Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI3000-C-GS by Silicon Labs is a programmable codec with 16 terminals, operating at -40 to 85°C. It features synchronous mode, matte tin finish, and small outline package for audio applications. With a supply voltage of 3.3V and industrial temperature grade, it offers high-quality audio processing in compact dimensions.
Median Price
$5.083
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
< 1k
Symmetry
1+ parts
$2.090
100+ parts
-
1k+ parts
10k+ parts
Arrow
$4.457
Verical
Digiode
$1.986
Vyrian
Nova Conductors
PC Components Company LLC
Bristol Electronics
Corphita
$1.881
Ampacity Inc.
$3.870
Component Stockers USA
$4.550
$3.240
Microchip USA
$31.590
Lixinc
Authorized Procurement Solutions
Perfect Parts
Aranea Global
Provides durability and robustness to the product, making it suitable for various applications.
Enables easy and secure installation onto circuit boards, saving space and improving efficiency.
Allows for synchronized operation with other components, enhancing overall system performance.
Optimal voltage level for efficient and reliable functionality of the audio codec.
Helps in improving the audio quality by reducing noise and interference, providing clear and crisp sound output.
Audio Codecs SI3000-C-GS attributes and parameters. Explore more Audio Codecs devices from Silicon Labs
Additional Features:
Filter:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI3000-C-GS Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BAV99WT1G
Fairchild Semiconductor
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Meritek Electronics
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
TCM38C17IDLR
TCM38C17IDLR by Texas Instruments is a 48-terminal PCM CODEC with A/MU-LAW companding law. Operating in synchronous mode, it has a temperature range of -40 to 85 °C and uses CMOS technology. This audio codec is ideal for industrial telecom applications due to its compact rectangular package design and nickel palladium gold terminal finish.
TLV320AIC3106IGQE
TLV320AIC3106IGQE by Texas Instruments is an 80-terminal audio codec with synchronous operation. It features a package style of grid array, very thin profile, and fine pitch. Ideal for industrial applications requiring PCM codec with nominal voltage of 1.8V.
LM49360RL
PCM CODEC;
TP3067ADWR
TP3067ADWR by Texas Instruments is a PCM CODEC with A-LAW companding law. It operates in SYNCHRONOUS/ASYNCHRONOUS mode, has 20 terminals, and supports -5V to 5V supply voltage range. This small outline package is ideal for telecom applications requiring audio codecs.
TP3071N-G/NOPB
TP3071N-G/NOPB by Texas Instruments is an Audio Codec with +-5V power supplies, 20 terminals, and A/MU-LAW companding law. It operates synchronously in commercial temperature grade applications. The package style is in-line with a rectangular shape and matte tin terminal finish for telecom IC type usage.
SI3000-KS
Silicon Labs
SI3000-KS by Silicon Labs is a small outline audio codec with 16 terminals. It operates synchronously at temperatures ranging from 0 to 70°C. Ideal for telecom applications, this programmable codec has a nominal voltage of 3.3V and features a filter for enhanced audio processing.
TP3057WMX
TP3057WMX by Texas Instruments is a PCM CODEC with A-LAW companding law. It operates on +-5V power supplies, in synchronous/asynchronous mode. Ideal for audio applications, this small outline package has 16 terminals and operates b/w 0-70°C.
TS5070FNTR
STMicroelectronics TS5070FNTR is a 28-terminal audio codec with +-5V power supplies. Operating in synchronous mode, it has companding law A/MU-LAW and max gain tolerance of 0.15 dB. Ideal for telecom applications, this industrial-grade chip carrier package offers filter functionality and operates b/w -40 to 85 °C.
TCM320AC54N
TCM320AC54N by Texas Instruments is an Audio Codec with +-5V power supplies, 16 terminals, and mu-law companding law. It operates synchronously in commercial temperature grade applications like PCM codecs for telecom ICs.
TP3057BJ
TP3057BJ by Texas Instruments is an Audio Codec with a package style of IN-LINE and operates in synchronous/asynchronous mode. It has a supply voltage of +-5V, 16 terminals, and A-LAW companding law. Ideal for PCM CODEC applications in telecom ICs due to its compact size (19.56mm x 7.62mm x 5.08mm) and commercial temperature grade (-40°C to +85°C).
MC145507DW
PCM CODEC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TLV320AIC3007IRSBT
TLV320AIC3007IRSBT by Texas Instruments is an Audio Codec with 2 channels, operating in synchronous mode. It offers a resolution of 16um and supports ADPCM codec type for telecom applications. The package style is chip carrier with very thin profile, suitable for surface mount assembly.
PEF33004HLV21SLL7V
Intel
PCM CODEC; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TLV320AIC3101IRHBT
TLV320AIC3101IRHBT by Texas Instruments is an audio codec with 2 channels, operating from -40 to 85°C. It features two's complement input/output codes and synchronous operation. Ideal for industrial applications requiring PCM codec with single-ended/differential inputs and on-chip filters.
TCM129C23DWR
TCM129C23DWR by Texas Instruments is an Audio Codec with +-5V power supplies, 20 terminals, and A/MU-LAW companding law. It operates in synchronous/asynchronous mode and is ideal for PCM CODEC applications in industrial temperature environments.
ST5088DTR
ST5088DTR by STMicroelectronics is a programmable audio codec designed for synchronous operation. It features a compact 28-terminal package, operates b/w -25 °C to 70°C, and supports A/MU-LAW companding. Ideal for telecom applications, it ensures efficient audio processing.
TLV320AIC1103GQER
TLV320AIC1103GQER by Texas Instruments is an 80-terminal audio codec with 15-bit linear coding and A/MU-LAW companding law. It operates synchronously at a voltage of 3V, ideal for PCM codec applications in industrial temperature grades. The package style is grid array with very thin profile and fine pitch, making it suitable for compact designs.
MAX98089EWY+T
Analog Devices
Analog Devices' MAX98089EWY+T is an Audio Codec with 63 terminals in a rectangular grid array package. Operating from -40 to 85 °C, it features a nominal voltage of 1.8V and PCM CODEC telecom IC type. Ideal for industrial applications requiring fine pitch and thin profile components.
SGTL5000XNBA3R2
NXP Semiconductors' SGTL5000XNBA3R2 is a 32-terminal audio codec with synchronous operation, offering 2 channels and a max output voltage of 3.11V. Ideal for PCM codec applications in telecom ICs, this chip carrier has a very thin profile and operates b/w -40°C to 85°C.
ST5088D
ST5088D by STMicroelectronics is a 28-terminal audio codec with synchronous operation at 5V. It features A/MU-LAW companding law, small outline package style, and gull wing terminal form. Ideal for telecom applications requiring programmable codecs with filter and max supply current of 17mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI3000-KSR
SI3000-KSR by Silicon Labs is a small outline, surface mount audio codec with 16 terminals. It operates synchronously and has a temperature range of 0 to 70°C. This programmable codec is commonly used in telecom applications for audio processing.
SI3000-C-FS
SI3000-C-FS by Silicon Labs is a small outline, surface mount audio codec with 16 terminals. It operates synchronously and has a max temperature of 70°C. This programmable codec is commonly used in telecom applications for audio processing.
PROGRAMMABLE CODEC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI3000-C-GSR
PROGRAMMABLE CODEC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI3000-C-FSR
SI3000-C-FSR by Silicon Labs is a 16-terminal audio codec with synchronous operation. It features a small outline package, tin terminal finish, and operates at temperatures from 0 to 70°C. Ideal for telecom applications requiring programmable codecs with a supply voltage of 3.3V.
SI3000-X-FSR
SI3000-X-FS
Skyworks Solutions
SI3000-C-GS
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved