Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF6406MNT1G by Onsemi is a data line filter with 6 functions, rated at 5V. It offers 30dB attenuation at 800MHz, operating b/w -40 to 85 °C. Widely used in applications requiring high-frequency noise suppression and signal integrity maintenance.
Median Price
$0.272
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.225
10k+ parts
$0.201
DigiKey
$0.340
Verical
$0.251
Avnet
Digiode
$0.217
Chip Stock
Vyrian
Inventory MP
Bristol Electronics
Corohmni
$0.194
Corphita
$0.205
AZTECH Wire
$7.380
$7.090
$6.950
$6.810
Continental Prestige Electronics
$0.210
Perfect Parts
Kepictronics
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
Assy Fe
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Futuretech Components
This product has passed IEC approvals for up to 5V, ensuring safety and quality standards are met.
Designed to handle voltage up to 5V, making it suitable for various applications within that range.
With 12 terminals, this filter can efficiently manage multiple connections and data lines.
Provides high attenuation at the maximum frequency of 800 MHz, reducing interference and noise for clearer data transmission.
Can operate at high temperatures of up to 85 °C, ensuring reliability in various environmental conditions.
Surface mount design makes installation easy and saves space, suitable for compact electronic devices.
With a capacitance of 26 uF, this filter can efficiently store and release electrical energy as needed.
Data Line Filters NUF6406MNT1G attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Maximum Attenuation Frequency:
Attenuation At Maximum Frequency:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Rated Voltage:
Sub-Category:
Terminal Finish:
Width (mm):
NUF6406MNT1G Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Devices 31/Jan/2019
PCN Assembly/Origin - NUF64YYY 25/Sep/2018
PCN Packaging - Covering Tape/Material Chg 20/May/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
General Semiconductor
Itt Semiconductor
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
IRLML6402TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
EU2B-YS3303C
Idec
ROTARY SWITCH;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Wuxi Xuyang Electronic
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
ACF321825-471-TD01
TDK
TDK ACF321825-471-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 180 MHz. It offers 1000 Mohm insulation resistance, rated voltage of 20 V, and 0.15 ohm max DC resistance. Ideal for data line filtering in surface mount applications due to its compact dimensions (L3.2XB1.8XH2.5 mm).
FCFBMH3225HM601NT
Taiyo Yuden
Taiyo Yuden's FCFBMH3225HM601NT is a Ferrite Chip Data Line Filter with 2 terminals, 600 OHM output impedance, and 3A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C and has a compact size of L3.2xB2.5xH2.5mm.
B82790S0513N201
TDK B82790S0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Operating b/w -40°C to 125°C, it has a max DC resistance of 0.14 ohm. Ideal for applications requiring noise suppression in data lines, it comes in surface mount packaging with dimensions of L7.1xB6.0xH4.9mm.
SRF0905-652Y
Bourns
Bourns SRF0905-652Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 6500uH. It operates b/w -40°C to 105°C, has a max DC resistance of 1.05 ohm, and output impedance of 5000 ohm. This filter is ideal for applications requiring noise suppression in data lines.
742792096
Wuerth Elektronik & Kg
742792096 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It has dimensions of L2.0xB1.2xH0.9 (mm) and operates b/w -55 to 125 °C, offering a max DC resistance of 0.3 ohm at 100 MHz frequency. Ideal for maintaining signal integrity in electronic circuits with an output impedance of 1000 OHM and rated current of 1 A.
BLM21BD601SN1D
Murata Manufacturing
Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.
742792037
Wurth Elektronik 742792037 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a DC resistance of 0.08 ohm and output impedance of 330 OHM. Measuring L2.0XB1.2XH0.9 (mm), it has a max frequency of 250 MHz and rated current of 2 A, making it ideal for surface mount installations in electronic devices.
BLM03AX102SN1D
Murata Manufacturing's BLM03AX102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 1.25 ohm, output impedance of 1000 OHM, and rated current of 0.2 A. Ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions L0.6XB0.3XH0.3 (mm).
BLM18AG331SN1D
Murata Manufacturing's BLM18AG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.3Ω at a frequency range of 100MHz, suitable for surface mount applications in electronic devices requiring noise suppression on data lines.
EMI9408MUTAG
Onsemi
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
PA4339.501NLT
Pulse Electronics
PA4339.501NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 4uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 5A.
MLB-321611-1200PL
KITAGAWA ELECTRONICS PTE LTD
MLB-321611-1200PL by Kitagawa Electronics is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, 1200 OHM output impedance, and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies ranging from 100 MHz with a compact size of L3.2XB1.6XH1.1 mm for surface mount installation.
FBMH1608HM102-T
Taiyo Yuden's FBMH1608HM102-T is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -40 to 125 °C and has a max DC resistance of 0.35 ohm. Ideal for surface mount applications, it offers an output impedance of 1000 OHM at a min frequency of 100 MHz.
BLM18PG471SH1J
Murata Manufacturing's BLM18PG471SH1J is a chip bead data line filter with 2 terminals, AEC-Q200 screening. With dimensions of 1.6x0.8x0.8mm, it offers 470 OHM output impedance and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to its ferrite construction and rated current of 1A.
BLM15HD182SN1D
Murata Manufacturing's BLM15HD182SN1D is a chip bead data line filter with 2 terminals, rated for 0.2A current. With dimensions of L1.0xB0.5xH0.5 (mm), it operates b/w -55 to 125°C and offers an output impedance of 1800 ohm. Ideal for surface mount applications, this ferrite chip filter has a frequency range from 100MHz to 1000MHz.
NFM21CC102R1H3D
Murata Manufacturing's NFM21CC102R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and FEED THROUGH CAPACITOR type. It operates b/w -55 to 125 °C and has dimensions of L2.0XB1.25XH0.85 mm. Ideal for applications requiring high capacitance filtering at 1A current rating.
NFM21PS106B0J3D
Murata Manufacturing's NFM21PS106B0J3D is a data line filter with 4 terminals, rated at 6.3V and 4A. Featuring a feed-through capacitor type, it offers high insulation resistance of 50 Mohm. Ideal for applications requiring filtering capabilities in electronic circuits operating b/w -40°C to 85°C.
IP4252CZ8-4-TTL,13
NXP Semiconductors
IP4252CZ8-4-TTL,13 by NXP Semiconductors is a data line filter with 8 terminals. It operates b/w -40°C to 85°C and is surface mountable. Ideal for applications requiring noise filtering in data transmission systems.
742792040
Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF6400MNTBG
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Length: 3 mm; Packing Method: TAPE AND REEL; Approvals (V): IEC; Terminal Finish: NICKEL PALLADIUM GOLD;
NUF6401MNT1G
NUF6401MNT1G by Onsemi is a 5V data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C, DC resistance of 115 ohm, and output impedance of 50 ohm. Ideal for IEC-approved applications requiring surface mount filters with dimensions L3.0XB1.35XH1.0 (mm).
NUF6001MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Rated Voltage: 5 V; Dimensions: L2.5XB1.2XH0.55 (mm)/L0.098XB0.047XH0.022 (inch); Attenuation At Maximum Frequency: 30 dB; Package Material: PLASTIC;
NUF6005MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -40 Cel; No. of Terminals: 12; Package Material: PLASTIC;
NUF6010MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; No. of Terminals: 12; Capacitance: 14 uF; Package Material: PLASTIC; Output Impedance (ohm): 50 OHM;
NUF6105FCT1
NUF6105FCT1 by Onsemi is a 6-function data line filter with 35 dB attenuation at 800 MHz. Rated for 5V, it has a max DC resistance of 120 ohm and output impedance of 50 ohm. Ideal for applications requiring noise filtering in data lines, it operates b/w -40 to 85°C temperatures.
NUF6105FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Approvals (V): IEC; Rated Voltage: 5 V; Height: .7 mm; Mounting Type: SURFACE MOUNT;
NUF6106FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Length: 2.96 mm; Width (mm): 1.33; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
NUF6106FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Dimensions: L2.96XB1.33XH0.7 (mm)/L0.117XB0.052XH0.028 (inch); Capacitance: 21 uF; Mounting Type: SURFACE MOUNT;
NUF6107MNTBG
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; No. of Functions: 4; Width (mm): 1.35;
NUF6402MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: L3.0XB1.35XH1.0 (mm)/L0.118XB0.053XH0.039 (inch); Capacitance: 34 uF; Attenuation At Maximum Frequency: 30 dB;
NUF6410MNT1G
NUF6410MNT1G by Onsemi is a 6-function data line filter with 20 dB attenuation at 800 MHz. Rated for 5V, it has 12 terminals and operates b/w -40 to 85°C. Ideal for applications requiring noise filtering in data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved