Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' MGM12P22F1024GA-V4R is a rectangular-shaped telecom IC with 3.3V supply voltage, operating from -40 to 85°C. It offers a data rate of 1 Mbps and is ideal for telecom circuit applications due to its special shape package design measuring 12.9mm in width and 17.8mm in length.
Median Price
$24.677
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Digiode
$27.522
Vyrian
Rotakorn
Nova Conductors
Ampacity Inc.
$24.620
Corphita
$26.073
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Rectangular package shape makes it easy to integrate this product into various electronic devices.
The special shape of the package adds uniqueness and potentially improves the aesthetic appeal of the product.
With a maximum operating temperature of 85°C, this product can perform reliably even in high-temperature environments.
The ability to operate at temperatures as low as -40°C makes this product suitable for a wide range of operating conditions.
The compact width of 12.9 mm enables this product to be used in space-constrained applications.
The moderate length of 17.8 mm strikes a balance between compactness and functionality in the design of this product.
Being a telecom circuit type IC, this product is optimized for communication applications, ensuring reliable and efficient data transmission.
The nominal supply voltage of 3.3V provides compatibility with a wide range of systems and power sources.
The high data rate of 1 Mbps allows for speedy transmission of data, making this product suitable for high-performance communication applications.
Other Function Telecom Interface ICs MGM12P22F1024GA-V4R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Position:
Width:
MGM12P22F1024GA-V4R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - MGM12Px 12/Oct/2022
PCN Assembly/Origin - Multi Dev 28/Sep/2022
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Changzhou Galaxy Century Microelectronics
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Fairchild Semiconductor
NXP Semiconductors
SA636DK/01
SA636DK/01 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3V, it features gull wing terminals and is designed for telecom circuit applications.
ESP32-D0WD
Espressif Systems (shanghai)
ESP32-D0WD by Espressif Systems is a telecom IC with 38 terminals, operating at -40 to 85°C. It has a data rate of 150 Mbps and operates at 3.3V supply voltage. This surface-mount rectangular package is ideal for automotive applications due to its compact size and high performance capabilities.
451-00001
Laird Technologies
Laird Technologies' 451-00001 is a telecom IC with 71 terminals, operating at -40 to 85°C. With a supply voltage of 3.3V, it supports data rates up to 2 Mbps. This surface-mount IC in rectangular package is ideal for telecom circuit applications.
PEF7072HLV16SLLHN
Intel
The Intel PEF7072HLV16SLLHN is a telecom interface IC with 64 terminals in a rectangular flatpack package. Its gull wing terminal form and quad position make it suitable for telecom circuit applications. This surface-mount device is made of plastic/epoxy, ideal for various telecommunications functions.
ATWILC1000-MR110UB
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-N28;
CC3135MODRNMMOBR
Texas Instruments
CC3135MODRNMMOBR by Texas Instruments is a telecom IC with 63 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm, suitable for industrial applications requiring reliable communication interfaces in compact spaces. With surface mount capability and nickel gold finish, it offers robust connectivity solutions in various electronic devices.
MCP2120T-I/SL
Microchip Technology
MCP2120T-I/SL by Microchip: Telecom IC with 14 terminals, operates at -40 to 85°C. CMOS tech, 5V supply, and 1.27mm terminal pitch. Ideal for telecom circuits in industrial settings due to TS16949 screening level.
ADL5391ACPZ-R7
Analog Devices
ADL5391ACPZ-R7 by Analog Devices is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 5V, it is ideal for telecom circuit applications requiring a very thin profile and quad terminal position.
WLR089U0-I/RM
Microchip Technology's WLR089U0-I/RM is a telecom IC with 12 Mbps data rate, operating at -40 to 85°C. It has 40 terminals in a rectangular package style for industrial use. Suitable for telecom interfaces, it offers a nominal voltage of 3.3V and surface-mount capability.
ADV7533BCBZ-RL
ADV7533BCBZ-RL by Analog Devices is a telecom IC with 49 terminals in a square grid array package. It operates b/w -10 to 85°C, with a peak reflow temperature of 260°C. This CMOS technology IC has a nominal voltage of 1.8V and is suitable for telecom circuit applications.
SA602AN
Philips Components
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Package Code: DIP; Terminal Pitch: 2.54 mm; Minimum Operating Temperature: -40 Cel; Maximum Seated Height: 4.2 mm;
MAX7044AKA-T
Maxim Integrated
MAX7044AKA-T by Maxim Integrated is a telecom IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 2.7V and low power consumption of 0.0257mA, suitable for automotive applications due to its CMOS technology and small form factor.
LM2893MX
National Semiconductor
LM2893MX by National Semiconductor is a telecom interface IC with 20 terminals, operating b/w -40 to 85°C. It has a supply voltage of 18V and max current draw of 79mA. Ideal for industrial applications requiring small outline packages and gull wing terminals.
TUSB211IRWBR
TUSB211IRWBR by Texas Instruments is a telecom IC with 480.24 Mbps data rate, operating at -40 to 85 °C. It features a 12-terminal chip carrier package suitable for industrial applications requiring a 3.3 V supply voltage and low current consumption of 0.02 mA.
ST25R3917-AQWT
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SJA1105ELY
NXP Semiconductors' SJA1105ELY is a telecom IC with AEC-Q100 screening. It features TIN SILVER COPPER terminal finish, 260°C peak reflow temp, and MSL of 3. Ideal for telecom circuit applications requiring high reliability in automotive environments.
CC2520RHDR
CC2520RHDR by Texas Instruments is a Telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. With a data rate of 0.25 Mbps and terminal pitch of 0.5 mm, it's ideal for telecom circuits requiring a 3V supply voltage.
XCC3135MODRNMMOBR
XCC3135MODRNMMOBR by Texas Instruments is a telecom IC with 63 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for industrial applications requiring telecom circuit interfaces.
WT32I-E-AI6IAP
Silicon Labs
Silicon Labs' WT32I-E-AI6IAP is a telecom IC with 50 terminals, operating from -40 to 85°C. Its compact rectangular package measures 15.9mm x 23.9mm with a low profile of 2.55mm, suitable for industrial applications requiring surface mount technology.
HMC980LP4ETR
Analog Devices' HMC980LP4ETR is a 24-terminal telecom IC with matte tin finish, operating b/w -40 to 85°C. It comes in a square chip carrier package style, suitable for industrial applications requiring a nominal voltage of 12V. The IC is surface mountable and has a terminal pitch of 0.5mm, making it ideal for telecom circuit designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM12P32F1024GE-V2
TELECOM CIRCUIT;
MGM12P02F1024GA-V2
MGM12P32F1024GA-V4
Silicon Labs' MGM12P32F1024GA-V4 is a TELECOM CIRCUIT IC with 3.3V supply voltage, 1 Mbps data rate, and operating temperatures from -40 to 85 °C. Its RECTANGULAR package shape makes it ideal for telecom interface applications.
MGM12P32F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-X; No. of Functions: 1;
MGM12P22F1024GA-V2
MGM12P32F1024GA-V2
MGM12P02F1024GE-V2
MGM12P32F1024GE-V4
Silicon Labs' MGM12P32F1024GE-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It has a rectangular package of 12.9mm width and 17.8mm length. Ideal for telecom circuit applications at a nominal voltage of 3.3V.
MGM13P12F512GA-V2
MGM12P32F1024GE-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
MGM12P02F1024GA-V4
Silicon Labs' MGM12P02F1024GA-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. Its package style is special shape, measuring 12.9mm in width and 17.8mm in length. Ideal for telecom applications requiring a nominal voltage of 3.3V.
MGM12P22F1024GA-V4
Silicon Labs' MGM12P22F1024GA-V4 is a rectangular-shaped telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It operates at 3.3V and measures 12.9mm in width and 17.8mm in length, suitable for telecom circuit applications.
MGM13P12F512GE-V2
Other Telecom ICs;
MGM12P02F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; No. of Functions: 1; Data Rate: 1 Mbps;
MGM13S12F512GA-V3R
MGM111A256V1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Code: XMA; Package Shape: RECTANGULAR;
MGM111A256V2
MGM12P02F1024GA-V2R
MGM12P02F1024GE-V4
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED; Length: 17.8 mm;
MGM12P22F1024GE-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Data Rate: 1 Mbps; Width: 12.9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved