Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Code: XMA; Package Shape: RECTANGULAR;
Median Price
$15.540
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$10.298
Bristol Electronics
$12.181
$10.232
Vyrian
Nova Conductors
ACDS - Activité Composants Distribution Service
Dan-Mar Components
AZTECH Wire
$0.620
$0.600
$0.580
$0.570
Ampacity Inc.
$9.210
Corphita
$9.756
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Other Function Telecom Interface ICs MGM111A256V1 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MGM111A256V1 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - MGM111-A 19/Jun/2018
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Vishay Telefunken
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Meritek Electronics
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ESP32-WROVER-E
Espressif Systems (shanghai)
ESP32-WROVER-E by Espressif Systems is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. With 3.3V supply voltage, it's ideal for industrial applications requiring high-speed wireless connectivity in compact form factor (31.4mm x 18mm).
SI4010-C2-GTR
Silicon Labs
SI4010-C2-GTR by Silicon Labs is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and uses CMOS technology. This small outline package is ideal for telecom circuit applications due to its industrial temperature grade and surface mount capability.
DA16200MOD-AAC4WA32
Dialog Semiconductor
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
SN65DSI83TPAPRQ1
SN65DSI83TPAPRQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 105°C, with a data rate of 1 Mbps and nominal voltage of 1.8V. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
WL1801MODGBMOCT
WL1801MODGBMOCT by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates at -20 to 70°C, with a supply voltage of 3.7V and data rate of 100 Mbps. Ideal for telecom circuits, it has a compact rectangular shape and surface-mount capability.
453-00006
Laird Technologies
453-00006 by Laird Technologies is a surface mount IC with 39 terminals, operating from -40 to 85°C. With a compact rectangular package style, it's ideal for telecom circuits requiring a 3V supply voltage. This industrial-grade IC has a peak reflow temp of 260°C and low seated height of 2.33mm, making it suitable for various telecom interface applications.
MD0101K6-G
Supertex
TELECOM CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 18; Package Code: HVSON; Package Shape: SQUARE; JESD-609 Code: e3;
TM1062DSB2
Inrcore
TELECOM CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP28,.5;
ST25R3914-AQWT
STMicroelectronics
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
LEA-M8S-0-10
U-blox Ag
Other Telecom ICs; Moisture Sensitivity Level (MSL): 4;
SA612AD/01
NXP Semiconductors
SA612AD/01 by NXP Semiconductors is a telecom IC with 8 terminals, operating from -40 to 85°C. It has a supply voltage of 6V and terminal pitch of 1.27mm. This small outline package is ideal for telecom circuit applications in industrial settings.
WL1837MODGIMOCR
Texas Instruments' WL1837MODGIMOCR is a telecom IC with 100 terminals, operating at -40 to 85°C. It has a supply voltage of 3.7V and supports data rates up to 100Mbps. This rectangular package with grid array style is ideal for industrial telecom applications.
WT32I-A-AI61IAP
Other Telecom ICs;
BM71BLES1FC2-0B02AA
Microchip Technology
BM71BLES1FC2-0B02AA by Microchip is a telecom IC with 16 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3V. It is a surface mount rectangular package suitable for industrial applications, offering data rate of 0.0086 Mbps.
NINA-B112
NINA-B112 by U-blox Ag is a telecom interface IC with a rectangular package shape and microelectronic assembly style. It operates in industrial temperature range (-40°C to 85°C) and has a nominal voltage of 3V. It is suitable for various telecom circuit applications.
WFM200S022XNA3
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
ODIN-W260-05B-00
CC2642R1FRGZT
CC2642R1FRGZT by Texas Instruments is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This surface-mount IC is ideal for industrial applications requiring very thin profile components.
OPA380AIDGKT
OPA380AIDGKT by Texas Instruments is a telecom interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 5V and low supply current of 0.008mA, suitable for automotive applications. The package is small outline, thin profile, with gull wing terminals and moisture sensitivity level of 2.
TLE8457BSJXUMA1
Infineon Technologies
TLE8457BSJXUMA1 by Infineon is a BICMOS technology telecom IC with 8 terminals in a small outline package. It operates at a nominal voltage of 8V and has a terminal pitch of 1.27mm. This AEC-Q100 screened IC is ideal for telecom circuit applications due to its compact size and gull wing terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM12P32F1024GE-V2
TELECOM CIRCUIT;
MGM12P02F1024GA-V2
MGM12P32F1024GA-V4
Silicon Labs' MGM12P32F1024GA-V4 is a TELECOM CIRCUIT IC with 3.3V supply voltage, 1 Mbps data rate, and operating temperatures from -40 to 85 °C. Its RECTANGULAR package shape makes it ideal for telecom interface applications.
MGM12P32F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-X; No. of Functions: 1;
MGM12P22F1024GA-V2
MGM12P32F1024GA-V2
MGM12P02F1024GE-V2
MGM12P32F1024GE-V4
Silicon Labs' MGM12P32F1024GE-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It has a rectangular package of 12.9mm width and 17.8mm length. Ideal for telecom circuit applications at a nominal voltage of 3.3V.
MGM13P12F512GA-V2
MGM12P32F1024GE-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
MGM12P02F1024GA-V4
Silicon Labs' MGM12P02F1024GA-V4 is a Telecom IC with 1 Mbps data rate, operating from -40 to 85°C. Its package style is special shape, measuring 12.9mm in width and 17.8mm in length. Ideal for telecom applications requiring a nominal voltage of 3.3V.
MGM12P22F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 17.8 mm;
MGM12P22F1024GA-V4
Silicon Labs' MGM12P22F1024GA-V4 is a rectangular-shaped telecom IC with 1 Mbps data rate, operating from -40 to 85°C. It operates at 3.3V and measures 12.9mm in width and 17.8mm in length, suitable for telecom circuit applications.
MGM13P12F512GE-V2
MGM12P02F1024GA-V4R
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; No. of Functions: 1; Data Rate: 1 Mbps;
MGM13S12F512GA-V3R
MGM111A256V2
MGM12P02F1024GA-V2R
MGM12P02F1024GE-V4
TELECOM CIRCUIT; Terminal Form: UNSPECIFIED; Package Code: XMA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED; Length: 17.8 mm;
MGM111A256V1R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved