Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cellular Telephone Circuits; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
Median Price
$3.030
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.460
1k+ parts
$1.600
10k+ parts
$1.545
Mouser Electronics
$1.270
Rochester
-
$3.790
$3.390
$3.190
Vyrian
Nova Conductors
AZTECH Wire
$18.010
$17.300
$16.950
$16.610
GreenTree Electronics
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Cellphone ICs QPF4288TR13-5K attributes and parameters. Explore more Cellphone ICs devices from Qorvo
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Your car. Your smartphone. Your wrist. Your heart. Even outer space. Qorvo products are at work connecting, protecting and powering the planet. We bring core radio frequency (RF) and power technologies and solutions to mobile, infrastructure, the IoT, defense/aerospace and power management markets. Transforming the way you live, work, play and communicate — that's what inspires us. Innovation. Product Leadership. Scale. Speed. At Qorvo, we are driven by the possibility of discovery — of new RF and power technologies and advancements in design, manufacturing and communications that make the world a better, cleaner and more connected place. We've been working on that for more than 30 years, both as innovators and as stewards of our planet. And we are just getting started.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Promax-johnton
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
HMC689LP4TR
Analog Devices' HMC689LP4TR is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, suitable for industrial applications. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom systems.
MAX2031ETP/-T
MAX2031ETP/-T by Analog Devices is a Cellphone IC with 20 terminals, operating at -40 to 85 °C. It features BICMOS technology, RF and baseband circuit for telecom applications, and requires 5V supply voltage with a max current of 0.1mA.
CC2420RGZT
CC2420RGZT by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a supply voltage of 1.8/3.3V and telecom IC type for RF and baseband circuits. The package style includes chip carrier, heat sink/slug in a square shape suitable for industrial applications.
CC1111F32RSPRG3
The Texas Instruments CC1111F32RSPRG3 is a cellphone IC with 36 terminals in a square chip carrier package. Operating at temperatures from 0 to 85°C, it features RF and baseband circuit technology with a supply voltage of 3V. Ideal for telecom applications, this IC has a terminal pitch of 0.5mm and is surface mountable.
TCM8002FR
Texas Instruments TCM8002FR is a cellphone IC with 44 terminals, operating at -40 to 85°C. It features a supply voltage of 3.3V/5V and CMOS technology, suitable for baseband circuit applications in the telecom industry. The package is a square flatpack measuring 10x10mm with Gull Wing terminals, ideal for surface mount assembly.
AT86RF233-ZFR
Atmel
RF AND BASEBAND CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
AD6654CBCZ
AD6654CBCZ by Analog Devices is a Cellphone IC with 256 terminals in a square grid array package. It operates b/w -25°C to 85°C, with a nominal voltage of 1.8V. This BASEBAND CIRCUIT Telecom IC is designed for surface mount applications in mobile devices.
NRF9160-SIBA-B1A-R7
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIBA-B1A-R7 is a CELL IC with RF & baseband circuit. It operates in industrial temp range (-40 to 85°C) with 3.8V supply voltage. This surface-mountable chip has 127 terminals, rectangular shape, and grid array package suitable for cellphone applications.
SI4721-B20-GMR
Silicon Labs
Silicon Labs' SI4721-B20-GMR is a cellphone IC with 20 terminals in a square chip carrier package. Operating b/w -20°C to 85°C, it features RF and baseband circuits for telecom applications. With a nominal voltage of 3.3V, this IC has a compact size of 3x3mm suitable for surface mount designs.
TRF4903PWRG4
TRF4903PWRG4 by Texas Instruments is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a supply voltage of 2.7V and low current consumption of 0.043mA. Ideal for RF and baseband circuits in telecom applications due to its compact size and dual terminal position.
CC1150-RTR1
CC1150-RTR1 by Texas Instruments is a cellphone IC with 16 terminals in a square package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.65mm, making it suitable for industrial telecom applications.
ADF4360-9BCPZRL7
Analog Devices' ADF4360-9BCPZRL7 is a cellphone IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it comes in a square chip carrier package style with matte tin finish and very thin profile.
SI4713-B30-GM
SI4713-B30-GM by Silicon Labs is a Cellphone IC with 20 terminals in a square package. It operates b/w -20°C to 85°C, suitable for RF and baseband circuits. With a compact size of 3x3mm and CMOS technology, it's ideal for mobile phone applications.
ADF7901BRUZ
Analog Devices' ADF7901BRUZ is a cellphone IC with 24 terminals in a small outline package. It operates at 3V, suitable for RF and baseband circuits, with a temperature range of 0-50 °C. The device has a matte tin finish, gull wing terminal form, and shrink pitch package style.
NRF24L01
NRF24L01 by Nordic Semiconductor Asa is a cellphone IC with 20 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With RF and baseband circuitry, it has a nominal voltage of 3V, making it ideal for wireless communication applications.
SARA-R412M-02B-03
U-blox Ag
SARA-R412M-02B-03 by U-blox Ag is a Cellphone IC with RF and baseband circuit. It operates at -20 to 65°C, with a supply voltage of 3.8V. Suitable for telecom applications due to its compact size and grid array package style.
AD6432AST
AD6432AST by Analog Devices is a Cellphone IC with 44 terminals, operating at -25 to 85 °C. It has a supply voltage of 3/3.3 V and uses BIPOLAR technology for BASEBAND CIRCUIT applications in telecom devices. The package is SQUARE, FLATPACK, LOW PROFILE made of PLASTIC/EPOXY with GULL WING terminals.
CC1110F8RSP
CC1110F8RSP by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. This RF and baseband circuit has a nominal voltage of 3V and terminal pitch of 0.5mm, ideal for telecom devices.
CC1020RSS
The Texas Instruments CC1020RSS is a cellphone IC with 32 terminals in a square package. It operates at temperatures from -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.65mm, making it suitable for industrial telecom applications.
LLCC68IMLTRT
Semtech
Semtech's LLCC68IMLTRT is a cellphone IC with 24 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, with matte tin finish and 3.3V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its compact size (4x4mm) and quad terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QPF4288SQ
Qorvo
QPF4288SB
Cellular Telephone Circuits; Terminal Finish: GOLD OVER NICKEL; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
QPF4288SR
Cellular Telephone Circuits; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved