Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI3000-KSR by Silicon Labs is a small outline, surface mount audio codec with 16 terminals. It operates synchronously and has a temperature range of 0 to 70°C. This programmable codec is commonly used in telecom applications for audio processing.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Cyclops Electronics Ltd
Nova Conductors
Corohmni
$9.878
AZTECH Wire
$11.508
Ampacity Inc.
$945.000
Continental Prestige Electronics
Bastille Electronics
Argo Parts USA
Corphita
Kepictronics
Plastic/Epoxy material provides good durability and protection for the internal components of the audio codec, ensuring reliability and longevity.
Surface mount capability allows for easy and efficient integration onto circuit boards, saving space and simplifying manufacturing processes.
Synchronous operation ensures accurate timing and synchronization within the audio codec, resulting in high quality audio output.
Operating at a nominal supply voltage of 3.3V allows the audio codec to be compatible with a wide range of electronic devices and power sources.
Having a built-in filter helps to eliminate noise and interference, resulting in clean and clear audio playback.
Audio Codecs SI3000-KSR attributes and parameters. Explore more Audio Codecs devices from Silicon Labs
Filter:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI3000-KSR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Eic Semiconductor
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Itt Semiconductor
1N4148W-T
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ3GEY0R00V
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Kingwell Technonlogy
PCF8591TD-T
Philips Semiconductors
Codecs; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ALC888S-VD2-GR
Realtek Semiconductor
Realtek Semiconductor's ALC888S-VD2-GR is a 10-channel audio codec with synchronous operation. It features a 3.3V supply voltage, 24um resolution, and includes a filter for enhanced sound quality. Ideal for telecom applications requiring PCM encoding/decoding in a compact square package with gull wing terminals.
TLV320AIC3101IRHBR
TLV320AIC3101IRHBR by Texas Instruments is an Audio Codec with 2 channels, operating in industrial temperature range. It features two's complement output/input codes and synchronous operation mode. Ideal for PCM codec applications in telecom industry due to its small chip carrier package and single-ended/differential input type.
TCM29C14DW
TCM29C14DW by Texas Instruments is a PCM CODEC with A/MU-LAW companding law. Operating at +-5V, it has 24 terminals in a small outline package for synchronous use in audio applications. With a temperature range of 0-70°C, this CMOS technology device features gull wing terminals and a rectangular shape.
TP3054ADW
TP3054ADW by Texas Instruments is a PCM CODEC with +-5V power supplies, 16 terminals, and CMOS technology. It operates in synchronous/asynchronous mode at temperatures from 0 to 70°C. Ideal for audio applications requiring small outline packages and companding law support.
TCM29C17DW
TCM29C17DW by Texas Instruments is a PCM CODEC with A-LAW companding law. Operating at +-5V, it has 16 terminals in a small outline package suitable for telecom applications. With synchronous mode and filter feature, it operates b/w 0-70°C in commercial grade CMOS technology.
TLV320AIC24KIPFBG4
TLV320AIC24KIPFBG4 by Texas Instruments is an Audio Codec with 2 channels, operating at -40 to 85°C. It features TWOS COMPLEMENT output/input codes, SYNCHRONOUS mode, and 1.8/3.3V power supplies. Ideal for telecom applications due to its PROGRAMMABLE CODEC type and SINGLE-ENDED/DIFF input.
SGTL5000XNBA3
NXP Semiconductors
NXP Semiconductors' SGTL5000XNBA3 is a 32-terminal audio codec with synchronous operation, offering 2 channels and a max output voltage of 3.11V. Ideal for PCM codec applications in telecom ICs, this chip carrier package has a very thin profile and operates b/w -40°C to 85°C.
TP13057BDWR
TP13057BDWR by Texas Instruments is a PCM CODEC with A-LAW companding law. It operates on +-5V power supplies, has 16 terminals in a small outline package, and can withstand industrial temperature grades. Ideal for telecom applications requiring synchronous/asynchronous operation and filtering capabilities.
TCM37C15AIN
TCM37C15AIN by Texas Instruments is an Audio Codec with A-LAW companding law, operating at ±5V. It features 20 terminals in a rectangular package style, suitable for PCM CODEC applications in industrial temperature environments. The codec has synchronous operation and includes a filter with max gain tolerance of 0.2 dB.
TLV320AD11APZR
TLV320AD11APZR by Texas Instruments is an Audio Codec with 100 terminals, operating at 3.3V. It features synchronous mode, ADSL codec type, and a temperature range of -40 to 85°C. Ideal for telecom applications requiring a compact flatpack design with fine pitch terminals.
TLC32042IFN
TLC32042IFN by Texas Instruments is a 14-bit PCM CODEC with +-5V power supplies, operating in synchronous/asynchronous mode. This audio codec comes in a square chip carrier package style and is ideal for industrial telecom applications due to its filter feature and wide temperature range of -40 to 85°C.
TLV320AC36CPT
TLV320AC36CPT by Texas Instruments is a 48-terminal audio codec with 13-bit linear coding and mu-law companding law. It operates on 3/5V power supplies, has a max supply current of 7.5mA, and is ideal for PCM codec applications in telecom due to its synchronous/asynchronous operating mode.
TCM320AC41CDW
TCM320AC41CDW by Texas Instruments is a 20-terminal PCM CODEC with A-LAW companding law. It operates in synchronous/asynchronous mode, with 13-bit linear coding and max supply current of 7.5 mA. This small outline audio codec is ideal for telecom applications due to its compact size and filter feature.
ETC5057J/G
STMicroelectronics ETC5057J/G is a PCM CODEC with +-5V power supplies, 16 terminals, and A-LAW companding law. It operates in commercial temperature grade from 0 to 70 °C, suitable for telecom applications requiring audio codecs with ceramic package and IN-LINE style.
TLVAIC12KIRHBTG4
TLVAIC12KIRHBTG4 by Texas Instruments is a 32-terminal audio codec with two channels. It operates in synchronous mode, supporting input and output codes in twos complement format. With a max analog input of 2V, it is ideal for industrial applications requiring high-resolution audio processing.
TLV320AIC12IDBTR
TLV320AIC12IDBTR by Texas Instruments is a 30-terminal audio codec with 4 channels. It operates in synchronous mode, offering two's complement input and output codes. With a small outline package style, it suits industrial applications requiring a CMOS technology programmable codec for audio processing.
TP3054WM/NOPB
TP3054WM/NOPB by Texas Instruments is an Audio Codec with +-5V power supplies, 16 terminals, and MU-LAW companding law. It operates in synchronous/asynchronous mode and is ideal for PCM CODEC applications. This small outline package has a max operating temperature of 70°C and measures 10.3mm x 7.5mm x 2.65mm.
TCM2910AN
Texas Instruments TCM2910AN is a PCM CODEC with +-5,12V power supplies. It operates b/w 0-70°C, featuring 24 terminals in an IN-LINE package. Ideal for telecom applications due to MU-LAW companding law and MOS technology.
TP13054BN
TP13054BN by Texas Instruments is an Audio Codec with +-5V power supplies, 16 terminals, and companding law MU-LAW. It operates in synchronous/asynchronous mode and has a temperature range of -40 to 85 °C. Ideal for PCM codec applications in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI3000-C-FS
Skyworks Solutions
PROGRAMMABLE CODEC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Silicon Labs
SI3000-C-FS by Silicon Labs is a small outline, surface mount audio codec with 16 terminals. It operates synchronously and has a max temperature of 70°C. This programmable codec is commonly used in telecom applications for audio processing.
SI3000-KS
SI3000-C-GSR
PROGRAMMABLE CODEC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI3000-C-GS
SI3000-C-FSR
SI3000-C-FSR by Silicon Labs is a 16-terminal audio codec with synchronous operation. It features a small outline package, tin terminal finish, and operates at temperatures from 0 to 70°C. Ideal for telecom applications requiring programmable codecs with a supply voltage of 3.3V.
SI3000-X-FSR
SI3000-X-FS
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved