Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$1.250
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$1.375
FIFO 72801L25TFGI attributes and parameters. Explore more FIFO devices from Renesas Electronics
Maximum Access Time:
Maximum Clock Frequency (fCLK):
Cycle Time:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Enable:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
72801L25TFGI Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diodes Incorporated
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SN74V293-6PZA
SN74V293-6PZA by Texas Instruments is a FIFO memory with 64Kx18 organization, operating at 166 MHz with a cycle time of 6 ns. It features synchronous operation and 3-STATE output characteristics, suitable for applications requiring fast data transfer and storage in commercial-grade environments.
CD74HCT40105M
Harris Semiconductor
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 5.5 V;
72V275L15PFGI8
Integrated Device Technology
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Peak Reflow Temperature (C): 260;
72V275L15PFG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Technology: CMOS;
SN74ABT3613PQ
SN74ABT3613PQ by Texas Instruments is a FIFO with 64x36 organization, operating at 5V. It has a cycle time of 15ns and max access time of 10ns, suitable for synchronous applications. This PLASTIC/EPOXY package with GULL WING terminals is ideal for commercial temperature grade environments.
IDT72V255LA15TFI8
IDT72V255LA15TFI8 by Integrated Device Technology is a FIFO memory with 8Kx18 organization, operating at 66.7 MHz clock frequency and 15 ns cycle time. Suitable for industrial applications, it features synchronous operation, parallel interface, and a low profile flatpack package.
SN74ACT7204L35NP
SN74ACT7204L35NP by Texas Instruments is a 4Kx9 FIFO with CMOS technology. It operates asynchronously at 5V, has a memory density of 36864 bits, and supports parallel data transfer. This rectangular package with 28 terminals is ideal for commercial applications requiring fast and efficient data storage and retrieval.
7203L15JI
7203L15JI by Integrated Device Technology is a FIFO chip carrier with 2Kx9 organization, operating at 40MHz clock frequency. It has a cycle time of 25ns and can handle temperatures from -40 to 85°C. Ideal for industrial applications requiring fast asynchronous data storage and retrieval.
SN74ABT7819A-10PH
SN74ABT7819A-10PH by Texas Instruments is a 512Kx18 BI-DIRECTIONAL FIFO with 10ns cycle time, operating at up to 100MHz clock frequency. It features synchronous operation, parallel interface, and GULL WING terminals. Ideal for applications requiring fast data transfer and memory management in commercial-grade environments.
IDT7202LA25PI
IDT7202LA25PI by Integrated Device Technology is a FIFO memory with 1KX9 organization, 35 ns cycle time, and 28.5 MHz clock frequency. It operates in asynchronous mode and is suitable for industrial applications requiring fast data storage and retrieval. The memory IC type is Other FIFO with a memory density of 9216 bit, making it ideal for high-speed parallel data processing tasks.
72V255LA15PFGI8
Renesas Electronics
The Renesas Electronics 72V255LA15PFGI8 FIFO features a cycle time of 15ns, operating in synchronous mode with a supply voltage of 3.3V. With an organization of 8Kx18 and memory density of 147456 bits, it is ideal for industrial applications requiring fast access times and parallel operation.
CY7C421-20JXC
Cypress Semiconductor
CY7C421-20JXC by Cypress Semiconductor is a FIFO chip with 512x9 organization, operating at 33.33 MHz clock frequency. It has a cycle time of 30 ns and operates in asynchronous mode. This chip is commonly used in applications requiring fast data storage and retrieval, such as networking devices and communication systems.
SN74ACT72235-30FN
SN74ACT72235-30FN by Texas Instruments is a FIFO chip with 1KX9 organization, 30.3 ns cycle time, and 5V nominal voltage. It is used in applications requiring synchronous operation, such as data buffering and communication systems. The chip comes in a square plastic/epoxy package with 44 terminals for surface mount installation.
SN54ACT7881HV
SN54ACT7881HV by Texas Instruments is a 1Kx18 FIFO with 20ns cycle time, operating at 5V. It features synchronous operation, parallel interface, and output enable function. Ideal for military applications due to its wide temperature range (-55 to 125 °C) and ceramic package body material.
72V821L20PFG8
FIFOs; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Length: 14 mm;
7204L15PDGI
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; No. of Words Code: 4K;
IDT7201LA25SOI8
Rochester Electronics
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 4.5 V;
SN74ACT2235-60FNR
SN74ACT2235-60FNR by Texas Instruments is a FIFO chip with 1Kx9 organization, operating at 60 ns cycle time. It features 3-STATE output characteristics and operates in parallel mode. This chip is commonly used in applications requiring fast data storage and retrieval with a memory density of 9216 bits.
1M7806-40DLG4
1M7806-40DLG4 by Texas Instruments is a FIFO memory with 256x18 organization, 40ns cycle time, and 50MHz clock frequency. Ideal for applications requiring fast synchronous data storage and retrieval in commercial temperature environments.
SN54ALS233AFK
SN54ALS233AFK by Texas Instruments is a 16x5 FIFO chip carrier with 40ns cycle time, operating at 25MHz clock frequency. Suitable for military applications due to its -55 to 125°C temperature range and synchronous operation mode. It features a 3-STATE output and NO LEAD terminal form for parallel data processing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7280L20PA
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
72801L15PFG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Maximum Access Time: 10 ns;
72801L15TFGI
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Package Equivalence Code: QFP64,.47SQ,20;
72801L25TFG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; No. of Words Code: 256;
72801L15TFG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Memory Density: 2304 bit;
72801L25TFGI8
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Package Style (Meter): FLATPACK, LOW PROFILE, FINE PITCH;
72801L10PFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Memory Width: 9;
72801L15PFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Terminal Pitch: .8 mm;
72801L15TFGI8
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
72801L25PFG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Parallel or Serial: PARALLEL;
72801L25PFGI8
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Maximum Access Time: 15 ns;
72801L15PFGI8
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Organization: 512X9;
72801L25TFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Terminal Position: QUAD;
72801L10TFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Organization: 256X9;
72801L25PFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 5.5 V;
72801L15TFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 5.5 V;
72801L10PFG
72801L10TFG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Minimum Supply Voltage (Vsup): 4.5 V;
72801L15PFGI
BI-DIRECTIONAL FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Maximum Seated Height: 1.6 mm;
72801L25TFISCDS-W
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Output Enable: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved