Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF6001MUT2G by Onsemi is a 6-function data line filter with 30 dB attenuation at 800 MHz. Rated for 5V, it has a max operating temperature of 85 °C and min of -40°C. Ideal for applications requiring noise filtering in data transmission systems.
Median Price
$0.132
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.117
100+ parts
$0.110
1k+ parts
-
10k+ parts
Farnell
$0.109
Rochester
$0.159
DigiKey
$0.200
Verical
$0.147
Chip1Stop
$0.063
Digiode
$0.060
Vyrian
Chip Stock
Lantek
DigiKey Marketplace
$0.140
Bristol Electronics
$0.225
$0.135
$0.061
Microfarads
J2 Sourcing AB
Corphita
$0.057
Corohmni
GreenTree Electronics
Continental Prestige Electronics
Assy Fe
Perfect Parts
SupplyDigital Components
Problanco Electronics
TANS Electronics
UHIMA Technologies
Kulean Microsystems
Authorized Procurement Solutions
Having IEC approval ensures that the product meets international standards for safety and quality.
Having multiple functions allows for more versatile use in different applications.
Suitable for use with devices that operate at 5 volts, making it compatible with a wide range of electronics.
Designed specifically for filtering data lines, providing effective noise reduction and signal quality improvement.
High level of attenuation helps in reducing electromagnetic interference, resulting in better performance of connected devices.
Can operate efficiently in high temperature environments, ensuring reliability under varying conditions.
Can withstand low temperatures, making it suitable for use in different climates or applications.
Tin finish provides good conductivity and corrosion resistance, enhancing the durability and longevity of the product.
High frequency attenuation capability allows for effective filtering of noise across a wide range of frequencies.
Compact size makes it easy to integrate into existing systems without taking up much space.
Low resistance ensures efficient signal transmission with minimal loss, maintaining the integrity of data lines.
Matches the impedance of standard data lines, preventing signal reflections and ensuring optimal performance.
Surface mount design simplifies installation and allows for easy integration into circuit boards or devices.
Plastic packaging provides good insulation and protection for the components inside, maintaining product integrity.
Provides effective filtering of high frequency noise, ensuring clean and stable power delivery to connected devices.
Data Line Filters NUF6001MUT2G attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Maximum Attenuation Frequency:
Attenuation At Maximum Frequency:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Rated Voltage:
Sub-Category:
Terminal Finish:
Width (mm):
NUF6001MUT2G Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 22/Dec/2017
PCN Assembly/Origin - DFN Pkg Filters 18/Jun/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1554216004
Molex
WIRE AND CABLE;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Rectron
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
EU2B-YS3103F
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
M-FIAM9HN1
Vicor
Vicor's M-FIAM9HN1 is a 36V, 18A data line filter module with 9 terminals. Operating from -40 to 100°C, it offers TIN LEAD finish and panel mount installation. Ideal for applications requiring high current filtering in compact spaces.
744232090
Wuerth Elektronik & Kg
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
USBUF02W6
USBUF02W6 by STMicroelectronics is a DATA LINE FILTER with 6 terminals, UL approved, and MIL-STD-883E screened. It has a max operating temperature of 125°C and min of -40°C. With a capacitance of 100uF, it is ideal for data line filtering applications in various electronic devices.
MPZ2012S102AT000
TDK
The TDK MPZ2012S102AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. It has a DC resistance of 0.15 ohm, output impedance of 1000 ohm, and rated current of 1.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
NFM18CC223R1C3D
Murata Manufacturing
Murata Manufacturing's NFM18CC223R1C3D is a data line filter with 1 function, rated for 16V and 1A. Featuring FEED THROUGH CAPACITOR type, it offers high insulation resistance of 1000 Mohm. Ideal for applications requiring filtering in compact spaces with temperatures ranging from -55 to 125°C.
742792114
Wurth Elektronik 742792114 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 50 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.
MPZ1608S101ATAH0
The TDK MPZ1608S101ATAH0 is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm and a max frequency of 100MHz. Ideal for noise suppression in electronic circuits requiring impedance of 100 ohms at frequencies above 100MHz.
FLT007A0-SRZ
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Approvals (V): UL; CSA; VDE; Packing Method: BAG; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
BLM18SG331TN1D
BLM18SG331TN1D by Murata is a chip bead data line filter with 2 terminals, rated for 1A current. It operates b/w -55°C to 125°C, offering an output impedance of 330 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in a 0603 case is ideal for surface mount applications in various electronic devices.
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
IP4256CZ5-W,115
NXP Semiconductors
NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.
BLM15AX221SN1D
BLM15AX221SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L1.0XB0.5XH0.5 (mm) and is commonly used in surface mount applications for impedance matching and noise suppression in data lines.
FBMJ1608HS220NTR
Taiyo Yuden
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
BKP1608HS121-T
BKP1608HS121-T by Taiyo Yuden is a 0603 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 85°C and min freq of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 120 ohm.
MPZ2012S300ATD25
MPZ2012S300ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C, with dimensions of L2.0xB1.25xH0.85 (mm). Ideal for applications requiring a rated current of 6A and output impedance of 30 ohms in surface mount configurations.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
ILHB1206ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 6 A; Width (mm): 1.6; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel;
ILHB0603RK600V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.
742792095
Wurth Elektronik 742792095 is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It operates b/w -55 to 125 °C, with dimensions of L2.0xB1.2xH0.9 (mm). Featuring a max frequency of 100 MHz and output impedance of 2700 OHM, it has a DC resistance of 0.6 ohm and rated current of 0.2 A.
2744041447
Fair-rite Products
Fair-rite Products' 2744041447 is a surface mount FERRITE BEAD filter with dimensions of L5.6xB5xH2.85 (mm). It operates b/w -55 to 125 °C, has a max frequency of 250 MHz, and output impedance of 33 OHM. Ideal for data line filtering applications due to its encapsulated construction and rated current of 5 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF6400MNTBG
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Length: 3 mm; Packing Method: TAPE AND REEL; Approvals (V): IEC; Terminal Finish: NICKEL PALLADIUM GOLD;
NUF6401MNT1G
NUF6401MNT1G by Onsemi is a 5V data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C, DC resistance of 115 ohm, and output impedance of 50 ohm. Ideal for IEC-approved applications requiring surface mount filters with dimensions L3.0XB1.35XH1.0 (mm).
NUF6005MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -40 Cel; No. of Terminals: 12; Package Material: PLASTIC;
NUF6010MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; No. of Terminals: 12; Capacitance: 14 uF; Package Material: PLASTIC; Output Impedance (ohm): 50 OHM;
NUF6105FCT1
NUF6105FCT1 by Onsemi is a 6-function data line filter with 35 dB attenuation at 800 MHz. Rated for 5V, it has a max DC resistance of 120 ohm and output impedance of 50 ohm. Ideal for applications requiring noise filtering in data lines, it operates b/w -40 to 85°C temperatures.
NUF6105FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Approvals (V): IEC; Rated Voltage: 5 V; Height: .7 mm; Mounting Type: SURFACE MOUNT;
NUF6106FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Length: 2.96 mm; Width (mm): 1.33; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
NUF6106FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Dimensions: L2.96XB1.33XH0.7 (mm)/L0.117XB0.052XH0.028 (inch); Capacitance: 21 uF; Mounting Type: SURFACE MOUNT;
NUF6107MNTBG
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; No. of Functions: 4; Width (mm): 1.35;
NUF6402MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: L3.0XB1.35XH1.0 (mm)/L0.118XB0.053XH0.039 (inch); Capacitance: 34 uF; Attenuation At Maximum Frequency: 30 dB;
NUF6406MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Dimensions: L3.0XB1.35XH1.0 (mm)/L0.118XB0.053XH0.039 (inch); Length: 3 mm; JESD-609 Code: e4; Minimum Operating Temperature: -40 Cel;
NUF6410MNT1G
NUF6410MNT1G by Onsemi is a 6-function data line filter with 20 dB attenuation at 800 MHz. Rated for 5V, it has 12 terminals and operates b/w -40 to 85°C. Ideal for applications requiring noise filtering in data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved