devices ADF4360-1BCP is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates at -40 to 85 °C, with a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuit applications due to its compact size and industrial temperature grade suitability.
HMC682LP6CTR
Analog Devices' HMC682LP6CTR is a 40-terminal cellphone IC with a package style of chip carrier, heat sink/slug, and very thin profile. Operating temperature ranges from -40 to 85 °C, making it suitable for industrial telecom applications requiring RF and baseband circuit integration at a nominal voltage of 5V.
TRF5901PT
TRF5901PT by Texas Instruments is a cellphone IC with 48 terminals in a square package. It operates at -40 to 85°C, consuming 0.053mA at 3V supply voltage. This RF and baseband circuit uses CMOS technology for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved