Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
QSB363ZR by Onsemi is a 1.9mm ROUND PHOTO TRANSISTOR with peak wavelength of 940nm. It operates b/w -25°C to 85°C, with max power dissipation of 0.075W. Ideal for IR applications due to its min collector-emitter breakdown voltage of 30V and surface mounting feature.
Median Price
$0.328
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.233
100+ parts
$0.221
1k+ parts
10k+ parts
-
Mouser Electronics
$0.460
$0.226
$0.171
$0.140
DigiKey
$0.480
$0.235
$0.172
$0.160
Newark
$0.486
$0.251
$0.211
EBV Elektronik
Arrow
$0.451
$0.260
Verical
$0.297
Farnell
$0.192
$0.137
Element14
$0.236
Rochester
$0.147
$0.122
$0.109
Digiode
$0.114
Nova Conductors
$0.224
Ozdisan Elektronik
$0.303
Flip Electronics
Chip Stock
NAC Semi
$0.450
Vyrian
IBS Electronics
$0.127
$0.124
QIE Inc.
PC Components Company LLC
Bristol Electronics
Semicontronic
$0.102
$0.099
Corphita
$0.108
Corohmni
$0.120
Argo Parts USA
$0.215
Ampacity Inc.
$0.222
Netroflash
$0.213
$0.208
Aztec Data Supply Inc.
$0.225
Advanced Electronics
Continental Prestige Electronics
$0.491
$0.149
$0.136
Perfect Parts
Eastek
$0.463
Kepictronics
Metaverse IC Inc.
A-Z Elektronik GmbH
Lixinc
Kulean Microsystems
SupplyDigital Components
Authorized Procurement Solutions
CPlus Electronics
Problanco Electronics
TANS Electronics
Supply Digital
Assy Fe
UHIMA Technologies
Simplified design for easy integration and use.
Compact size allows for versatile placement and integration in various devices.
Optimal wavelength for efficient light detection and sensitivity.
Offers high sensitivity and fast response for accurate light detection.
Ensures reliable performance in a wide range of operating conditions.
Suitable for use in both low and high-temperature environments.
Provides a durable and reliable finish for long-term usability.
Efficient power usage for energy-saving operation.
Consistent light current for accurate light sensing and detection.
Low dark current ensures minimal noise in low-light conditions.
Allows for detection of infrared light, expanding the range of detectable light.
Provides protection against voltage surges for increased reliability.
Easy installation on PCBs for streamlined manufacturing processes.
Phototransistors QSB363ZR attributes and parameters. Explore more Phototransistors devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Maximum Dark Current:
Infrared (IR) Range:
JESD-609 Code:
Nominal Light Current:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Maximum Power Dissipation:
Shape:
Size:
Sub-Category:
Terminal Finish:
QSB363ZR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.70.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FLD00030
Onsemi
The Onsemi FLD00030 is a single phototransistor with peak wavelength of 630nm. It operates b/w -40 °C to 85°C, with collector-emitter breakdown voltage of 6V. Ideal for light sensing applications due to its nominal light current of 1.1mA and low dark current of 100nA.
SPS103C
The Onsemi SPS103C is a phototransistor with peak wavelength of 900nm, max temp of 100 °C, and dark current of 100nA. Ideal for applications requiring through hole mounting, it has a max power dissipation of 0.05W and on-state current of 0.02A.
BPT-BP1A34
Yellow Stone
PHOTO TRANSISTOR; Maximum Dark Current: 100 nA; Shape: ROUND; Infrared (IR) Range: YES; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE;
VEMT2520X01
Vishay Intertechnology
Vishay Intertechnology's VEMT2520X01 is a 1.8mm phototransistor with peak wavelength of 850nm. Operating b/w -40°C to 100°C, it has a max power dissipation of 0.1W and nominal light current of 6mA. Ideal for applications requiring IR detection in compact setups using surface mount technology.
SD2440-003
Micro Switch
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Dark Current: 100 nA; Maximum Power Dissipation: .125 W;
SFH3710
Osram Opto Semiconductors
Osram Opto Semiconductors SFH3710 is a single phototransistor with peak wavelength of 570nm. It has max operating temp of 85°C and min of -40°C. Ideal for surface mount applications, it features max on state current of 0.02A and nominal light current of 0.0025mA.
OP800A
Optek Technology
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 890; Minimum Collector-emitter Breakdown Voltage: 30 V; No. of Functions: 1; Shape: ROUND;
TPS622(B,F)
Toshiba
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Shape: ROUND; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -25 Cel;
KDT00030
The Onsemi KDT00030 is a single phototransistor with peak wavelength of 630nm. It operates b/w -40 °C to 85°C, with nominal light current of 0.01mA and max dark current of 100nA. Ideal for applications requiring rectangular shape optoelectronic components in compact size.
BPX38-2
Infineon Technologies
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum On State Current: .05 A; Minimum Operating Temperature: -40 Cel;
TPS617-C
PHOTO DARLINGTON; Additional Features: HIGH SENSITIVITY; SIDE VIEW; Maximum Dark Current: 250 nA; No. of Functions: 1; Minimum Collector-emitter Breakdown Voltage: 30 V; Shape: ROUND;
TIL81
Texas Instruments
TIL81 by Texas Instruments is a phototransistor with peak wavelength of 900nm. It has max operating temp of 125°C and min of -60°C. With max power dissipation of 0.25W, it's ideal for applications requiring fast response time such as light sensing in industrial automation.
BPX38-3
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .000012 s; Peak Wavelength (nm): 870; Minimum Operating Temperature: -40 Cel;
TPS625
PHOTO DARLINGTON; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Size: 1.5 mm; Nominal Light Current: 2 mA; Shape: ROUND;
SD5443-004
Honeywell Sensing And Control
SD5443-004 by Honeywell is a PHOTO TRANSISTOR with max operating temp of 125°C and min of -55°C. It has a max power dissipation of 0.15W, dark current of 100nA, and response time of 0.000015s. Ideal for optoelectronic applications requiring through hole mounting.
LS602
LS602 by Texas Instruments is a single phototransistor with peak wavelength of 900nm. It operates b/w -60°C to 125°C, with max power dissipation of 0.05W. Ideal for applications requiring fast response time and IR detection in through-hole mounting configurations.
QSD122
Qt Optoelectronics
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Collector-emitter Breakdown Voltage: 30 V; Peak Wavelength (nm): 880; Infrared (IR) Range: YES;
SD1440-003L
SD1440-003L by Honeywell is a phototransistor with max temp of 125°C, min temp of -55°C, and max power dissipation of 0.075W. It has a max dark current of 100nA and response time of 0.000015s. Ideal for applications requiring through hole mounting in various industries.
SFH313-3
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0;
PT91-21C/TR7
Everlight Electronics
The Everlight Electronics PT91-21C/TR7 is a 1.9mm phototransistor with peak wavelength of 940nm. It operates b/w -25°C to 85°C, with nominal light current of 1.5mA and max dark current of 100nA. Ideal for applications requiring IR detection and collector-emitter breakdown voltage of at least 30V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QSB363ZR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; Maximum Dark Current: 100 nA;
QSB363.ZR
QSB363.ZR by Qt Optoelectronics is a 1.9mm ROUND PHOTO TRANSISTOR with max operating temp of 85°C and min of -40°C. It has 0.7mA light current, 100nA dark current, and 30V breakdown voltage. Ideal for applications requiring precise light sensing in compact spaces.
QSB363
QSB363 by Onsemi is a single configuration phototransistor with a size of 1.9 mm. It operates at temperatures ranging from -25 to 85 °C and has a peak wavelength of 940 nm. It is commonly used in applications requiring infrared sensing or detection.
PHOTO TRANSISTOR; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 880; Maximum Dark Current: 100 nA; Configuration: SINGLE;
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Shape: ROUND; Additional Features: DAY LIGHT FILTER; JESD-609 Code: e3;
QSB320F
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; Maximum Dark Current: 200 nA; Maximum Operating Temperature: 100 Cel;
QSB320TR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Power Dissipation: .165 W; Additional Features: HIGH SENSITIVITY; No. of Functions: 1;
QSB363C
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Infrared (IR) Range: YES; Minimum Operating Temperature: -25 Cel; No. of Functions: 1; Nominal Light Current: 1.5 mA;
QSB363GR
QSB363GR by Onsemi is a single phototransistor with peak wavelength of 940nm. It operates b/w -25°C to 85°C, with max power dissipation of 0.075W. Ideal for IR applications due to its min collector-emitter breakdown voltage of 30V and nominal light current of 1.5mA.
QSB363YR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Functions: 1; Maximum Power Dissipation: .075 W; Nominal Light Current: 1.5 mA;
QSB363C.YR
PHOTO TRANSISTOR; Nominal Light Current: 1.5 mA; Maximum Dark Current: 100 nA; Configuration: SINGLE; No. of Functions: 1; Size: 1.9 mm;
QSB363CGR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Shape: ROUND; Maximum Operating Temperature: 85 Cel; Nominal Light Current: 1.5 mA;
QSB363CYR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; Nominal Light Current: 1.5 mA; Minimum Operating Temperature: -25 Cel;
QSB363CZR
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Nominal Light Current: 1.5 mA; Size: 1.9 mm;
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Size: 1.9 mm; Configuration: SINGLE;
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .075 W; Shape: ROUND; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved