Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EFR32BG1V132F256GM32-C0 by Silicon Labs is a 32-terminal telecom IC with a nominal voltage of 3.3V. It operates in industrial temperature range (-40 to 85°C) and has a compact square package style (5x5mm). Ideal for telecom circuit applications requiring surface mount compatibility and low profile design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Bas Electronics GmbH & Co. KG
AZTECH Wire
$1.770
$1.700
$1.670
$1.630
Advanced Electronics
$6.983
Corohmni
$9.150
Ampacity Inc.
$630.000
Argo Parts USA
Corphita
Continental Prestige Electronics
Aranea Global
Surface mount allows for easy and efficient assembly onto PCBs, saving time and effort during manufacturing.
The square package shape helps with space-saving on the PCB and allows for efficient layout.
With 32 terminals, this product offers a sufficient number of connections for various telecom interface applications.
The combination of chip carrier, heat sink/slug, and very thin profile package styles provides good thermal management and compact design.
With a high maximum operating temperature, this product can withstand challenging environmental conditions.
The wide range of operating temperatures allows for operation in both cold and hot environments.
Matte tin terminal finish offers good solderability and corrosion resistance.
Quad terminal position allows for easy connections and helps in efficient routing of signals.
With a low seated height, this product can be used in applications where space is a constraint.
The compact width of 5 mm enables high-density integration on the PCB.
With a short reflow time, this product can be quickly and effectively soldered onto the PCB.
The high peak reflow temperature can ensure proper soldering and reliability of the connections.
The length of 5 mm complements the compact design of this product.
Industrial temperature grade ensures reliable performance in harsh industrial environments.
No lead terminal form is environmentally friendly and complies with regulations.
Designed specifically for telecom applications, this product offers optimized performance and functionality.
The nominal supply voltage of 3.3 V is commonly used in telecom applications, making this product compatible with existing systems.
With a fine terminal pitch of 0.5 mm, this product allows for high-density mounting and efficient signal routing.
MSL 2 indicates that this product has a moderate level of moisture sensitivity, suitable for a wide range of storage and operating conditions.
Other Function Telecom Interface ICs EFR32BG1V132F256GM32-C0 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
EFR32BG1V132F256GM32-C0 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EFR32BG1 EOL 12/Nov/2018
PCN Design/Specification - EFR32BG1 12/Dec/2017 EFR32MG1/EFR32BG1/EFR32FG1 25/Jun/2018
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
First Components International
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
U2270B-MFPY
Atmel
U2270B-MFPY by Atmel is a telecom interface IC with 1 function. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 105 °C. It is commonly used in telecom circuits for various applications.
ODIN-W262-06B
U-blox Ag
Other Telecom ICs;
RN4871-V/RM118
Microchip Technology
RN4871-V/RM118 by Microchip Tech is a TS 16949-certified IC with 16 terminals, operating at -20 to 70°C. It's a telecom circuit with 3V supply voltage, supporting data rates up to 0.01 Mbps. Ideal for applications requiring compact size and surface mount compatibility.
BGS12PN10E6327XTSA1
Infineon Technologies
BGS12PN10E6327XTSA1 by Infineon is a Telecom IC with CMOS technology, operating b/w -30°C to 85°C. It features a 10-terminal chip carrier package with very thin profile, suitable for telecom circuit applications. With a nominal voltage of 2.85V and compact dimensions of 1.5mm x 1.1mm, it's ideal for space-constrained designs requiring surface mount compatibility.
BL652-SA-01-T/R
Laird Technologies
BL652-SA-01-T/R by Laird Technologies is a surface mount telecom IC with 39 terminals. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 3.3V and compact dimensions of 14x10x2.2mm, making it ideal for telecom circuit applications.
NEO-M9V-20B
NEO-M9V-20B by U-blox Ag is a telecom IC with AEC-Q100 screening, operating from -40 to 85°C. It features 24 terminals in a rectangular package measuring 12.2mm x 16mm. Ideal for applications requiring a 3V supply voltage and surface mount compatibility.
ATWILC1000-MR110UB
ATWILC1000-MR110UB by Microchip Technology is a surface mount telecom interface IC with 1 function. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 72.2 Mbps. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
450-0177R
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
HMC1094LP3ETR
Analog Devices
Analog Devices' HMC1094LP3ETR is a telecom IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 3.3V and matte tin terminal finish, ideal for telecom circuit applications.
BGM111A256V21
Silicon Labs
BGM111A256V21 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial telecom circuit applications due to its compact size and temperature range.
SA606DK/01,112
NXP Semiconductors
SA606DK/01,112 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, with a supply voltage of 3V. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and Gull Wing form factor.
WL1837MODGIMOCR
Texas Instruments' WL1837MODGIMOCR is a telecom IC with 100 terminals, operating at -40 to 85°C. It has a supply voltage of 3.7V and supports data rates up to 100Mbps. This rectangular package with grid array style is ideal for industrial telecom applications.
AS3933-BQFT
Ams Ag
AS3933-BQFT by Ams Ag is a telecom IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It has a nominal voltage of 3V and terminal pitch of 0.65mm, ideal for telecom circuit applications.
CC2520RHDR
CC2520RHDR by Texas Instruments is a Telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. With a data rate of 0.25 Mbps and terminal pitch of 0.5 mm, it's ideal for telecom circuits requiring a 3V supply voltage.
DA14531-00000FX2
Dialog Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: BCC; Package Shape: RECTANGULAR;
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
DC-ME-01T-C
Digi International
DC-ME-01T-C by Digi International is a SERIAL DEVICE SERVER with 100 Mbps data rate, operating at -40 to 85°C. Its MICROELECTRONIC ASSEMBLY package style and NO LEAD terminal form make it ideal for telecom applications requiring a compact design and reliable connectivity.
WL1837MODGIMOCT
WL1837MODGIMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. It operates at temperatures from -40 to 85°C, with a supply voltage of 3.7V and data rate of 100 Mbps. Ideal for industrial applications requiring high-speed communication in compact spaces.
SIM68M
Simcom Wireless Solutions
SIM68M by Simcom Wireless Solutions is a telecom IC with 18 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial-grade applications. This surface-mount IC in rectangular package shape suits various telecom interface needs.
ZED-F9P-02B
The U-blox Ag ZED-F9P-02B is a GNSS module with 54 terminals, operating temperature range of -40 to 85°C. It is surface mountable and designed for industrial applications requiring precise positioning and timing accuracy. The TS 16949 screening level ensures high quality standards for telecom interfaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFR32BG22C224F512IM40-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
EFR32BG22C224F512GM40-C
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
EFR32BG22C222F352GM40-C
TELECOM CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C224F512IM32-C
TELECOM CIRCUIT;
EFR32BG22C222F352GM32-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
EFR32BG22C224F512GN32-C
TELECOM CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C222F352GN32-C
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e4;
EFR32BG13P632F512GM48-B
EFR32BG13P732F512GM48-B
EFR32BG12P432F1024GM48-B
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
EFR32BG1P332F256GJ43-C0
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 43; Package Code: VFBGA; Package Shape: RECTANGULAR;
EFR32BG21A010F1024IM32-B
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1V132F256GJ43-C0
EFR32BG13P532F512GM48-B
EFR32BG21A010F512IM32-B
EFR32BG21A010F512IM32-B by Silicon Labs is a Telecom IC with 2 Mbps data rate, operating at -40 to 125 °C. It features a square shape, 32 terminals, and automotive temperature grade. Ideal for telecom applications requiring low power consumption and high-speed data transmission.
EFR32BG12P432F1024GL125-B
EFR32BG13P732F512GM32-D
EFR32BG13P732F512GM32-D by Silicon Labs is a telecom IC with 48 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3, suitable for industrial applications requiring a compact chip carrier package with very thin profile and no-lead terminal form.
EFR32BG13P732F512GM48-D
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1B232F256GJ43-C0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved