Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$12.510
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Symmetry
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$11.884
Nova Conductors
$13.670
Chip Stock
Vyrian
Corohmni
$8.036
Andel Nordic
$9.191
$8.823
Ampacity Inc.
$10.630
Semicontronic
$10.364
$10.311
Corphita
$11.259
Aztec Data Supply Inc.
$15.820
AZTECH Wire
$19.697
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
ChipstoGo Electronic ltd
Other Function Telecom Interface ICs MGM12P02F1024GA-V2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
MGM12P02F1024GA-V2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Silicon Standard
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM358N
Kec
Signetics
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Baneasa S A
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Sangdest Microelectronics (Nanjing)
DA14531MOD-00F01002
Dialog Semiconductor
TELECOM CIRCUIT; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3;
RCB-F9T-0
U-blox Ag
BLUENRG-134
BLUENRG-134 by STMicroelectronics is a telecom IC with 34 terminals in a grid array package. Operating b/w -40°C to 105°C, it has a nominal voltage of 3V. With a very thin profile and fine pitch, it's ideal for industrial telecom applications.
TDA5210XUMA1
Infineon Technologies
TDA5210XUMA1 by Infineon is a telecom IC with 28 terminals, operating from -40 to 105°C. It features a small outline package style, tin terminal finish, and 5V supply voltage. Ideal for telecom circuits, it has a rectangular shape and thin profile suitable for industrial applications.
HMC624ALP4ETR
Analog Devices
Analog Devices' HMC624ALP4ETR is a 24-terminal CMOS telecom IC with a square chip carrier package. Operating from -40 to 85°C, it has a very thin profile and matte tin finish. Ideal for telecom circuits, this IC has a terminal pitch of 0.5mm and no lead terminal form.
EFR32BG22C222F352GM32-C
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
CYBLE-212006-01
Infineon Technologies' CYBLE-212006-01 is a surface mount telecom IC with 1 function. It has a rectangular package shape, 30 terminals, and a max seated height of 2mm. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications.
BGT24MR2E6327XUMA1
BGT24MR2E6327XUMA1 by Infineon is a Telecom IC with 32 terminals in a rectangular chip carrier package. Operating temperature ranges from -40 to 105°C, suitable for industrial use. It operates at 3.3V and features a thin profile design for telecom circuit applications.
WT32I-A-AI61IAP
Other Telecom ICs;
PCM3060PW
Texas Instruments
PCM3060PW by Texas Instruments is a 2-channel CMOS Telecom IC with 3.3V supply voltage. It comes in a small outline, thin profile package with 28 terminals and operates b/w -25 to 85°C. Ideal for telecom circuits, it features nickel palladium gold terminal finish and gull wing form factor for surface mount applications.
HTRC11001T/03EE,11
NXP Semiconductors
The NXP Semiconductors HTRC11001T/03EE,11 is a telecom interface IC with 1 function and 14 terminals. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 5V. This small outline package is suitable for industrial applications requiring reliable telecom circuitry.
MT9041AP
Mitel Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
TLV320AIC3104IRHBT
TLV320AIC3104IRHBT by Texas Instruments is a telecom interface IC with 2 channels and a nominal voltage of 1.8V. It has a package style of chip carrier, heat sink/slug, very thin profile and can operate in industrial temperature range (-40 to 85°C). This IC is commonly used in telecom circuits.
BLED112-V1
BLED112-V1 by Silicon Labs is a RECTANGULAR MICROELECTRONIC ASSEMBLY with an operating temperature range of -40 to 85°C. It is an INDUSTRIAL-grade TELECOM CIRCUIT suitable for various telecom interface applications.
ATA5551M-PPMY
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; Package Shape: UNSPECIFIED; Minimum Operating Temperature: -40 Cel; Terminal Position: UNSPECIFIED;
BQ51013ARHLR
BQ51013ARHLR by Texas Instruments is a telecom interface IC with 20 terminals in a chip carrier package. It operates b/w 0-125°C, has a supply voltage of 5V, and data rate of 0.002 Mbps. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and very thin profile package style.
ODIN-W260
ODIN-W260 by U-blox Ag is a TELECOM CIRCUIT with 3.3V supply, operating from -40°C to 85°C. RECTANGULAR MICROELECTRONIC ASSEMBLY package for telecom interfaces, ideal for various applications requiring reliable connectivity in extreme temperature conditions.
AD9874ABSTRL
AD9874ABSTRL by Analog Devices is a BICMOS TELECOM CIRCUIT with 48 terminals, operating at -40 to 85 °C. It has a PLASTIC/EPOXY body, suitable for telecom interfaces. The IC supports power supplies of 3/3.3V and 3/5V, with a compact FLATPACK package style.
CAM-M8Q-0
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ADRV9002BBCZ-RL
ADRV9002BBCZ-RL by Analog Devices is a telecom IC with 1 function. It has a package style of grid array, thin profile, and fine pitch. With an operating temperature range of -40 to 110 °C, it is suitable for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM12P32F1024GE-V2
MGM12P32F1024GA-V4
Silicon Labs' MGM12P32F1024GA-V4 is a TELECOM CIRCUIT IC with 3.3V supply voltage, 1 Mbps data rate, and operating temperatures from -40 to 85 °C. Its RECTANGULAR package shape makes it ideal for telecom interface applications.
MGM12P32F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-X; No. of Functions: 1;
MGM12P22F1024GA-V2
MGM12P32F1024GA-V2
MGM12P02F1024GE-V2
MGM12P32F1024GE-V4
Silicon Labs' MGM12P32F1024GE-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It has a rectangular package of 12.9mm width and 17.8mm length. Ideal for telecom circuit applications at a nominal voltage of 3.3V.
MGM13P12F512GA-V2
MGM12P32F1024GE-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
MGM12P02F1024GA-V4
Silicon Labs' MGM12P02F1024GA-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. Its package style is special shape, measuring 12.9mm in width and 17.8mm in length. Ideal for telecom applications requiring a nominal voltage of 3.3V.
MGM12P22F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 17.8 mm;
MGM12P22F1024GA-V4
Silicon Labs' MGM12P22F1024GA-V4 is a rectangular-shaped telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It operates at 3.3V and measures 12.9mm in width and 17.8mm in length, suitable for telecom circuit applications.
MGM13P12F512GE-V2
MGM12P02F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; No. of Functions: 1; Data Rate: 1 Mbps;
MGM13S12F512GA-V3R
MGM111A256V1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Code: XMA; Package Shape: RECTANGULAR;
MGM111A256V2
MGM12P02F1024GA-V2R
MGM12P02F1024GE-V4
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED; Length: 17.8 mm;
MGM12P02F1024GE-V2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved