Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF6106FCT1 by Onsemi is a Data Line Filter with 6 functions and 15 terminals. It has a max operating temperature of 85 °C, min of -40°C, and a max DC resistance of 120 ohm. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions of L2.96xB1.33xH0.7 mm.
Median Price
$0.242
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.251
1k+ parts
$0.208
10k+ parts
$0.186
Verical
$0.232
Vyrian
$0.176
Digiode
$0.196
Chip Stock
Corohmni
Corphita
$0.185
Continental Prestige Electronics
$0.190
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
Having 6 different functions allows for versatile filtering capabilities, making this product suitable for various applications.
With 15 terminals, this data line filter offers ample connectivity options, ensuring compatibility with different setups.
Being a data line filter specifically designed for filtering data signals, this product provides effective noise reduction in data transmission.
With a high maximum operating temperature of 85 °C, this filter can withstand heat and maintain performance in various environments.
The low minimum operating temperature of -40 °C ensures the filter remains operational even in cold conditions.
The tin/lead terminal finish provides good solderability and conductivity, ensuring reliable connections.
The compact width of 1.33mm allows for space-saving installation and integration into tight spaces.
With a maximum DC resistance of 120 ohms, this filter offers low resistance for efficient signal filtering.
The small length of 2.96mm contributes to the overall compact size of the filter, making it suitable for applications with limited space.
The tape and reel packing method facilitates automated assembly processes, improving efficiency and ease of handling.
The surface mounting type enables easy and secure installation on PCBs, enhancing the product's reliability in electronic systems.
The compact dimensions of the filter make it suitable for integration in various electronic devices without occupying much space.
The plastic package material provides durability and protection to the filter components, ensuring long-term performance and reliability.
The low height of 0.7mm allows for a slim profile, making this filter ideal for applications where space constraints are a consideration.
The capacitance of 21 microfarads enables effective filtering of data signals, reducing noise and interference for improved signal quality.
Data Line Filters NUF6106FCT1 attributes and parameters. Explore more Data Line Filters devices from Onsemi
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
NUF6106FCT1 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
1N4148WT
Fairchild Semiconductor
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Gec Plessey Semiconductors
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Formosa Microsemi
BLM21PG331SH1D
Murata Manufacturing
BLM21PG331SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.09 ohm, output impedance of 330 OHM, and rated current of 1.5 A. Ideal for data line filtering applications at frequencies ranging from 100 MHz with surface mounting type.
BLM03AX241SN1D
Murata Manufacturing's BLM03AX241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.38 ohm, output impedance of 240 OHM, and rated current of 0.35 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM18PG471SN1
Murata Manufacturing's BLM18PG471SN1 is a FERRITE CHIP data line filter with 470 OHM output impedance, 1 A rated current, and 0.2 ohm max DC resistance. It operates b/w -55 to 125 °C and is ideal for surface mount applications requiring noise suppression in electronic circuits.
MMZ2012Y202B
TDK
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
NFM21CC222R1H3D
Murata Manufacturing's NFM21CC222R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2200uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression.
RB6122-50-0M3
Schaffner Holding Ag
RB6122-50-0M3 by Schaffner Holding Ag is a UL-approved data line filter with 600V rated voltage and 50A rated current. Featuring inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring noise suppression in data lines, it measures L61.0xB57.8xH38.0mm and has a max DC resistance of 0.0009 ohm.
744235510
Wuerth Elektronik & Kg
Wurth Elektronik 744235510 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 51uH and max DC resistance of 1 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with output impedance of 3000 OHM.
BLM31PG121SN1B
Murata's BLM31PG121SN1B is a chip bead filter with 2 terminals, rated for 3A current. With dimensions of L3.2xB1.6xH1.1mm, it operates b/w -55 to 125°C and offers an output impedance of 120Ω at frequencies ranging from 100MHz to DC. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
DLW5BTN501SQ2L
DLW5BTN501SQ2L by Murata Mfg is a Data Line Filter with 4 terminals, rated for 50V and 4A. It offers 10 Mohm min insulation resistance, operates b/w -40 to 85 °C, and has a max DC resistance of 0.019 ohm. Ideal for applications requiring output impedance of 500 OHM in surface mount configurations.
B82789C0513N002
The TDK B82789C0513N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 51uH. It operates b/w -55°C to 125°C and has a max DC resistance of 0.55 ohm. Ideal for applications requiring noise suppression in electronic circuits.
ILHB0805ER251V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .04 ohm; Rated Current: 3 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
BNX022-01L
BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.
MPZ2012S331AT
TDK's MPZ2012S331AT is an 0805 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it has a DC resistance of 0.05 ohm and output impedance of 330 ohm, suitable for noise suppression in electronic circuits.
MPZ1608S601ATD25
TDK's MPZ1608S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.15 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 mm and can handle a rated current of 1 A.
DLW5BSN302SQ2L
DLW5BSN302SQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It operates b/w -40 to 85°C, offering high insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines with surface mount installation.
NFM18CC221R1C3D
Murata Manufacturing's NFM18CC221R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 220uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of data lines in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF6400MNTBG
Onsemi
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Length: 3 mm; Packing Method: TAPE AND REEL; Approvals (V): IEC; Terminal Finish: NICKEL PALLADIUM GOLD;
NUF6401MNT1G
NUF6401MNT1G by Onsemi is a 5V data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C, DC resistance of 115 ohm, and output impedance of 50 ohm. Ideal for IEC-approved applications requiring surface mount filters with dimensions L3.0XB1.35XH1.0 (mm).
NUF6001MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Rated Voltage: 5 V; Dimensions: L2.5XB1.2XH0.55 (mm)/L0.098XB0.047XH0.022 (inch); Attenuation At Maximum Frequency: 30 dB; Package Material: PLASTIC;
NUF6005MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -40 Cel; No. of Terminals: 12; Package Material: PLASTIC;
NUF6010MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; No. of Terminals: 12; Capacitance: 14 uF; Package Material: PLASTIC; Output Impedance (ohm): 50 OHM;
NUF6105FCT1
NUF6105FCT1 by Onsemi is a 6-function data line filter with 35 dB attenuation at 800 MHz. Rated for 5V, it has a max DC resistance of 120 ohm and output impedance of 50 ohm. Ideal for applications requiring noise filtering in data lines, it operates b/w -40 to 85°C temperatures.
NUF6105FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Approvals (V): IEC; Rated Voltage: 5 V; Height: .7 mm; Mounting Type: SURFACE MOUNT;
NUF6106FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Dimensions: L2.96XB1.33XH0.7 (mm)/L0.117XB0.052XH0.028 (inch); Capacitance: 21 uF; Mounting Type: SURFACE MOUNT;
NUF6107MNTBG
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; No. of Functions: 4; Width (mm): 1.35;
NUF6402MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: L3.0XB1.35XH1.0 (mm)/L0.118XB0.053XH0.039 (inch); Capacitance: 34 uF; Attenuation At Maximum Frequency: 30 dB;
NUF6406MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Dimensions: L3.0XB1.35XH1.0 (mm)/L0.118XB0.053XH0.039 (inch); Length: 3 mm; JESD-609 Code: e4; Minimum Operating Temperature: -40 Cel;
NUF6410MNT1G
NUF6410MNT1G by Onsemi is a 6-function data line filter with 20 dB attenuation at 800 MHz. Rated for 5V, it has 12 terminals and operates b/w -40 to 85°C. Ideal for applications requiring noise filtering in data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved