Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DLW21SN121SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max operating temperature of 85°C and min insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines, it has dimensions of L2.0xB1.2xH1.2 (mm) and operates at a rated current of 0.37A.
Median Price
$0.204
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Arrow
1+ parts
$0.040
100+ parts
$0.039
1k+ parts
-
10k+ parts
DigiKey
$0.430
$0.290
$0.239
Mouser Electronics
$0.291
$0.230
$0.210
TTI Europe
$0.121
TTI
$0.222
Verical
$0.186
$0.139
Farnell
$0.181
$0.145
$0.134
Chip1Stop
$0.246
$0.173
Maritex
$0.214
$0.147
$0.095
Nova Conductors
TME
$0.320
$0.157
$0.117
Freelance Electronics
$0.340
$0.357
$0.337
Bristol Electronics
$0.519
$0.192
$0.135
Chip Stock
IBS Electronics
$0.325
Vyrian
Dan-Mar Components
Connector Distribution Corp
Right Parts Inc.
A&K Electronics
Rotakorn
LIBRA Elektronik GmbH
Prism Electronics
Pegasus Components GmbH
Sensible Micro Corp
Semicontronic
$0.103
$0.100
Bastille Electronics
$0.227
$0.216
$0.213
Argo Parts USA
$0.232
Continental Prestige Electronics
$0.234
CoreStaff
$0.395
$0.138
$0.089
Aztec Data Supply Inc.
$1.460
Corohmni
$1.818
Eastek
Kepictronics
ChipstoGo Electronic ltd
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
High insulation resistance ensures reliable performance and prevents leakage of current.
Having 2 functions provides better filtering capabilities for data lines.
Suitable for data lines with up to 50 volts, ensuring compatibility with a wide range of devices.
With 4 terminals, this data line filter can easily be connected to various devices and circuits.
Specifically designed for data lines, offering effective filtering to reduce noise and interference.
Can operate in high temperature environments without compromising performance.
Can tolerate low temperatures, making it suitable for use in a variety of conditions.
TIN terminal finish provides good conductivity and corrosion resistance for long-lasting performance.
Compact design with a width of 1.2mm allows for easy integration into various electronic devices.
Low DC resistance helps in maintaining signal integrity and efficiency of data transmission.
Small length of 2mm saves space and allows for flexible placement within electronic circuits.
Provides the desired impedance matching for data lines, ensuring optimal signal transfer.
Convenient packing method for automated assembly and storage, reducing handling time and costs.
Surface mount design allows for easy and secure installation on PCBs.
Compact dimensions make this data line filter suitable for small electronic devices and tight spaces.
With a rated current of 0.37A, this filter can handle moderate current loads effectively.
Low profile height of 1.2mm ensures easy integration and space-saving in electronic assemblies.
Data Line Filters DLW21SN121SQ2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
DLW21SN121SQ2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
ROHM
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Synsemi
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Philips Components
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech Electronics
ACP3225-501-2P-T000
TDK
TDK's ACP3225-501-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 2A. With dimensions of L3.2xB2.5xH1.9 (mm), it offers high insulation resistance for data line filtering applications in various electronic devices.
74279273
Wuerth Elektronik & Kg
Wurth Elektronik 74279273 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 (mm). Featuring a max frequency of 600 MHz and rated current of 2A, it offers an output impedance of 20 OHM.
742863160
Wurth Elektronik 742863160 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.5A. It has a max operating temperature of 125°C and min of -55°C. Ideal for IEC-approved applications requiring output impedance of 600Ω in a compact size of L1.6xB0.8xH0.8mm.
SNUF6401MNT1G
SNUF6401MNT1G by Onsemi is a data line filter with 6 functions, AEC-Q100 screening level, and 12 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 115 ohm, and output impedance of 50 ohm. Widely used in automotive applications for noise filtering in data lines due to its compact dimensions (L3.0XB1.35XH1.0 mm).
DLW43SH101XK2K
Murata Manufacturing
DLW43SH101XK2K by Murata Manufacturing is a FERRITE CHIP filter with 100uH inductance and 10 Mohm min insulation resistance. It has 2 functions, rated at 50V and 0.2A, suitable for AEC-Q200 applications in automotive electronics due to its compact size of L4.5xB3.2xH2.6mm for surface mounting.
ACM4520V-142-2P-T00
ACM4520V-142-2P-T00 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring high output impedance and insulation resistance in compact surface mount design.
BLM18SG121TN1B
Murata Manufacturing's BLM18SG121TN1B is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.025 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in 0603 case code is ideal for surface mount applications requiring effective noise suppression.
BLM15BB121SN1D
Murata Manufacturing's BLM15BB121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and output impedance of 120 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.3 A and DC resistance of 0.55 ohm, making it suitable for noise suppression in electronic circuits.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
USBUF02W6
USBUF02W6 by STMicroelectronics is a DATA LINE FILTER with 6 terminals, UL approved, and MIL-STD-883E screened. It has a max operating temperature of 125°C and min of -40°C. With a capacitance of 100uF, it is ideal for data line filtering applications in various electronic devices.
7448225007
7448225007 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has 2 functions, 4 terminals, and an inductance of 700uH. This panel mount filter is UL approved and commonly used for filtering data lines in electronic applications.
7448261418
Wurth Elektronik 7448261418 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1800uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.0079 ohm, and can handle up to 14A current. Ideal for applications requiring noise suppression in data lines.
7427927160
Wurth Elektronik 7427927160 is a FERRITE CHIP data line filter with 2 terminals, rated at 0.4A. It operates b/w -55 to 125 °C and has a max DC resistance of 0.3 ohm. Suitable for surface mount applications, it offers an output impedance of 60 OHM and comes in dimensions L1.0xB0.5xH0.5 mm, ideal for noise suppression in electronic circuits.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
MMZ1608R601ATD25
TDK MMZ1608R601ATD25 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.4 ohm and an output impedance of 600 ohm. AEC-Q200 screening makes it suitable for automotive applications, ensuring reliable performance in extreme temperatures from -55°C to 125°C.
ACT45B-110-2P-TL003
The TDK ACT45B-110-2P-TL003 is a FERRITE CHIP filter with 2 functions, rated for 50V and 0.25A. With dimensions of L4.5XB3.2XH2.8 (mm), it offers high insulation resistance suitable for data line applications at temperatures ranging from -40 to 150 °C.
MMZ1608S102ATA00
The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW21SN900SQ2L
Murata Manufacturing's DLW21SN900SQ2L is a Data Line Filter with 2 functions, rated at 50V. With a min insulation resistance of 10 Mohm, it operates b/w -40 to 85 °C and has a max DC resistance of 0.35 ohm. This surface mount filter, measuring L2.0xB1.2xH1.2 (mm), is ideal for applications requiring an output impedance of 90 OHM and a rated current of 0.33 A.
DLW21HN900SQ2L
Murata Manufacturing's DLW21HN900SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a min insulation resistance of 10 Mohm and max operating temperature of 85°C. Ideal for applications requiring filtering in data lines with dimensions of L2.0xB1.2xH0.9 (mm).
DLW21HN181SQ2L
Murata Manufacturing's DLW21HN181SQ2L is a data line filter with 2 functions, rated at 50V and 0.25A. It offers a max DC resistance of 0.5 ohm and an output impedance of 180 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L2.0xB1.2xH0.9 (mm), it is designed for surface mount installation in electronic devices operating b/w -40°C to 85°C.
DLW21HN121SQ2L
DLW21HN121SQ2L by Murata is a Data Line Filter with 2 functions and rated voltage of 50V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is suitable for applications requiring noise suppression in data lines.
DLW21HN670SQ2L
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Rated Current: .33 A; JESD-609 Code: e3; Additional Features: OPEN MAGNETIC ONE CIRCUIT TYPE; Minimum Operating Temperature: -40 Cel;
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
DLW21HN670HQ2L
DATA LINE FILTER; Maximum DC Resistance: .49 ohm; Rated Current: .24 A; Minimum Insulation Resistance: 10 Mohm; No. of Functions: 2; Length: 2 mm;
DLW21SN900SQ2B
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Rated Current: .33 A; Rated Voltage: 50 V; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
DLW21SN900SQ2
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Rated Current: .33 A; Width (mm): 1.2; Minimum Insulation Resistance: 10 Mohm; Output Impedance (ohm): 90 OHM;
DLW21SN670SQ2L
DATA LINE FILTER; Maximum DC Resistance: .25 ohm; Rated Current: .4 A; No. of Terminals: 4; Packing Method: TAPE AND REEL; No. of Functions: 2;
DLW21SN900HQ2B
Murata Manufacturing's DLW21SN900HQ2B is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers a min insulation resistance of 10 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring high impedance filtering in compact spaces.
DLW21SN181SQ2L
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Rated Current: .33 A; Dimensions: L2.0XB1.2XH1.2 (mm)/L0.079XB0.047XH0.047 (inch); Minimum Insulation Resistance: 10 Mohm; Packing Method: TAPE AND REEL;
DLW21SZ900HQ2L
DATA LINE FILTER; Maximum DC Resistance: .41 ohm; Rated Current: .28 A; Minimum Insulation Resistance: 10 Mohm; Length: 2 mm; Mounting Type: SURFACE MOUNT;
DLW21SH900HQ2L
DATA LINE FILTER; Maximum DC Resistance: .416 ohm; Rated Current: .28 A; Mounting Type: SURFACE MOUNT; Screening Level: AEC-Q200; Packing Method: TR, EMBOSSED, 7 INCH;
DLW21SN121HQ2L
DATA LINE FILTER; Maximum DC Resistance: .41 ohm; Rated Current: .28 A; Dimensions: L2.0XB1.2XH1.2 (mm)/L0.079XB0.047XH0.047 (inch); Height: 1.2 mm; No. of Functions: 2;
DLW21SN921SK2L
DATA LINE FILTER; Maximum DC Resistance: .95 ohm; Rated Current: .16 A; No. of Functions: 2; Maximum Operating Temperature: 85 Cel; Height: 1.2 mm;
DLW21SN501SK2L
DATA LINE FILTER; Maximum DC Resistance: .5 ohm; Rated Current: .25 A; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Dimensions: L2.0XB1.2XH1.2 (mm)/L0.079XB0.047XH0.047 (inch);
DLW21HN900HQ2L
DLW21HN900HQ2L by Murata is a data line filter with 2 functions, rated voltage of 20V, and insulation resistance of 10 Mohm. It operates b/w -40 to 85 °C and has dimensions of L2.0XB1.2XH0.9 (mm). Ideal for applications requiring filtering in data lines at a max current of 0.22A.
DLW21SN121SQ2B
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .37 A; Dimensions: L2.0XB1.2XH1.2 (mm)/L0.079XB0.047XH0.047 (inch); Mounting Type: SURFACE MOUNT; Terminal Finish: TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved